From owner-freebsd-questions Tue Jun 22 11:52: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw2.roguewave.com (fw2.roguewave.com [208.151.233.2]) by hub.freebsd.org (Postfix) with ESMTP id 9B30815474 for ; Tue, 22 Jun 1999 11:52:00 -0700 (PDT) (envelope-from carey@roguewave.com) Received: by fw2.roguewave.com; id TAA13283; Tue, 22 Jun 1999 19:55:32 -0700 (PDT) Received: from cvo1.cvo.roguewave.com(10.68.4.36) via SMTP by hub.FreeBSD.ORG, id smtpd013199; Tue Jun 22 19:55:27 1999 Received: by CVO1 with Internet Mail Service (5.5.1960.3) id ; Tue, 22 Jun 1999 11:53:36 -0700 Message-ID: From: Woody Carey To: "'Doug White'" Cc: "'freebsd-questions@freebsd.org'" Subject: RE: CDROM drive doesn't probe if no CD present [Was:cannot mount cd indicates bad ide cd drive - replace?] Date: Tue, 22 Jun 1999 11:53:29 -0700 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.1960.3) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Ok, here is some more information: Here is the behavior when there is no cd in the drive at bootup [reboot, actually] Script started on Tue Jun 22 06:35:25 1999 myname# more /etc/fstab ^[[25;1H^[[K# Device Mountpoint FStype Options Dump Pass# /dev/wd0s1b none swap sw 0 0 /dev/wd0s1a / ufs rw 1 1 /dev/wd0s1f /usr ufs rw 2 2 /dev/wd0s1e /var ufs rw 2 2 /dev/wcd0c /cdrom cd9660 ro,noauto 0 0 proc /proc procfs rw 0 0 ^M^[[Kmyname# mount /cdrom cd9660: Input/output error myname# dmesg Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-RELEASE #2: Sun Jun 20 21:53:08 PDT 1999 root@myname.my.domain:/usr/src/sys/compile/REDWOOD Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II (686-class CPU) Origin = "GenuineIntel" Id = 0x634 Stepping=4 Features=0x80fbff di zp0 config> di ze0 config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di ed0 config> di cs0 config> di wt0 config> di mcd0 config> di matcdc0 No such device: matcdc0 Invalid command or syntax. Type `?' for help. config> di bt0 config> di aha0 config> di adv0 config> en sio2 config> po sio2 0x3e8 config> ir sio2 5 config> q avail memory = 127012864 (124036K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc0356000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc035609c. Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 chip1: rev 0x02 on pci0.1.0 chip2: rev 0x02 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip3: rev 0x02 on pci0.7.3 xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x30 int a irq 17 on pci0.17.0 xl0: Ethernet address: 00:10:5a:14:cb:51 xl0: autoneg complete, link status good (full-duplex, 100Mbps) Probing for devices on PCI bus 1: vga0: rev 0x01 int a irq 2 on pci1.0.0 Probing for PnP devices: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: configured irq 5 not in bitmap of probed irqs 0 sio2 not found at 0x3e8 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 4341MB (8890560 sectors), 9408 cyls, 15 heads, 63 S/T, 512 B/S wdc0: unit 1 (atapi): , removable, accel, dma, iordy acd0: drive speed 0 - 4125KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked wdc1 not found at 0x170 scd0 not found at 0x230 ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 lpt0: on ppbus 0 lpt0: Interrupt-driven port vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 changing root device to wd0s1a SMP: AP CPU #1 Launched! acd0: read_toc failed acd0: read_toc failed acd0: read_toc failed acd0: read_toc failed acd0: read_toc failed and here is the dmesg output and mount output with a cd in the drive at boot: Script started on Tue Jun 22 06:39:01 1999 You have mail. myname# dmesg Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-RELEASE #2: Sun Jun 20 21:53:08 PDT 1999 root@myname.my.domain:/usr/src/sys/compile/REDWOOD Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II (686-class CPU) Origin = "GenuineIntel" Id = 0x634 Stepping=4 Features=0x80fbff real memory = 134217728 (131072K bytes) config> di zp0 config> di ze0 config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di cs0 config> di wt0 config> di mcd0 config> di matcdc0 No such device: matcdc0 Invalid command or syntax. Type `?' for help. config> di bt0 config> di aha0 config> di adv0 config> en sio2 config> po sio2 0x3e8 config> ir sio2 5 config> f sio2 0 config> q avail memory = 127012864 (124036K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc0356000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc035609c. chip0: rev 0x02 on pci0.0.0 chip1: rev 0x02 on pci0.1.0 chip2: rev 0x02 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip3: rev 0x02 on pci0.7.3 xl0: <3Com 3c905B-TX Fast Etherlink XL> rev 0x30 int a irq 17 on pci0.17.0 xl0: Ethernet address: 00:10:5a:14:cb:51 xl0: autoneg complete, link status good (full-duplex, 100Mbps) Probing for devices on PCI bus 1: vga0: rev 0x01 int a irq 2 on pci1.0.0 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 not found at 0x3e8 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 4341MB (8890560 sectors), 9408 cyls, 15 heads, 63 S/T, 512 B/S wdc0: unit 1 (atapi): , removable, accel, dma, iordy acd0: drive speed 4125KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm data disc loaded, unlocked wdc1 not found at 0x170 scd0 not found at 0x230 ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 lpt0: on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 changing root device to wd0s1a SMP: AP CPU #1 Launched! myname# mount /cdrom There was some success message on the console after this mount indicating success. It did not appear in this script output, obviously. Here is my kernel config file: # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.143.2.12 1999/05/14 15:12:26 jkh Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" #cpu "I586_CPU" cpu "I686_CPU" ident REDWOOD maxusers 64 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed #options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 # To make an SMP kernel, the next two are needed options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): options NCPU=2 # number of CPUs options NBUS=3 # number of busses options NAPIC=1 # number of IO APICs options NINTR=24 # number of INTs controller isa0 controller pnp0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 controller adv0 at isa? port ? cam irq ? controller adw0 controller bt0 at isa? port ? cam irq ? controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 device mcd0 at isa? port 0x300 bio irq 10 #controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # device ax0 # ASIX AX88140A device de0 # DEC/Intel DC21x4x (``Tulip'') device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) device pn0 # Lite-On 82c168/82c169 (``PNIC'') device rl0 # RealTek 8129/8139 device tl0 # Texas Instruments ThunderLAN device tx0 # SMC 9432TX (83c170 ``EPIC'') device vr0 # VIA Rhine, Rhine II device vx0 # 3Com 3c590, 3c595 (``Vortex'') device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 device ex0 at isa? port? net irq? device fe0 at isa? port 0x300 net irq ? device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 net irq 10 drq 0 device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 8 #Berkeley packet filter I know, I have alot of devices still to remove... Any request for tests, more information? Any ideas? > -----Original Message----- > From: Doug White [mailto:dwhite@resnet.uoregon.edu] > Sent: Monday, June 21, 1999 11:36 AM > To: Woody Carey > Cc: 'James R. Shrenk'; Joe Royce; Mark Thomas; > 'freebsd-questions@freebsd.org' > Subject: RE: cannot mount cd indicates bad ide cd drive - replace? > > > On Mon, 21 Jun 1999, Woody Carey wrote: > > > The below fstab entry you sent was what was in /etc/fstab, thanks. > > > > 'mount /cdrom' works on this machine *only if* a cd is in the drive > > during boot up. I have not tested this extensively. > > Please do test this, I'd be interested in seeing it. It > sounds like your > CDROM drive doesn't probe if there's no CD present, apparently. > > > Since this was not IIRC the behavior of my 2.2.5-RELEASE box (SCSI > > drives), this begs the question: Is this the _correct_ behavior? I > > suspect I have more to fix... > > No, it's not correct. :-) > > Doug White > Internet: dwhite@resnet.uoregon.edu | FreeBSD: The Power to Serve > http://gladstone.uoregon.edu/~dwhite | www.freebsd.org > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message