Date: Sun, 8 Oct 2006 13:27:04 +1300 From: "Juha Saarinen" <juhasaarinen@gmail.com> To: "FreeBSD questions" <freebsd-questions@freebsd.org> Subject: Sundry hardware issues on an Alderwood/Intel 925 Express board + 6.1-RELEASE Message-ID: <b34be8420610071727v1c6cd5c7s98b816e634f8a879@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
>From dmesg on a freshly installed 6.1-RELEASE system: acpi0: <IntelR AWRDACPI> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <multimedia> at device 27.0 (no driver attached) pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pciconf -lv: none0@pci0:27:0: class=0x040300 card=0x266817f2 chip=0x26688086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW Intel High DefiNition Audio Controller' class = multimedia none1@pci0:31:3: class=0x0c0500 card=0x266a17f2 chip=0x266a8086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FB/FR/FW/FRW SMBus Controller' class = serial bus subclass = SMBus none2@pci1:0:0: class=0x030000 card=0x31251458 chip=0x014010de rev=0xa2 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'GeForce 6600 GT' class = display subclass = VGA Is it possible to get these going? Then there's this message: acpi_tz0: failed to set new freq, disabling passive cooling Is this: http://www.bsdforums.org/forums/archive/index.php/t-38587.html a valid workaround? This looks a bit more worrisome: atapci1: <Intel ICH6 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfb00-0xfb0f at device 31.2 on pci0 atapci1: failed to enable memory mapping! Related to this? http://www.freebsd.org/cgi/query-pr.cgi?pr=92238 Anything I could do about it? -- Juha
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b34be8420610071727v1c6cd5c7s98b816e634f8a879>