Date: Thu, 18 Mar 1999 19:07:51 +0100 (MET) From: "Gianmaria Collazuol (tel. 055/2307659)" <collazuo@fi.infn.it> To: aic7xxx@FreeBSD.ORG Subject: trouble with DLT 7000 TAPE DRIVER (fwd) Message-ID: <Pine.HPP.3.95a.990318190732.3988M-100000@hpepsi1.fi.infn.it>
next in thread | raw e-mail | index | archive | help
Hello,
Sorry to bother you with perhaps silly problem !
Working with: PC (2 x pentiumII x 350MHz) + RH linux 5.1
(kernel 2.1.131) + Adaptec AIC-7890/1 Ultra2 SCSI host adapter +
"Quantum DLT7000 Tape Driver" (plugged in scsi wide port).
Problem: cannot read (with dd) DLT tapes written (not by me, not with
this hardware, but perfectly readable by me with other hardware)
with 256k sized blocks: all file's blocks read OK but the last one:
while reading this one the command dd falls in "disk sleep" state
and cannot be killed or signalled anyhow.
These are the related messages in the /var/log/messages file:
Mar 16 16:43:04 pcepsi3 kernel: st0: Block limits 2 - 16777214 bytes.
Mar 16 16:43:04 pcepsi3 kernel: st0: Mode sense. Length 11, medium 85, WBS 90,BLL 8
Mar 16 16:43:04 pcepsi3 kernel: st0: Density 1b, tape length: 0, drv buffer: 1
Mar 16 16:43:04 pcepsi3 kernel: st0: Block size: 0, buffer size: 524288 (1blocks).
Mar 16 16:43:04 pcepsi3 kernel: st0: Write protected
(command: mt -t /dev/nst0 setblk 262144 --->)
Mar 16 16:44:13 pcepsi3 kernel: st0: Block limits 2 - 16777214 bytes.
Mar 16 16:44:13 pcepsi3 kernel: st0: Mode sense. Length 11, medium 85, WBS 90,BLL 8
Mar 16 16:44:13 pcepsi3 kernel: st0: Density 1b, tape length: 0, drv buffer: 1
Mar 16 16:44:13 pcepsi3 kernel: st0: Block size: 0, buffer size: 524288 (1 blocks).
Mar 16 16:44:13 pcepsi3 kernel: st0: Write protected
Mar 16 16:44:13 pcepsi3 kernel: st0: Setting block size to 262144 bytes.
(command: mt -t /dev/nst0 rewind --->)
Mar 16 16:44:46 pcepsi3 kernel: st0: Block limits 2 - 16777214 bytes.
Mar 16 16:44:46 pcepsi3 kernel: st0: Mode sense. Length 11, medium 85, WBS 90, BLL 8
Mar 16 16:44:46 pcepsi3 kernel: st0: Density 1b, tape length: 0, drv buffer: 1
Mar 16 16:44:46 pcepsi3 kernel: st0: Block size: 262144, buffer size: 524288 (1 blocks).
Mar 16 16:44:46 pcepsi3 kernel: st0: Write protected
Mar 16 16:44:46 pcepsi3 kernel: st0: Rewinding tape.
(command: mt -t /dev/nst0 fsf 1 --->)
Mar 16 16:44:50 pcepsi3 kernel: st0: Block limits 2 - 16777214 bytes.
Mar 16 16:44:50 pcepsi3 kernel: st0: Mode sense. Length 11, medium 85, WBS 90,BLL 8
Mar 16 16:44:50 pcepsi3 kernel: st0: Density 1b, tape length: 0, drv buffer: 1
Mar 16 16:44:50 pcepsi3 kernel: st0: Block size: 262144, buffer size: 524288 (2 blocks).
Mar 16 16:44:50 pcepsi3 kernel: st0: Write protected
Mar 16 16:44:50 pcepsi3 kernel: st0: Spacing tape forward over 1 filemarks.
(command: dd if=/dev/nst0 of=... bs=262144 --->)
Mar 16 16:45:52 pcepsi3 kernel: st0: Block limits 2 - 16777214 bytes.
Mar 16 16:45:52 pcepsi3 kernel: st0: Mode sense. Length 11, medium 85, WBS 90, BLL 8
Mar 16 16:45:52 pcepsi3 kernel: st0: Density 1b, tape length: 0, drv buffer: 1
Mar 16 16:45:52 pcepsi3 kernel: st0: Block size: 262144, buffer size: 524288 (2 blocks).
Mar 16 16:45:52 pcepsi3 kernel: st0: Write protected
Mar 16 16:45:52 pcepsi3 kernel: st0: EOF/EOM flag up (2). Bytes 0
Mar 16 16:45:52 pcepsi3 kernel: st0: EOF up (2). Left 524288, needed 262144.
(reading & writing on disk ~300Mb of blocks until the last one in the file ...)
Mar 16 16:47:19 pcepsi3 kernel: (scsi0:0:0:-1) Unexpected busfree, LASTPHASE = 0xa0, SEQADDR = 0x15d
Mar 16 17:02:19 pcepsi3 kernel: scsi : aborting command due to timeout : pid43360,
scsi0, channel 0, id 0, lun 0 Read (6) 01 00 00 02 00
Mar 16 17:02:19 pcepsi3 kernel: (scsi0:0:0:-1) Unexpected busfree, LASTPHASE = 0xa0, SEQADDR = 0x15d
Any suggestion ?
Many thanks and sorry again.
Gianmaria Collazuol, Ph.D. student
Phisics Department, Universita` di Firenze (Italy) and
NA48/EPSI Experiment, CERN (Switzerland).
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.HPP.3.95a.990318190732.3988M-100000>