From owner-freebsd-scsi Sun Nov 3 10:23:30 1996 Return-Path: owner-freebsd-scsi Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id KAA13697 for freebsd-scsi-outgoing; Sun, 3 Nov 1996 10:23:30 -0800 (PST) Received: from In-Net.inba.fr (root@arthur.inba.fr [194.51.120.34]) by freefall.freebsd.org (8.7.5/8.7.3) with SMTP id KAA13688 for ; Sun, 3 Nov 1996 10:23:26 -0800 (PST) Received: from uther.inba.fr (uther.inba.fr [194.51.120.62]) by In-Net.inba.fr (8.6.12/8.6.9) with SMTP id TAA13495 for ; Sun, 3 Nov 1996 19:23:22 +0100 Message-Id: <1.5.4.16.19961103182934.2417b6a0@mail.inba.fr> X-Sender: psc@mail.inba.fr X-Mailer: Windows Eudora Light Version 1.5.4 (16) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Sun, 03 Nov 1996 19:29:34 +0100 To: freebsd-scsi@FreeBSD.ORG From: Philippe SCHACK Subject: Micronics MotherBoard Sender: owner-freebsd-scsi@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hello, I have installed FreeBSD with a P75 on a Micronics D5CUB PCI/ISA card and have the following problems: I have installed a Adaptec SCSI AHA-1542B card with a TANDBERG TDC-3800 Streamer . When i boot on the BOOT FLOPPY, the system hangs after displaying a part of the Tandberg TDC 3800 informations. If I disconnect the streamer to install FreeBSD, all is OK. But when i want to use it with a kernel wich use the adaptec card, I have the same problem. I have modified the SCSI_DELAY to 30 => same problem I have used the TUNE_1542 option => same problem Does anyone have any information to help me please ? The same material (Adaptec card floppy) on a 486 DLC card works fine. Thank's P.SCHACK