Date: Fri, 11 May 2001 08:22:16 -0700 From: Curtis King <curtis.king@messagingdirect.com> To: George Reid <greid@FreeBSD.ORG> Cc: stable@FreeBSD.ORG Subject: Re: Sound (PCM) in 4.3 Message-ID: <EXECMAIL.10105110816.E312@renoir.artattack.orthanc.ab.ca> In-Reply-To: <Pine.BSF.4.21.0105110158390.13949-100000@sobek.openirc.co.uk> References: <Pine.BSF.4.21.0105110158390.13949-100000@sobek.openirc.co.uk> <3AFB1BF2.2080605@bellsouth.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--Part10105110822.D312
Content-Type: Text/Plain; charset="us-ascii"
On Fri, 11 May 2001 02:00:12 +0100 (BST) George Reid <greid@FreeBSD.ORG>
wrote:
> Some error messages (boot -v dmesg, pciconf -l etc) would help.
Here is some more information as my SB Live doesn't work either.
thanks,
ck
-------------------
ACI Worldwide
Phone: 403-670-8838
Email: Curtis.King@MessagingDirect.com
Curtis King
--Part10105110822.D312
Content-Type: Text/plain; charset="us-ascii"; name="pci_info.txt"
Content-Disposition: attachment; filename="pci_info.txt"
chip0@pci0:0:0: class=0x060000 card=0x80421043 chip=0x03051106 rev=0x03 hdr=0x00
pcib2@pci0:1:0: class=0x060400 card=0x00000080 chip=0x83051106 rev=0x00 hdr=0x01
isab0@pci0:4:0: class=0x060100 card=0x80421043 chip=0x06861106 rev=0x40 hdr=0x00
atapci0@pci0:4:1: class=0x01018a card=0x00000000 chip=0x05711106 rev=0x06 hdr=0x00
none0@pci0:4:3: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x16 hdr=0x00
chip1@pci0:4:4: class=0x060000 card=0x80421043 chip=0x30571106 rev=0x40 hdr=0x00
fxp0@pci0:9:0: class=0x020000 card=0x000c8086 chip=0x12298086 rev=0x08 hdr=0x00
none1@pci0:10:0: class=0x040100 card=0x80271102 chip=0x00021102 rev=0x08 hdr=0x00
emujoy0@pci0:10:1: class=0x098000 card=0x00201102 chip=0x70021102 rev=0x08 hdr=0x00
none2@pci0:11:0: class=0x030000 card=0x00301681 chip=0x011010de rev=0xa1 hdr=0x00
atapci1@pci0:17:0: class=0x018000 card=0x4d33105a chip=0x0d30105a rev=0x02 hdr=0x00
none3@pci1:0:0: class=0x030000 card=0x00000000 chip=0x002d10de rev=0x15 hdr=0x00
--Part10105110822.D312
Content-Type: Text/plain; charset="us-ascii"; name="boot_output.txt"
Content-Disposition: attachment; filename="boot_output.txt"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #1: Tue May 1 16:06:23 MDT 2001
root@renoir.artattack.orthanc.ab.ca:/usr/src/sys/compile/RENOIR
Calibrating clock(s) ... TSC clock: 908070758 Hz, i8254 clock: 1193162 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) Processor (908.09-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 268353536 (262064K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00385000 - 0x0ffe3fff, 264630272 bytes (64607 pages)
avail memory = 257880064 (251836K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f92a0
bios32: Entry = 0xf0f50 (c00f0f50) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x1150
pnpbios: Found PnP BIOS data at 0xc00fc2b0
pnpbios: Entry = f0000:c2e0 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 000f67c0
Preloaded elf kernel "kernel" at 0xc035f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106)
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1106, dev=0x0305, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base e4000000, size 26
found-> vendor=0x1106, dev=0x8305, revid=0x00
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1106, dev=0x0686, revid=0x40
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1106, dev=0x0571, revid=0x06
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000d800, size 4
found-> vendor=0x1106, dev=0x3038, revid=0x16
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[20]: type 1, range 32, base 0000d000, size 5
found-> vendor=0x1106, dev=0x3057, revid=0x40
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base d5800000, size 12
map[14]: type 1, range 32, base 0000a400, size 6
map[18]: type 1, range 32, base d5000000, size 20
found-> vendor=0x1102, dev=0x0002, revid=0x08
class=04-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=255
found-> vendor=0x1102, dev=0x7002, revid=0x08
class=09-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x10de, dev=0x0110, revid=0xa1
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base d4000000, size 24
map[14]: type 1, range 32, base d8000000, size 27
found-> vendor=0x105a, dev=0x0d30, revid=0x02
class=01-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 00009400, size 3
map[14]: type 1, range 32, base 00009000, size 2
map[18]: type 1, range 32, base 00008800, size 3
map[1c]: type 1, range 32, base 00008400, size 2
map[20]: type 1, range 32, base 00008000, size 6
map[24]: type 1, range 32, base d3800000, size 17
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
found-> vendor=0x10de, dev=0x002d, revid=0x15
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> (vendor=0x10de, dev=0x002d) at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808
ata1: mask=03 status0=50 status1=50
ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=14 b=eb
ata1: mask=03 status0=00 status1=10
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> (vendor=0x1106, dev=0x3038) at 4.3 irq 9
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa400-0xa43f mem 0xd5000000-0xd50fffff,0xd5800000-0xd5800fff irq 9 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:b7:b0:28:53
pcm0: <Creative EMU10K1> at device 10.0 on pci0
pcm0: unable to map register space
device_probe_and_attach: pcm0 attach returned 6
pci0: <NVidia model 0110 graphics accelerator> (vendor=0x10de, dev=0x0110) at 11.0 irq 10
atapci1: <Promise ATA100 controller> port 0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 mem 0xd3800000-0xd381ffff irq 10 at device 17.0 on pci0
ata-: ata2 exists, using next available unit number
ata2: iobase=0x9400 altiobase=0x9002 bmaddr=0x8000
ata2: mask=03 status0=3c status1=3c
ata2: mask=03 ostat0=3c ostat2=3c
ata2-master: ATAPI probe a=3c b=3c
ata2-slave: ATAPI probe a=3c b=3c
ata2: mask=03 status0=3c status1=3c
ata2-master: ATA probe a=25 b=25
ata2-slave: ATA probe a=25 b=25
ata2: devices=00
ata2: at 0x9400 on atapci1
ata3: iobase=0x8800 altiobase=0x8402 bmaddr=0x8008
ata3: mask=03 status0=3c status1=3c
ata3: mask=03 ostat0=3c ostat2=3c
ata3-master: ATAPI probe a=3c b=3c
ata3-slave: ATAPI probe a=3c b=3c
ata3: mask=03 status0=3c status1=3c
ata3-master: ATA probe a=25 b=25
ata3-slave: ATA probe a=25 b=25
ata3: devices=00
ata3: at 0x8800 on atapci1
using shared irq10.
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03051106)
pci-: pci1 exists, using next available unit number
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata4 failed to probe at port 0x1f0 irq 14 on isa0
ata5 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
Linux-ELF exec handler installed
ata0-master: success setting UDMA5 on VIA chip
Creating DISK ad0
Creating DISK wd0
ad0: <IBM-DTLA-307030/TX4OA50C> ATA-5 disk at ata0-master
ad0: 29314MB (60036480 sectors), 59560 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <LG CD-RW CED-8120B/1.02> CD-RW drive at ata1 as master
acd0: read 4134KB/s (5512KB/s) write 2067KB/s (2067KB/s), 8192KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ata1-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-slave: success setting PIO4 on generic chip
acd1: <CD-ROM 50X L/17> CDROM drive at ata1 as slave
acd1: read 8593KB/s (8593KB/s), 128KB buffer, PIO4
acd1: Reads: CD-R, CD-RW, CD-DA stream, packet
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray
acd1: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xc, start 63, end = 19824209, size 19824147 : OK
ad0s2: type 0xa5, start 19824210, end = 60034904, size 40210695 : OK
start_init: trying /sbin/init
splash: image decoder found: blank_saver
--Part10105110822.D312--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?EXECMAIL.10105110816.E312>