Date: Tue, 11 Dec 2007 08:34:24 +0100 From: Gerhard Schmidt <estartu@ze.tum.de> To: freebsd-acpi@freebsd.org Subject: device_attach: est0 attach returned 6 Message-ID: <475E3D80.4090002@ze.tum.de>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------020705070707050507090303
Content-Type: text/plain; charset=ISO-8859-15
Content-Transfer-Encoding: 8bit
I'm Just building a new Workstation for me.
It has a Asus P5M2 Main board and an Intel Core2Quad CPU.
Booting FreeBSD 7.0-Beta4 I get the following message
device_attach: est0 attach returned 6
and powerd is not working properly
[root@etustar2 ~]# powerd -v
powerd: unable to determine AC line status
idle time > 90%, decreasing clock speed from 2388 MHz to 2089 MHz
powerd: error setting CPU frequency 2089: Invalid argument
idle time > 90%, decreasing clock speed from 2089 MHz to 1791 MHz
powerd: error setting CPU frequency 1791: Invalid argument
idle time > 90%, decreasing clock speed from 1791 MHz to 1492 MHz
powerd: error setting CPU frequency 1492: Invalid argument
idle time > 90%, decreasing clock speed from 1492 MHz to 1194 MHz
powerd: error setting CPU frequency 1194: Invalid argument
idle time > 90%, decreasing clock speed from 1194 MHz to 895 MHz
powerd: error setting CPU frequency 895: Invalid argument
idle time > 90%, decreasing clock speed from 895 MHz to 597 MHz
powerd: error setting CPU frequency 597: Invalid argument
idle time > 90%, decreasing clock speed from 597 MHz to 298 MHz
powerd: error setting CPU frequency 298: Invalid argument
idle time < 65%, increasing clock speed from 298 MHz to 895 MHz
powerd: error setting CPU frequency 895: Invalid argument
idle time < 65%, increasing clock speed from 895 MHz to 1492 MHz
powerd: error setting CPU frequency 1492: Invalid argument
idle time < 65%, increasing clock speed from 1492 MHz to 2089 MHz
powerd: error setting CPU frequency 2089: Invalid argument
idle time < 65%, increasing clock speed from 2089 MHz to 2388 MHz
powerd: error setting CPU frequency 2388: Invalid argument
Any ideas how to fix this.
I have the complete dmesg output attached.
Greetings
Estartu
--
-------------------------------------------------
Gerhard Schmidt | E-Mail: schmidt@ze.tum.de
TU-München |
WWW & Online Services |
Tel: 089/289-25270 |
Fax: 089/289-25257 | PGP-Publickey auf Anfrage
--------------020705070707050507090303
Content-Type: text/plain;
name="dmesg.boot"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.boot"
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA4 #1: Mon Dec 10 12:39:36 CET 2007
root@etustar2.ze.tum.de:/usr/src/sys/amd64/compile/ETUSTAR
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (2400.10-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
usable memory = 4286242816 (4087 MB)
avail memory = 4085571584 (3896 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [SSDT] - 9F, should be A6 [20070320]
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - A0, should be 9B [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 922092206000922
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 922092206000922
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 922092206000922
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [SSDT] - 2F, should be 40 [20070320]
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 922092206000922
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
fwohci0: <NEC uPD72874> mem 0xfe8ff000-0xfe8fffff irq 28 at device 2.0 on pci3
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:4c:01:00:00:40:71
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:4c:00:40:71
fwe0: Ethernet address: 02:00:4c:00:40:71
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:4c:01:00:00:40:71 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7fb1c000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4201> mem 0xfe9f0000-0xfe9fffff irq 16 at device 0.0 on pci4
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:1e:8c:01:8d:d8
bge0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4201> mem 0xfeaf0000-0xfeafffff irq 17 at device 0.0 on pci5
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: Ethernet address: 00:1e:8c:01:8d:74
bge1: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xec00-0xec1f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe880-0xe89f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel AHCI controller> port 0xe800-0xe807,0xe480-0xe483,0xe400-0xe407,0xe080-0xe083,0xe000-0xe00f mem 0xfebff800-0xfebffbff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcf7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model 4D+ Mouse, device ID 8
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: <vendor 0x046a product 0x0021, class 0/0, rev 2.00/0.20, addr 2> on uhub0
kbd2 at ukbd0
uhid0: <vendor 0x046a product 0x0021, class 0/0, rev 2.00/0.20, addr 2> on uhub0
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad4: 476940MB <Seagate ST3500630NS 3.AEK> at ata2-master SATA300
acd0: DVDR <HL-DT-ST DVDRAM GSA-H66N/CB00> at ata3-master SATA150
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
cd0 at ata3 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-H66N CB00> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
--------------020705070707050507090303--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?475E3D80.4090002>