Date: Tue, 27 Feb 2001 01:54:05 -0800 (PST) From: Christopher Johnson <cjohnson@wcug.wwu.edu> To: freebsd-questions@freebsd.org Subject: lnc and Cabletron E22xx Message-ID: <Pine.BSO.4.21.0102262348540.19268-100000@sloth.wcug.wwu.edu>
next in thread | raw e-mail | index | archive | help
I have a Cabletron E22xx ISA 10-BaseT NIC, and I'm having a bit of trouble
getting it to work. I suspect it may not be supported (it's not mentioned
in lnc(4)), but it's mentioned in the driver source code as an AMD
PCnet-II. The card has an AMD 79C961AKC chip on it. I'd be willing to
write a driver for it, if I could get help writing the driver.
I'm running FreeBSD 4.2-STABLE (stable as of Saturday, Feb. 24th).
Here's what I have in the config file:
device lnc0 at isa? port 0x300 irq 5 drq 7
On bootup, the card reports that it's using IRQ 5 and DMA 7.
Here's the pnpinfo:
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID CSI2203 (0x0322690e), Serial Number 0x1d17be3e
PnP Version 1.0, Vendor Version 0
Device Description: Cabletron E22xx Adapter
Logical Device ID: CSI2203 0x0322690e #0
Device powers up active
Device supports I/O Range Check
TAG Start DF
DMA: channel(s) 3
8/16-bit, bus master, , , Compatibility mode
IRQ: 10 IRQ: High true edge sensitive
I/O Range 0x300 .. 0x300, alignment 0x20, len 0x18
[16-bit addr]
TAG Start DF
DMA: channel(s) 3 5 6 7
8/16-bit, bus master, , , Compatibility mode
IRQ: 3 4 5 9 10 11 12 15 IRQ: High true edge sensitive
I/O Range 0x200 .. 0x3e0, alignment 0x20, len 0x18
[16-bit addr]
TAG End DF
End Tag
Successfully got 12 resources, 1 logical fdevs
-- card select # 0x0001
CSN CSI2203 (0x0322690e), Serial Number 0x1d17be3e
Logical device #0
IO: 0x0300 0x0300 0x0300 0x0300 0x0300 0x0300 0x0300 0x0300
IRQ 10 0
DMA 3 4
IO range check 0x00 activate 0x01
And the dmesg:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #3: Wed Feb 28 00:10:08 PST 2001
root@das_bitch:/usr/src/sys/compile/DAS_BITCH
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 501139012 Hz
CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 201261056 (196544K bytes)
avail memory = 192671744 (188156K bytes)
Preloaded elf kernel "kernel" at 0xc0322000.
K6-family MTRR support enabled (2 registers)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 7.2 irq 10
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xdf000000-0xdf00007f irq 11 at device 8.0 on pci0
xl0: Ethernet address: 00:10:4b:7a:d8:20
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xdc00-0xdc1f irq 9 at device 10.0 on pci0
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19623MB <IBM-DTLA-307020> [39870/16/63] at ata0-master UDMA33
acd0: CD-RW <SAMSUNG CD-R/RW SW-408B> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s2a
Any help would be appreciated.
Chris Johnson
cjohnson@wcug.wwu.edu
The fifth dentist recommends WCUG.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSO.4.21.0102262348540.19268-100000>