Date: Fri, 23 Apr 2010 23:27:32 -0700 From: Garrett Cooper <yanefbsd@gmail.com> To: Brandon Gooch <jamesbrandongooch@gmail.com> Cc: =?ISO-8859-1?Q?Olivier_Cochard=2DLabb=E9?= <olivier@cochard.me>, Bernhard Schmidt <bschmidt@techwires.net>, freebsd-stable@freebsd.org Subject: Re: iwn firmware instability with an up-to-date stable kernel Message-ID: <l2z7d6fde3d1004232327heb8a744alfa02b81f199876ff@mail.gmail.com> In-Reply-To: <i2h179b97fb1004232208za4b1dbbekef363ec0fa522e0@mail.gmail.com> References: <w2s3131aa531004171849i12348bdbt12dfbb18c1f71bc2@mail.gmail.com> <20100418081400.GA40496@mx.techwires.net> <r2q3131aa531004180456w49eea301t526d305c8e7a980a@mail.gmail.com> <v2w7d6fde3d1004231929yb5b54ac6rc3a90276014176b0@mail.gmail.com> <r2u7d6fde3d1004231932rea2235a1r2dcd8f1973fcb1b4@mail.gmail.com> <s2m179b97fb1004232005geee6fbb6q9776a119f5b477db@mail.gmail.com> <u2v7d6fde3d1004232142yb2037851ne906f38ccc8039e9@mail.gmail.com> <y2p7d6fde3d1004232159hcc0c02bcpb6ee0910d76672a7@mail.gmail.com> <i2h179b97fb1004232208za4b1dbbekef363ec0fa522e0@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Apr 23, 2010 at 10:08 PM, Brandon Gooch <jamesbrandongooch@gmail.com> wrote: > On Sat, Apr 24, 2010 at 4:59 AM, Garrett Cooper <yanefbsd@gmail.com> wrot= e: >> On Fri, Apr 23, 2010 at 9:42 PM, Garrett Cooper <yanefbsd@gmail.com> wro= te: >>> On Fri, Apr 23, 2010 at 8:05 PM, Brandon Gooch >>> <jamesbrandongooch@gmail.com> wrote: >>>> 2010/4/23 Garrett Cooper <yanefbsd@gmail.com>: >>>>> 2010/4/23 Garrett Cooper <yanefbsd@gmail.com>: >>>>>> 2010/4/18 Olivier Cochard-Labb=E9 <olivier@cochard.me>: >>>>>>> 2010/4/18 Bernhard Schmidt <bschmidt@techwires.net>: >>>>>>>> Are you able to reproduce this on demand? As in type a few command= s and >>>>>>>> the firmware error occurs? >>>>>>>> >>>>>>> >>>>>>> No, I'm not able to reproduce on demand this problem. >>>>>> >>>>>> I'm seeing similar issues on occasion with my Lenovo as well: >>>>>> >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: firmware error log: >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: error type =A0 =A0 =A0=3D >>>>>> "NMI_INTERRUPT_WDG" (0x00000004) >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: program counter =3D 0x0000046C >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: source line =A0 =A0 =3D 0x0000= 00D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: error data =A0 =A0 =A0=3D 0x00= 00000207030000 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: branch link =A0 =A0 =3D 0x0000= 8370000004C2 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: interrupt link =A0=3D 0x000006= DA000018B8 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: time =A0 =A0 =A0 =A0 =A0 =A0= =3D 4287402440 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: driver status: >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring =A00: qid=3D0 =A0cur= =3D1 =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring =A01: qid=3D1 =A0cur= =3D0 =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring =A02: qid=3D2 =A0cur= =3D0 =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring =A03: qid=3D3 =A0cur= =3D36 =A0queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring =A04: qid=3D4 =A0cur= =3D123 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring =A05: qid=3D5 =A0cur= =3D0 =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring =A06: qid=3D6 =A0cur= =3D0 =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring =A07: qid=3D7 =A0cur= =3D0 =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring =A08: qid=3D8 =A0cur= =3D0 =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring =A09: qid=3D9 =A0cur= =3D0 =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 10: qid=3D10 cur=3D0 = =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 11: qid=3D11 cur=3D0 = =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 12: qid=3D12 cur=3D0 = =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 13: qid=3D13 cur=3D0 = =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 14: qid=3D14 cur=3D0 = =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: tx ring 15: qid=3D15 cur=3D0 = =A0 queued=3D0 >>>>>> Apr 23 19:25:24 garrcoop-fbsd kernel: rx ring: cur=3D8 >>>>>> >>>>>> This may be because the system was under load (I was installing a po= rt >>>>>> shortly before the connection dropped). I'll try poking at this >>>>>> further because it's going to be an annoying productivity loss :/. >>>>> >>>>> =A0 =A0Sorry... should have included more helpful details. >>>>> Thanks, >>>>> -Garrett >>>>> >>>>> dmesg: >>>>> >>>>> iwn0: <Intel(R) PRO/Wireless 4965BGN> mem 0xdf2fe000-0xdf2fffff irq 1= 7 >>>>> at device 0.0 on pci3 >>>>> iwn0: MIMO 2T3R, MoW1, address 00:1d:e0:7d:9f:c7 >>>>> iwn0: [ITHREAD] >>>>> iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbp= s >>>>> iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps >>>>> iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps >>>>> 24Mbps 36Mbps 48Mbps 54Mbps >>>>> >>>>> pciconf -lv snippet: >>>>> >>>>> iwn0@pci0:3:0:0: =A0 =A0 =A0 =A0class=3D0x028000 card=3D0x11108086 ch= ip=3D0x42308086 >>>>> rev=3D0x61 hdr=3D0x00 >>>>> =A0 =A0vendor =A0 =A0 =3D 'Intel Corporation' >>>>> =A0 =A0device =A0 =A0 =3D 'Intel Wireless WiFi Link 4965AGN (Intel 49= 65AGN)' >>>>> =A0 =A0class =A0 =A0 =A0=3D network >>>>> cbb0@pci0:21:0:0: =A0 =A0 =A0 class=3D0x060700 card=3D0x20c617aa chip= =3D0x04761180 >>>>> rev=3D0xba hdr=3D0x02 >>>>> >>>>> uname -a: >>>>> >>>>> $ uname -a >>>>> FreeBSD garrcoop-fbsd.cisco.com 8.0-STABLE FreeBSD 8.0-STABLE #0 >>>>> r207006: Wed Apr 21 13:18:44 PDT 2010 >>>>> root@garrcoop-fbsd.cisco.com:/usr/obj/usr/src/sys/LAPPY_X86 =A0i386 >>>> >>>> I'm actually looking at this right now. For me, it's actually >>>> happening when my machine stays on overnight (or for long periods of >>>> time, idle). >>>> >>>> Also, it seems to be causing the kernel to panic, although I'm now >>>> wondering if the Machine Check Architecture is somehow catching this >>>> device error and causing an exception (hw.mca.enabled=3D1)(?) -- not >>>> possible, right ??? >>>> >>>> Whatever the case, I can't seem to get the firmware error to occur >>>> with iwn(4) debugging or wlandebug options enabled, so who knows >>>> exactly what leads to this. >>>> >>>> I know Bernhard has worked hard on this driver, it's a shame that this >>>> freaky bug has bit us all now, without leaving many clues :( >>>> >>>> I've attached a textdump for posterity if nothing else :) >>> >>> =A0 =A0Connectivity appears to be shoddy in my neck of the woods (kind = of >>> ironic... but meh). Just running buildworld, buildkernel, then doing a >>> tcpdump in parallel causes the pseudo device to go up and down a lot. >>> I assume this isn't standard behavior? >>> =A0 =A0Just for reference buildworld was started shortly after 19:39:05= , >>> and it finished at 21:29. The interface has also gone up and down once >>> since then while the system's been basically idle. >> >> =A0 =A0Hmmm... I'm seem to be in an excellent position to reproduce this >> issue. I've reproduced it twice by merely bringing the interface up >> and down several times using: >> >> ifconfig_wlan0=3D"WPA DHCP" >> >> =A0 =A0instead of my usual: >> >> ifconfig_wlan0=3D"WPA ssid <base-station-id1> DHCP" >> >> =A0 =A0Maybe others who are experiencing the issue should try that? I'll >> do more testing when I get home... > > My rc.conf is: > > ifconfig_wlan0=3D"WPA DHCP" > > ...as well, although I haven't tried manually taking the interface > down and bringing it back up. Hmmm... that is interesting. I wish I could do that, but it seems to be alluding my grasp right now. The driver just kind of freaks out with a bunch of SSIDs, one being my target SSID, a bunch of NUL string ones, and then finally it just croaks. I need to figure out whether or not the SSIDs are valid when I boot it up at my desk again. > Are you waiting for the device to associate and begin passing traffic > before you each up/down cycle? I was, but I'm not sure whether or not the Ajax pieces in GMail were. I'll try some more rudimentary tests when I get back to work on Monday in that environment, but I need to try out other things at home as well in the meantime. Thanks, -Garrett
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?l2z7d6fde3d1004232327heb8a744alfa02b81f199876ff>