From owner-freebsd-multimedia Tue Aug 12 08:22:39 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id IAA28075 for multimedia-outgoing; Tue, 12 Aug 1997 08:22:39 -0700 (PDT) Received: from pluto.plutotech.com (ken@mail.plutotech.com [206.168.67.137]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id IAA28070 for ; Tue, 12 Aug 1997 08:22:35 -0700 (PDT) Received: (from ken@localhost) by pluto.plutotech.com (8.8.5/8.8.5) id JAA16365; Tue, 12 Aug 1997 09:22:29 -0600 (MDT) From: Kenneth Merry Message-Id: <199708121522.JAA16365@pluto.plutotech.com> Subject: Re: Just noticed this In-Reply-To: from Kyle Mestery at "Aug 12, 97 08:03:41 am" To: mestery@winternet.com (Kyle Mestery) Date: Tue, 12 Aug 1997 09:22:29 -0600 (MDT) Cc: freebsd-multimedia@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL28s (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Kyle Mestery wrote... > > I have finally gotten all the software compiled and ready for my > Wincast/TV card to work. I installed it last nite and booted up, no > problem, the kernel found it, but here is what the dmesg output says about > it: > > bktr0: rev 0x11 int a irq 18 on pci0.18.0 > Hauppauge WinCast/TV, Temic PAL tuner. > ^^^ > > Should that really be a PAL tuner? I guess I don't know if that is right > or not, and the PAL/ntsc difference might not affect tuners, but it is > just a thought. Anyways, I can't get any reception on the TV. Before I > do anything though, I am going to check my cable hookup one more time in > my apartment. I do have an antennae I am going to try and use also. I > will report back. One more thing Amancio, I just compiled a kernel > without BROKEN_SB defined. I am at work now, but will report back either > tonite or tomorrow morning as to how that works. Thanks! Amancio has sent out a couple of pieces of mail on -current about the bt848 driver being broken. I tried mine out Sunday night for the first time in a couple of months, and it didn't work. No picture, nothing. So I think something is wrong with the driver. Has anyone out there had any success with the bt848 driver and -current? Ken -- Kenneth Merry ken@plutotech.com