Date: Tue, 7 Jun 2016 15:19:25 -0500 From: list-news <list-news@mindpackstudios.com> To: freebsd-scsi@freebsd.org Subject: Re: Avago LSI SAS 3008 & Intel SSD Timeouts Message-ID: <d8c3284c-97aa-7ae0-48e2-2d6b3e5dcf39@mindpackstudios.com> In-Reply-To: <331da785-c88b-d74e-512a-37bdb618d512@multiplay.co.uk> References: <30c04d8b-80cb-c637-26dc-97caebad3acb@mindpackstudios.com> <b30f968c-cc41-f7de-5a54-35bed961e65a@multiplay.co.uk> <08C01646-9AF3-4E89-A545-C051A284E039@sarenet.es> <986e03a7-5dc8-f5e0-5a17-4bf49459f905@mindpackstudios.com> <2823D96D-881D-4D40-B610-FC8292FA2FC5@sarenet.es> <4072b65d-25d4-2a79-5911-573517b0ee57@mindpackstudios.com> <583dddc6-4614-9900-88f7-27347866d7aa@mindpackstudios.com> <331da785-c88b-d74e-512a-37bdb618d512@multiplay.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Sure Steve: # cat /boot/loader.conf | grep trim vfs.zfs.trim.enabled=0 # sysctl vfs.zfs.trim.enabled vfs.zfs.trim.enabled: 0 # uptime 3:14PM up 11 mins, 3 users, load averages: 6.58, 11.31, 7.07 # tail -f /var/log/messages: Jun 7 15:13:50 s18 kernel: (da6:mpr0:0:16:0): WRITE(10). CDB: 2a 00 2b d8 86 50 00 00 b0 00 length 90112 SMID 1016 command timeout cm 0xfffffe0001375580 ccb 0xfffff8039895f800 target 16, handle(0x0010) Jun 7 15:13:50 s18 kernel: mpr0: At enclosure level 0, slot 8, connector name ( ) Jun 7 15:13:50 s18 kernel: mpr0: timedout cm 0xfffffe0001375580 allocated tm 0xfffffe0001322150 Jun 7 15:13:50 s18 kernel: (noperiph:mpr0:0:4294967295:0): SMID 1 Aborting command 0xfffffe0001375580 Jun 7 15:13:50 s18 kernel: mpr0: Sending reset from mprsas_send_abort for target ID 16 Jun 7 15:13:50 s18 kernel: (da6:mpr0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 786 command timeout cm 0xfffffe00013627a0 ccb 0xfffff8039851e800 target 16, handle(0x0010) Jun 7 15:13:50 s18 kernel: mpr0: At enclosure level 0, slot 8, connector name ( ) Jun 7 15:13:50 s18 kernel: mpr0: queued timedout cm 0xfffffe00013627a0 for processing by tm 0xfffffe0001322150 Jun 7 15:13:50 s18 kernel: mpr0: EventReply : Jun 7 15:13:50 s18 kernel: EventDataLength: 2 Jun 7 15:13:50 s18 kernel: AckRequired: 0 Jun 7 15:13:50 s18 kernel: Event: SasDiscovery (0x16) Jun 7 15:13:50 s18 kernel: EventContext: 0x0 Jun 7 15:13:50 s18 kernel: Flags: 1<InProgress> Jun 7 15:13:50 s18 kernel: ReasonCode: Discovery Started Jun 7 15:13:50 s18 kernel: PhysicalPort: 0 Jun 7 15:13:50 s18 kernel: DiscoveryStatus: 0 Jun 7 15:13:50 s18 kernel: (da6:mpr0:0:16:0): READ(10). CDB: 28 00 0b 43 a8 00 00 00 10 00 length 8192 SMID 624 completed cm 0xfffffe0001355300 ccb 0xfffff803984d4800 during recovery ioc 804b scsi 0 state c xfer 0 Jun 7 15:13:50 s18 kernel: (da6:mpr0:0:16:0): READ(10). CDB: 28 00 0b 43 a8 00 00 00 10 00 length 8192 SMID 624 terminated ioc 804b scsi 0 state c xfer 0 Jun 7 15:13:50 s18 kernel: (da6:mpr0:0:16:0): READ(10). CDB: 28 00 0b 43 a7 f0 00 00 10 00 length 8192 SMID 633 completed cm 0xfffffe0001355ed0 ccb 0xfffff803987f0000 during recovery ioc 804b scsi 0 state c xfer 0 Jun 7 15:13:50 s18 kernel: (da6:mpr0:0:16:0): READ(10). CDB: 28 00 0b 43 a7 f0 00 00 10 00 length 8192 SMID 633 terminated ioc 804b scsi 0 state c xfer 0 Jun 7 15:13:50 s18 kernel: (da6:mpr0:0:16:0): READ(10). CDB: 28 00 0a 25 3f f0 00 00 08 00 length 4096 SMID 133 completed cm 0xfffffe000132ce90 ccb 0xfffff803985fc000 during recovery ioc 804b scsi 0 state c xfer 0 Jun 7 15:13:50 s18 kernel: (da6:mpr0:0:16:0): READ(10). CDB: 28 00 0a 25 3f f0 00 00 08 00 length 4096 SMID 133 terminated ioc 804b scsi 0 state c xfer 0 Jun 7 15:13:50 s18 kernel: (da6:mpr0:0:16:0): WRITE(10). CDB: 2a 00 2b d8 86 50 00 00 b0 00 length 90112 SMID 1016 completed timedout cm 0xfffffe0001375580 ccb 0xfffff8039895f800 during recovery ioc 8048 scsi 0 state c (da6:mpr0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 786 completed timedout cm 0xfffffe(da6:mpr0:0:16:0): WRITE(10). CDB: 2a 00 2b d8 86 50 00 00 b0 00 Jun 7 15:13:50 s18 kernel: 00013627a0 ccb 0xfffff8039851e800 during recovery ioc 804b scsi 0 (da6:mpr0:0:16:0): CAM status: Command timeout Jun 7 15:13:50 s18 kernel: (da6:mpr0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 786 terminated ioc 804b scsi 0 sta(da6:te c xfer 0 Jun 7 15:13:50 s18 kernel: mpr0:0: (xpt0:mpr0:0:16:0): SMID 1 abort TaskMID 1016 status 0x0 code 0x0 count 5 Jun 7 15:13:50 s18 kernel: 16: (xpt0:mpr0:0:16:0): SMID 1 finished recovery after aborting TaskMID 1016 Jun 7 15:13:50 s18 kernel: 0): mpr0: Retrying command Jun 7 15:13:50 s18 kernel: Unfreezing devq for target ID 16 Jun 7 15:13:50 s18 kernel: mpr0: EventReply : Jun 7 15:13:50 s18 kernel: EventDataLength: 4 Jun 7 15:13:50 s18 kernel: AckRequired: 0 Jun 7 15:13:50 s18 kernel: Event: SasTopologyChangeList (0x1c) Jun 7 15:13:50 s18 kernel: EventContext: 0x0 Jun 7 15:13:50 s18 kernel: EnclosureHandle: 0x2 Jun 7 15:13:50 s18 kernel: ExpanderDevHandle: 0x9 Jun 7 15:13:50 s18 kernel: NumPhys: 31 Jun 7 15:13:50 s18 kernel: NumEntries: 1 Jun 7 15:13:50 s18 kernel: StartPhyNum: 8 Jun 7 15:13:50 s18 kernel: ExpStatus: Responding (0x3) Jun 7 15:13:50 s18 kernel: PhysicalPort: 0 Jun 7 15:13:50 s18 kernel: PHY[8].AttachedDevHandle: 0x0010 Jun 7 15:13:50 s18 kernel: PHY[8].LinkRate: 12.0Gbps (0xbb) Jun 7 15:13:50 s18 kernel: PHY[8].PhyStatus: PHYLinkStatusChange Jun 7 15:13:50 s18 kernel: mpr0: (0)->(mprsas_fw_work) Working on Event: [16] Jun 7 15:13:50 s18 kernel: mpr0: (1)->(mprsas_fw_work) Event Free: [16] Jun 7 15:13:50 s18 kernel: mpr0: (1)->(mprsas_fw_work) Working on Event: [1c] Jun 7 15:13:50 s18 kernel: mpr0: (2)->(mprsas_fw_work) Event Free: [1c] Jun 7 15:13:50 s18 kernel: mpr0: EventReply : Jun 7 15:13:50 s18 kernel: EventDataLength: 2 Jun 7 15:13:50 s18 kernel: AckRequired: 0 Jun 7 15:13:50 s18 kernel: Event: SasDiscovery (0x16) Jun 7 15:13:50 s18 kernel: EventContext: 0x0 Jun 7 15:13:50 s18 kernel: Flags: 0 Jun 7 15:13:50 s18 kernel: ReasonCode: Discovery Complete Jun 7 15:13:50 s18 kernel: PhysicalPort: 0 Jun 7 15:13:50 s18 kernel: DiscoveryStatus: 0 Jun 7 15:13:50 s18 kernel: mpr0: (2)->(mprsas_fw_work) Working on Event: [16] Jun 7 15:13:50 s18 kernel: mpr0: (3)->(mprsas_fw_work) Event Free: [16] Jun 7 15:13:51 s18 kernel: (da6:mpr0:0:16:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 Jun 7 15:13:51 s18 kernel: (da6:mpr0:0:16:0): CAM status: SCSI Status Error Jun 7 15:13:51 s18 kernel: (da6:mpr0:0:16:0): SCSI status: Check Condition Jun 7 15:13:51 s18 kernel: (da6:mpr0:0:16:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jun 7 15:13:51 s18 kernel: (da6:mpr0:0:16:0): Retrying command (per sense data) -Kyle On 6/7/16 2:53 PM, Steven Hartland wrote: > CDB: 85 is a TRIM command IIRC, I know you tried it before using BIO > delete but assuming your running ZFS can you set the following in > loader.conf and see how you get on. > vfs.zfs.trim.enabled=0 > > Regards > Steve
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d8c3284c-97aa-7ae0-48e2-2d6b3e5dcf39>