Date: Thu, 6 Nov 1997 08:01:50 -0600 From: Raul Zighelboim <mango@staff.communique.net> To: "'hackers@freefall.freebsd.org'" <hackers@freefall.freebsd.org> Cc: Jacques Vidrine <nectar@staff.communique.net> Subject: Help! system crashing! Message-ID: <A03CD00C69B1D01195AB00A024ECEB16451C6E@kaori.communique.net>
next in thread | raw e-mail | index | archive | help
This is what the console says:
-----------
panic: RAM parity error, likely hardware failure.
syncing disks... 474 473 464 453 431 405 372 316 240 146 41 1 1 1 1 1 1
1 1 1 giving up
Automatic reboot in 15 seconds - press a key on the console to abort
--------------
I am using EDO non-parity RAM.
Just in case, this is the system:
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 2.2.2-RELEASE #0: Thu Nov 6 07:55:43 CST 1997
root@:/usr/src/sys/compile/KIYOKO
CPU: Pentium Pro (199.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping=9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,<b11>,MTRR,PGE,M
CA,CMOV>
real memory = 536870912 (524288K bytes)
avail memory = 523280384 (511016K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82440FX (Natoma) PCI and memory controller> rev 2 on pci0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 9 on pci0:12
ahc0: aic7880 Wide Channel, SCSI Id=7, 16/255 SCBs
ahc0 waiting for scsi devices to settle
ahc0: target 0 Tagged Queuing Device
(ahc0:0:0): "SEAGATE ST410800W 0006" type 0 fixed SCSI 2
sd1(ahc0:0:0): Direct-Access 8669MB (17755614 512 byte sectors)
ahc0: target 1 Tagged Queuing Device
(ahc0:1:0): "SEAGATE ST410800W 0006" type 0 fixed SCSI 2
sd2(ahc0:1:0): Direct-Access 8669MB (17755614 512 byte sectors)
ahc0: target 2 Tagged Queuing Device
(ahc0:2:0): "SEAGATE ST410800W 0006" type 0 fixed SCSI 2
sd3(ahc0:2:0): Direct-Access 8669MB (17755614 512 byte sectors)
ahc0: target 3 Tagged Queuing Device
(ahc0:3:0): "QUANTUM VIKING 4.5 WSE 8808" type 0 fixed SCSI 2
sd0(ahc0:3:0): Direct-Access 4345MB (8899737 512 byte sectors)
ahc1 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 10 on
pci0:13
ahc1: aic7880 Wide Channel, SCSI Id=7, 16/255 SCBs
ahc1 waiting for scsi devices to settle
ahc1: target 1 Tagged Queuing Device
(ahc1:1:0): "QUANTUM VIKING 2.3 WSE 8808" type 0 fixed SCSI 2
sd5(ahc1:1:0): Direct-Access 2171MB (4446801 512 byte sectors)
ahc1: target 2 Tagged Queuing Device
(ahc1:2:0): "QUANTUM VIKING 2.3 WSE 8808" type 0 fixed SCSI 2
sd6(ahc1:2:0): Direct-Access 2171MB (4446801 512 byte sectors)
ahc1: target 3 Tagged Queuing Device
(ahc1:3:0): "QUANTUM VIKING 2.3 WSE 8808" type 0 fixed SCSI 2
sd7(ahc1:3:0): Direct-Access 2171MB (4446801 512 byte sectors)
ahc1: target 4 Tagged Queuing Device
(ahc1:4:0): "QUANTUM VIKING 2.3 WSE 8808" type 0 fixed SCSI 2
sd8(ahc1:4:0): Direct-Access 2171MB (4446801 512 byte sectors)
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 2 int a irq 11 on
pci0:14
fxp0: Ethernet address 00:a0:c9:66:eb:72
Probing for devices on the ISA bus:
vt0 at 0x60-0x6f irq 1 on motherboard
vt0: tvga 8900cl, 80/132 col, color, 8 scr, mf2-kbd, [R3.20-b24]
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
ccd0-5: Concatenated disk drivers
IP packet filtering initialized, divert disabled, unlimited logging
swapon: adding /dev/sd0s1b as swap device
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A03CD00C69B1D01195AB00A024ECEB16451C6E>