Date: Thu, 13 Feb 1997 22:58:58 +1100 (EST) From: Carey Nairn <cp_nairn@ccd.tas.gov.au> To: questions@freebsd.org Subject: gimp and 2.1.5R Message-ID: <Pine.BSI.3.93.970213224118.1883A-100000@krondor.cpn.org.au>
next in thread | raw e-mail | index | archive | help
Hi all,
I am having trouble running the gimp-0.54 binary found on
ftp.xcf.berkeley.edu. When I run the program, all seems ok until I try to
open more than about 4 windows. At this point the program either dies
with a sigbus error or a seg fault, stating that it can't allocate 65535
bytes.
Correspondence with the gimp-user mailing list suggested increasing SYSV
shared memory. I did this with the following line:
options "SHMMAXPGS=8192"
I have tried values of 1024, 2048, 4096 and 8192 all with the same result.
I have also tried compiling a couple of the developer versions with no
success.
does anyone have gimp running on a 2.1.5 system? The software looks very
promising but isn't much use if I can't have more than 3 windows open at
once.
Any suggestions??
cheers
Carey Nairn
dmesg output follows:
FreeBSD 2.1.5-RELEASE #0: Thu Feb 13 20:57:37 EST 1997
cp_nairn@krondor.cpn.org.au:/usr/src/sys/compile/KRONDOR
CPU: 167-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping=12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
FreeBSD Kernel Configuration Utility - Version 1.0
Type "help" for help or "visual" to go to the visual
configuration interface (requires MGA/VGA display or
serial terminal capable of displaying ANSI graphics).
config> disable wdc0
config> disable wdc1
config> q
avail memory = 30744576 (30024K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82439> rev 3 on pci0:0
chip1 <Intel 82371 PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371 Bus-Master IDE controller> rev 0 on pci0:7:1
vga0 <VGA-compatible display device> rev 0 int a irq 12 on pci0:11
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:12
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:0:0): "SEAGATE ST32155W 0528" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 2049MB (4197405 512 byte sectors)
(ahc0:5:0): "MATSHITA CD-ROM CR-506 8S04" type 5 removable SCSI 2
cd0(ahc0:5:0): CD-ROM cd present.[241035 x 2048 byte records]
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 10 on isa
ed0: address 00:c0:58:20:b0:45, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 not found at 0x3e8
sio3 not found at 0x2e8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0: disabled, not probed.
wdc1: disabled, not probed.
wt0 not found at 0x300
scd0 not found at 0x230
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isa
sb0: <SoundBlaster 16 4.13>
sbxvi0 at 0x0 drq 5 on isa
sbxvo0: <SoundBlaster 16 4.13>
sbmidi0 at 0x330 on isa
<SoundBlaster MPU-401>
opl0 at 0x388 on isa
opl0: <Yamaha OPL-3 FM>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.93.970213224118.1883A-100000>