Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 10 Feb 1998 16:46:02 -0800
From:      Nicole Harrington  <nicole@mediacity.com>
To:        The experts  <freebsd-questions@FreeBSD.ORG>
Subject:   RAID go BOOM!  :<
Message-ID:  <Chameleon.887158496.nmh@geekgirl>
References:  <199802110012.QAA00224@test.mediacity.com> 

next in thread | previous in thread | raw e-mail | index | archive | help

Greetings all
 With some wonderfull help from Julian E. I was able to get my SCSI-SCSI RAID 
system going by adding the proper multi LUN support to my kernel. Well, 
unknown to me until I got to work today, The RAID 5 partion using LUN2 is 
having major troubles as shown below. ( I was telneted in and failed to look 
at /var/log/messages)

 I am using an adaptec 2940UW card and I have tried every setting I though 
could be relevant. I called the manufacturer of the RAID controler, CMD, and 
they grumbled a bit about FreeBSD/UNIX and has yet to be able to offer any 
good suggestions. Could there be further settings needed for the Lun1 support? 
the LUN0 mirror segment works great.

 Anyone have any idea's where I could start ?


 Thanks 


  Nicole
   trying not to break out the hammer....



 Feb 10 16:08:34 test su: nicole to root on /dev/ttyp0
 Feb 10 16:10:10 test /kernel: sd0(ahc0:0:0): SCB 0x1 - timed out while idle, 
LASTPHASE == 0x1, SCSISIGI == 0x0
 Feb 10 16:10:20 test /kernel: SEQADDR = 0x4 SCSISEQ = 0x12 SSTAT0 = 0x27 
SSTAT1 = 0xb
 Feb 10 16:10:20 test /kernel: sd0(ahc0:0:0): SCB 1: Immediate reset.  Flags = 
0x1
 Feb 10 16:10:20 test /kernel: sd0(ahc0:0:0): no longer in timeout
 Feb 10 16:10:20 test /kernel: ahc0: Issued Channel A Bus Reset. 2 SCBs 
aborted
 Feb 10 16:10:20 test /kernel: sd1(ahc0:0:1): UNIT ATTENTION asc:29,0
 Feb 10 16:10:20 test /kernel: sd1(ahc0:0:1):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:10:20 test /kernel: , retries:3
 Feb 10 16:10:20 test /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
 Feb 10 16:10:20 test /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:10:20 test /kernel: , retries:3
 Feb 10 16:10:20 test /kernel: sd0(ahc0:0:0): SCB 0x0 - timed out while idle, 
LASTPHASE == 0x1, SCSISIGI == 0x0
 Feb 10 16:10:20 test /kernel: SEQADDR = 0x6 SCSISEQ = 0x12 SSTAT0 = 0x5 
SSTAT1 = 0xa
 Feb 10 16:10:20 test /kernel: sd0(ahc0:0:0): SCB 0: Immediate reset.  Flags = 
0x1
 Feb 10 16:10:20 test /kernel: sd0(ahc0:0:0): no longer in timeout
 Feb 10 16:10:20 test /kernel: ahc0: Issued Channel A Bus Reset. 2 SCBs 
aborted
 Feb 10 16:10:20 test /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
 Feb 10 16:10:20 test /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:10:20 test /kernel: , retries:3
 Feb 10 16:10:20 test /kernel: sd1(ahc0:0:1): UNIT ATTENTION asc:29,0
 Feb 10 16:10:20 test /kernel: sd1(ahc0:0:1):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:10:20 test /kernel: , retries:3
 Feb 10 16:10:41 test /kernel: sd0(ahc0:0:0): SCB 0x1 - timed out while idle, 
LASTPHASE == 0x1, SCSISIGI == 0x0
 Feb 10 16:10:41 test /kernel: SEQADDR = 0x7 SCSISEQ = 0x12 SSTAT0 = 0x5 
SSTAT1 = 0xa
 Feb 10 16:10:41 test /kernel: sd0(ahc0:0:0): SCB 1: Immediate reset.  Flags = 
0x1
 Feb 10 16:10:41 test /kernel: sd0(ahc0:0:0): no longer in timeout
 Feb 10 16:10:41 test /kernel: ahc0: Issued Channel A Bus Reset. 1 SCBs 
aborted
 Feb 10 16:10:41 test /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
 Feb 10 16:10:41 test /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:10:41 test /kernel: , retries:3
 Feb 10 16:10:41 test /kernel: sd1(ahc0:0:1): UNIT ATTENTION asc:29,0
 Feb 10 16:10:41 test /kernel: sd1(ahc0:0:1):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:10:41 test /kernel: , retries:4
 Feb 10 16:11:01 test login: login on ttyv0 as root
 Feb 10 16:11:01 test login: ROOT LOGIN (root) ON ttyv0
 Feb 10 16:11:09 test /kernel: sd0(ahc0:0:0): SCB 0x1 - timed out while idle, 
LASTPHASE == 0x1, SCSISIGI == 0x0
 Feb 10 16:11:09 test /kernel: SEQADDR = 0x8 SCSISEQ = 0x12 SSTAT0 = 0x5 
SSTAT1 = 0xa
 Feb 10 16:11:09 test /kernel: sd0(ahc0:0:0): SCB 1: Immediate reset.  Flags = 
0x1
 Feb 10 16:11:09 test /kernel: sd0(ahc0:0:0): no longer in timeout
 Feb 10 16:11:09 test /kernel: ahc0: Issued Channel A Bus Reset. 2 SCBs 
aborted
 Feb 10 16:11:09 test /kernel: sd1(ahc0:0:1): UNIT ATTENTION asc:29,0
 Feb 10 16:11:09 test /kernel: sd1(ahc0:0:1):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:11:09 test /kernel: , retries:3
 Feb 10 16:11:09 test /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
 Feb 10 16:11:09 test /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:11:09 test /kernel: , retries:3
 Feb 10 16:11:19 test /kernel: sd0(ahc0:0:0): SCB 0x1 - timed out while idle, 
LASTPHASE == 0x1, SCSISIGI == 0x0
 Feb 10 16:11:19 test /kernel: SEQADDR = 0x7 SCSISEQ = 0x12 SSTAT0 = 0x27 
SSTAT1 = 0xb
 Feb 10 16:11:19 test /kernel: sd0(ahc0:0:0): SCB 1: Immediate reset.  Flags = 
0x1
 Feb 10 16:11:19 test /kernel: sd0(ahc0:0:0): no longer in timeout
 Feb 10 16:11:19 test /kernel: ahc0: Issued Channel A Bus Reset. 2 SCBs 
aborted
 Feb 10 16:11:19 test /kernel: sd1(ahc0:0:1): UNIT ATTENTION asc:29,0
 Feb 10 16:11:19 test /kernel: sd1(ahc0:0:1):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:11:19 test /kernel: , retries:3
 Feb 10 16:11:19 test /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
 Feb 10 16:11:19 test /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:11:19 test /kernel: , retries:1
 Feb 10 16:11:29 test /kernel: sd1(ahc0:0:1): SCB 0x0 - timed out while idle, 
LASTPHASE == 0x1, SCSISIGI == 0x0
 Feb 10 16:11:29 test /kernel: SEQADDR = 0x8 SCSISEQ = 0x12 SSTAT0 = 0x5 
SSTAT1 = 0xa
 Feb 10 16:11:29 test /kernel: sd1(ahc0:0:1): SCB 0: Immediate reset.  Flags = 
0x1
 Feb 10 16:11:29 test /kernel: sd1(ahc0:0:1): no longer in timeout
 Feb 10 16:11:29 test /kernel: ahc0: Issued Channel A Bus Reset. 1 SCBs 
aborted
 Feb 10 16:11:29 test /kernel: sd1(ahc0:0:1): UNIT ATTENTION asc:29,0
 Feb 10 16:11:29 test /kernel: sd1(ahc0:0:1):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:11:29 test /kernel: , retries:1
 Feb 10 16:11:29 test /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
 Feb 10 16:11:29 test /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:11:29 test /kernel: , retries:4
 Feb 10 16:11:41 test /kernel: sd0(ahc0:0:0): SCB 0x2 - timed out in dataout 
phase, SCSISIGI == 0xc6
 Feb 10 16:11:41 test /kernel: SEQADDR = 0x122 SCSISEQ = 0x12 SSTAT0 = 0x5 
SSTAT1 = 0x13
 Feb 10 16:11:41 test /kernel: sd1(ahc0:0:1): abort message in message buffer
 Feb 10 16:11:41 test /kernel: Unexpected busfree.  LASTPHASE == 0xc0
 Feb 10 16:11:41 test /kernel: SEQADDR == 0x41
 Feb 10 16:11:41 test /kernel: sd1(ahc0:0:1): no longer in timeout
 Feb 10 16:11:51 test /kernel: sd0(ahc0:0:0): SCB 0x2 - timed out in command 
phase, SCSISIGI == 0xe6
 Feb 10 16:11:53 test /kernel: SEQADDR = 0x41 SCSISEQ = 0x12 SSTAT0 = 0x7 
SSTAT1 = 0x13
 Feb 10 16:11:53 test /kernel: sd1(ahc0:0:1): abort message in message buffer
 Feb 10 16:11:53 test /kernel: ahc0:A:0: Missed busfree.
 Feb 10 16:11:53 test /kernel: sd1(ahc0:0:1): SCB 0x0 - timed out while idle, 
LASTPHASE == 0x1, SCSISIGI == 0xb6
 Feb 10 16:11:53 test /kernel: SEQADDR = 0x5 SCSISEQ = 0x12 SSTAT0 = 0x7 
SSTAT1 = 0x13
 Feb 10 16:11:53 test /kernel: sd1(ahc0:0:1): no longer in timeout
 Feb 10 16:11:53 test /kernel: ahc0: Issued Channel A Bus Reset. 3 SCBs 
aborted
 Feb 10 16:11:53 test /kernel: sd1(ahc0:0:1): UNIT ATTENTION asc:29,0
 Feb 10 16:11:53 test /kernel: sd1(ahc0:0:1):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:11:53 test /kernel: , retries:3
 Feb 10 16:11:53 test /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
 Feb 10 16:11:53 test /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:11:53 test /kernel: , retries:3
 Feb 10 16:12:11 test /kernel: sd1(ahc0:0:1): SCB 0x2 - timed out while idle, 
LASTPHASE == 0x1, SCSISIGI == 0x0
 Feb 10 16:12:11 test /kernel: SEQADDR = 0x7 SCSISEQ = 0x12 SSTAT0 = 0x5 
SSTAT1 = 0xa
 Feb 10 16:12:11 test /kernel: sd1(ahc0:0:1): SCB 2: Immediate reset.  Flags = 
0x1
 Feb 10 16:12:11 test /kernel: sd1(ahc0:0:1): no longer in timeout
 Feb 10 16:12:11 test /kernel: ahc0: Issued Channel A Bus Reset. 1 SCBs 
aborted
 Feb 10 16:12:11 test /kernel: sd1(ahc0:0:1): UNIT ATTENTION asc:29,0
 Feb 10 16:12:11 test /kernel: sd1(ahc0:0:1):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:12:11 test /kernel: , retries:3
 Feb 10 16:12:11 test /kernel: sd0(ahc0:0:0): UNIT ATTENTION asc:29,0
 Feb 10 16:12:11 test /kernel: sd0(ahc0:0:0):  Power on, reset, or bus device 
reset occurred
 Feb 10 16:12:11 test /kernel: , retries:4
 

---------------End of Original Message-----------------


 Nicole Harrington      |\ __ /|   (`\ http://www.mediacity.com
 nicole@mediacity.com   | o_o  |__  ) )   Phone: 415-237-1464 
 nicole@iadmin.net     //      \\         Pager: 415-301-2482
	           Systems Administrator
----------------------(((---(((---------------------------------
 *******             
  *   *       What do you mean Spelling Errors? 
   * *                       My Modem is Error Correcting!
    * 

 -- Isn't it a bit unnerving that doctors call what they do practice
 -- Why isn't there mouse-flavored cat food?
 
 -- Microsoft: What bug would you like today?
-------------------------------------------------------------------


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Chameleon.887158496.nmh>