Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 06 Oct 2006 16:33:44 +0200
From:      Fredrik Widlund <fredrik.widlund@qbrick.com>
To:        freebsd-current@freebsd.org
Subject:   Re: 6.2-BETA2 Dell PE1950
Message-ID:  <45266948.3070407@qbrick.com>
In-Reply-To: <4523AA3C.2000107@qbrick.com>
References:  <4522E54C.7060406@qbrick.com> <4523AA3C.2000107@qbrick.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,

I can't reproduce the problem. Everything is exactly the same, but I get
no timeouts and the nic seems to work without any problems.

Kind regards,
Fredrik Widlund


Fredrik Widlund wrote:
> Hi,
>
> An update, right now the BCE nic seems to work, I'm not sure exactly why
> yet. I'm attaching the dmesg however.
>
> SAS adapter is the PERC 5I, which is handled by the MPT driver in
> 6.2-Beta2. I'll continue to look at this. There are some unhandled
> events (0x12, 0x16), but these might not be needed.
>
> [mpi_ioc.h]
> #define MPI_EVENT_SAS_PHY_LINK_STATUS       (0x00000012)
> ...
> #define MPI_EVENT_SAS_DISCOVERY             (0x00000016)
>
> [dmesg mpt part]
> mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem
> 0xfc7fc000-0xfc7fffff,0xfc7e0000-0xfc7effff irq 64 at device 8.0 on pci2
> mpt0: [GIANT-LOCKED]
> mpt0: MPI Version=1.5.12.0
> mpt0: mpt_cam_event: 0x16
> mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
> mpt0: mpt_cam_event: 0x12
> mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
> mpt0: mpt_cam_event: 0x16
> mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
>
> Kind regards,
> Fredrik Widlund
>
> Fredrik Widlund wrote:
>   
>> Hi,
>>
>> I'm trying to get FreeBSD working on Dell 1950 (and 2950), which is
>> vital since it's no longer possible to buy 1850/2850 units here.
>>
>> Hardware:
>> PE1950 Xeon 5130, 2GB 667MHz
>> SAS 5I
>> PERC5E
>>
>> 6.1-RELEASE: not possible since SAS drives aren't found.
>> 6.2-BETA2: bce interfaces does not work at all, "watchdog timeout
>> occured" every other second, and _no_ connectivity.
>>
>> We are also having problems with some PE1850 failing from time to time
>> with "watchdog timeout" hangs, and have had to debug.mpsafenet=0 these.
>>
>> How can we help solve this issue? It would really be a pity to be
>> forced to leave FreeBSD but we really can't afford to replace our
>> choice of hardware platform.
>>
>> Kind regards,
>> Fredrik Widlund
>>
>>
>>
>>
>>
>> _______________________________________________
>> freebsd-current@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-current
>> To unsubscribe, send any mail to
>> "freebsd-current-unsubscribe@freebsd.org"
>>     
>
>   
> ------------------------------------------------------------------------
>
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.2-BETA2 #0: Mon Oct  2 03:32:44 UTC 2006
>     root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz (1995.01-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
>   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,
> HTT,TM,PBE>
>   Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,<b14>,<b15>,<b18>>
>   AMD Features=0x20100000<NX,LM>
>   AMD Features2=0x1<LAHF>
>   Cores per package: 2
> real memory  = 2147123200 (2047 MB)
> avail memory = 2096009216 (1998 MB)
> ACPI APIC Table: <DELL   PE_SC3  >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 2
> ioapic1: Changing APIC ID to 3
> ioapic1: WARNING: intbase 64 != expected base 24
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 64-87 on motherboard
> kbd1 at kbdmux0
> ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> acpi0: <DELL PE_SC3> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci5: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci5
> pci6: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci6
> pci7: <ACPI PCI bus> on pcib3
> pcib4: <PCI-PCI bridge> at device 0.0 on pci7
> pci8: <PCI bus> on pcib4
> bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci8
> bce0: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
> miibus0: <MII bus> on bce0
> brgphy0: <BCM5708C 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
> bce0: Ethernet address: 00:13:72:fb:cb:16
> pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci6
> pci9: <ACPI PCI bus> on pcib5
> pcib6: <PCI-PCI bridge> at device 0.3 on pci5
> pci10: <PCI bus> on pcib6
> pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci1: <ACPI PCI bus> on pcib7
> pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci1
> pci2: <ACPI PCI bus> on pcib8
> mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfc7fc000-0xfc7fffff,0xfc7e0000-0xfc7effff irq 64 at device 8.0 on pci2
> mpt0: [GIANT-LOCKED]
> mpt0: MPI Version=1.5.12.0
> mpt0: mpt_cam_event: 0x16
> mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
> mpt0: mpt_cam_event: 0x12
> mpt0: Unhandled Event Notify Frame. Event 0x12 (ACK not required).
> mpt0: mpt_cam_event: 0x16
> mpt0: Unhandled Event Notify Frame. Event 0x16 (ACK not required).
> pcib9: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci11: <ACPI PCI bus> on pcib9
> pcib10: <PCI-PCI bridge> at device 5.0 on pci0
> pci12: <PCI bus> on pcib10
> pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci13: <ACPI PCI bus> on pcib11
> pcib12: <PCI-PCI bridge> at device 0.0 on pci13
> pci14: <PCI bus> on pcib12
> mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff irq 18 at device 14.0 on pci14
> pcib13: <PCI-PCI bridge> at device 0.2 on pci13
> pci15: <PCI bus> on pcib13
> pcib14: <PCI-PCI bridge> at device 7.0 on pci0
> pci16: <PCI bus> on pcib14
> pcib15: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci3: <ACPI PCI bus> on pcib15
> pcib16: <PCI-PCI bridge> at device 0.0 on pci3
> pci4: <PCI bus> on pcib16
> bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1), v0.9.6> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci4
> bce1: ASIC ID 0x57081010; Revision (B1); PCI-X 64-bit 133MHz
> miibus1: <MII bus> on bce1
> brgphy1: <BCM5708C 10/100/1000baseTX PHY> on miibus1
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
> bce1: Ethernet address: 00:13:72:fb:cb:14
> uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 21 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 20 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <UHCI (generic) USB controller> port 0xcca0-0xccbf irq 21 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <UHCI (generic) USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc900000-0xfc9003ff irq 21 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb3: EHCI version 1.0
> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> usb3: <EHCI (generic) USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> uhub4: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2
> uhub4: multiple transaction translators
> uhub4: 4 ports with 4 removable, self powered
> pcib17: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci17: <ACPI PCI bus> on pcib17
> pci17: <display, VGA> at device 13.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: does not respond
> device_attach: fdc0 attach returned 6
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: does not respond
> device_attach: fdc0 attach returned 6
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xcf000-0xd07ff,0xec000-0xeffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
> ums0: 3 buttons and Z dir.
> ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1
> kbd2 at ukbd0
> uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1
> Timecounters tick every 1.000 msec
> acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33
> mfi0: 68 - PCI 0x041028 0x0415 0x041028 0x041f01: Firmware initialization started (PCI ID 0015/1028/1f01/1028)
> mfi0: 69 - Type 18: Firmware version 1.00.01-0081
> mfi0: 70 - Battery Present
> mfi0: 71 - Adapter ticks 213277741 elapsed 54s: Time established as 10/04/06 11:49:01; (54 seconds since power on)
> ses0 at mpt0 bus 0 target 8 lun 0
> ses0: <DP BACKPLANE 1.00> Fixed Enclosure Services SCSI-5 device 
> ses0: 300.000MB/s transfers
> ses0: SCSI-3 SES Device
> SMP: AP CPU #1 Launched!
> da0 at mpt0 bus 0 target 0 lun 0
> da0: <FUJITSU MAX3036RC D206> Fixed Direct Access SCSI-3 device 
> da0: 300.000MB/s transfers, Tagged Queueing Enabled
> da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
> Trying to mount root from ufs:/dev/da0s1a
> mfi0: 72 - Battery temperature is normal
> mfi0: 73 - Battery started charging
> mfi0: 74 - Current capacity of the battery is above threshold
> bce0: link state changed to DOWN
> bce0: link state changed to UP
> ------------------------------------------------------------------------
>
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45266948.3070407>