From owner-freebsd-bugs  Sun Jun 18 15:34:44 1995
Return-Path: bugs-owner
Received: (from majordom@localhost)
          by freefall.cdrom.com (8.6.10/8.6.6) id PAA06668
          for bugs-outgoing; Sun, 18 Jun 1995 15:34:44 -0700
Received: from todonix.ping.de (root@todonix.ping.de [193.100.14.43])
          by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id PAA06656
          for <bugs@freebsd.org>; Sun, 18 Jun 1995 15:34:26 -0700
Received: by todonix.ping.de (Smail3.1.28.1 #1)
	id m0sNSsV-000720C; Mon, 19 Jun 95 00:31 MET DST
Message-Id: <m0sNSsV-000720C@todonix.ping.de>
From: jan@todonix.ping.de (Jan Wedekind)
Subject: 2.05R reboot hangs
To: bugs@freebsd.org
Date: Mon, 19 Jun 1995 00:31:39 +0200 (MET DST)
X-Mailer: ELM [version 2.4 PL23]
Content-Type: text
Content-Length: 2119      
Sender: bugs-owner@freebsd.org
Precedence: bulk

Hi,

sometimes the reboot hangs on an 486-DX4-100 PCI (ASUS4SP3G - Board).

the kernel config is as follows. (no more devices are configured!)

Jan

FreeBSD 2.0.5-RELEASE #5: Sun Jun 18 19:53:26 MET DST 1995
    root@leary:/usr/src/sys/compile/DEBUG
CPU: i486 DX4 (486-class CPU)
  Origin = "GenuineIntel"  Id = 0x480  Stepping=0
  Features=0x3<FPU,VME>
real memory  = 33161216 (8096 pages)
avail memory = 30523392 (7452 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <4 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 5 on isa
ed0: address 00:40:95:e0:29:37, type NE2000 (16 bit) 
lpt0 at 0x378-0x37f on isa
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
cy0 irq 10 maddr 0xd4000 msize 8192 on isa
cy1 irq 11 maddr 0xd6000 msize 8192 on isa
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
Probing for devices on the pci0 bus:
        configuration mode 2 allows 16 devices.
chip0 <Intel 82424ZX cache DRAM controller> rev 4 on pci0:0
ncr0 <ncr 53c810 scsi> rev 1 int a irq 14 on pci0:1
        reg20: virtual=0xf4a48000 physical=0xfbfef000 size=0x100
ncr0: restart (scsi reset).
ncr0 scanning for targets 0..6 (V2 pl21 95/03/21)
(ncr0:0:0): "FUJITSU M2684S-512 2035" type 0 fixed SCSI 2
sd0(ncr0:0:0): Direct-Access 
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
507MB (1039329 512 byte sectors)
chip1 <Intel 82378IB PCI-ISA bridge> rev 3 on pci0:2
vga0 <VGA-compatible display device> rev 0 int a irq 15 on pci0:5
ncr1 <ncr 53c810 scsi> rev 2 int a irq 9 on pci0:6
        reg20: virtual=0xf4a49000 physical=0xfafff000 size=0x100
ncr1: restart (scsi reset).
ncr1 scanning for targets 0..6 (V2 pl21 95/03/21)
(ncr1:4:0): "HP HP35470A 1109" type 1 removable SCSI 2
st0(ncr1:4:0): Sequential-Access 
st0(ncr1:4:0): 200ns (5 Mb/sec) offset 8.
density code 0x13,  drive empty
pci0: uses 8389120 bytes of memory from fafff000 upto fbfef0ff.
pci0: uses 512 bytes of I/O space from e400 upto e8ff.
pid 178: tail: uid 0: exited on signal 3