Date: Tue, 04 Sep 2001 22:26:18 +0200 From: Lars =?iso-8859-1?Q?K=F6ller?= <lkoeller@cc.fh-lippe.de> To: "Justin T. Gibbs" <gibbs@scsiguy.com>, "Kenneth D. Merry" <ken@plutotech.com> Cc: freebsd-scsi@FreeBSD.ORG, lkoeller@FreeBSD.org Subject: Wire of SCSI devices gives warning messages Message-ID: <200109042026.f84KQIb01056@odie.lippe.de>
next in thread | raw e-mail | index | archive | help
-------- Dear Justin, Kenneth! I use wired scsi devices since years, and it wored lik a charm up to = now. It seems still working, but during boot up I get the following = messages: I ask you cause I didn't see any mistake in my configuration but want = to avoid making a foolish PR. =2E... Waiting 8 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! sa0 at ahc0 bus 0 target 4 lun 0 sa0: <ARCHIVE Python 28388-XXX 5ACB> Removable Sequential Access SCSI-2 d= evice = sa0: 7.812MB/s transfers (7.812MHz, offset 15) (pass0:ahc0:0:4:0): Duplicate Wired Device entry! (pass0:ahc0:0:4:0): Second device (pass device at scbus0 target 5 lun 0) = will no t be wired (pass0:ahc0:0:4:0): Duplicate Wired Device entry! (pass0:ahc0:0:4:0): Second device (pass device at scbus0 target 8 lun 0) = will no t be wired da1 at ahc1 bus 0 target 8 lun 0 da1: <DEC RZ2DD-LS (C) DEC 0306> Fixed Direct Access SCSI-2 device = da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing E= nabled da1: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C) da3 at ahc1 bus 0 target 9 lun 0 da3: <SEAGATE ST32171W 0338> Fixed Direct Access SCSI-2 device = da3: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing E= nabled da3: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C) da4 at ahc1 bus 0 target 10 lun 0 da4: <SEAGATE ST32171W 0338> Fixed Direct Access SCSI-2 device = da4: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing E= nabled da4: 2061MB (4222640 512 byte sectors: 255H 63S/T 262C) cd2 at ahc1 bus 0 target 5 lun 0 cd2: <PIONEER CD-ROM DR-U10X 1.07> Removable CD-ROM SCSI-2 device = cd2: 10.000MB/s transfers (10.000MHz, offset 15) cd2: cd present [331802 x 2048 byte records] da0 at ahc1 bus 0 target 0 lun 0 da0: <SEAGATE ST15150N 0017> Fixed Direct Access SCSI-2 device = da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled= da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C) cd3 at ahc1 bus 0 target 6 lun 0 cd3: <PIONEER CD-ROM DR-U12X 1.06> Removable CD-ROM SCSI-2 device = cd3: 10.000MB/s transfers (10.000MHz, offset 15) cd3: cd present [345419 x 2048 byte records] da2 at ahc0 bus 0 target 8 lun 0 da2: <SEAGATE ST19101W 0014> Fixed Direct Access SCSI-2 device = da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing E= nabled da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) Mounting root from ufs:/dev/da1s1a ccd0-3: Concatenated disk drivers lpt0: switched to polled extended mode /dev/vmmon: Module vmmon: registered with major=3D200 minor=3D0 tag=3D$Na= me: build-570 $ /dev/vmmon: Module vmmon: initialized fxp0: promiscuous mode enabled vmnet1: promiscuous mode enabled cd0 at ahc0 bus 0 target 5 lun 0 cd0: <PLEXTOR CD-ROM PX-40TS 1.04> Removable CD-ROM SCSI-2 device = cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present -= tray c losed There are two identical Ultra wide Adaptex controllers used: ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd400-0xd4ff mem 0xdefee000= -0xdefe efff irq 11 at device 9.0 on pci0 ahc1: <Adaptec 2940 Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xdefef000= -0xdefe ffff irq 9 at device 12.0 on pci0 The kernel config file has the following entries: =2E... device ahc0 # AHA2940 and onboard AIC7xxx devices device ahc1 # device scbus0 at ahc0 # bus (required) device scbus1 at ahc1 # bus (required) device da # Access (disks) device sa # Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI) # device da0 at scbus1 target 0 # Seagate ST15150N device da1 at scbus1 target 8 # Seagate ST39102LW (DEC) device da2 at scbus0 target 8 # Seagate ST19101W device da3 at scbus1 target 9 # Seagate ST32171W device da4 at scbus1 target 10 # Seagate ST32171W # device pass15 at scbus0 target 3 # UMAX Astra 2200 # device sa0 at scbus0 target 4 # Seagate Python 28388 # device cd0 at scbus0 target 5 # Plextor PX-40TS device cd1 at scbus0 target 6 # Ricoh 7060S device cd2 at scbus1 target 5 # Pioneer DR-U10x device cd3 at scbus1 target 6 # Pioneer DR-U12x camcontrol devlist: <ARCHIVE Python 28388-XXX 5ACB> at scbus0 target 4 lun 0 (pass0,sa0) <PLEXTOR CD-ROM PX-40TS 1.04> at scbus0 target 5 lun 0 (pass1,cd0) <SEAGATE ST19101W 0014> at scbus0 target 8 lun 0 (pass2,da2) <SEAGATE ST15150N 0017> at scbus1 target 0 lun 0 (pass3,da0) <PIONEER CD-ROM DR-U10X 1.07> at scbus1 target 5 lun 0 (pass4,cd2) <PIONEER CD-ROM DR-U12X 1.06> at scbus1 target 6 lun 0 (pass5,cd3) <DEC RZ2DD-LS (C) DEC 0306> at scbus1 target 8 lun 0 (pass6,da1) <SEAGATE ST32171W 0338> at scbus1 target 9 lun 0 (pass7,da3) <SEAGATE ST32171W 0338> at scbus1 target 10 lun 0 (pass8,da4) Do you have any idea where the kernel messages above results from? What have I missed? Thank you very mutch and best regards Lars -- = Lars K=F6ller E-Mail: lkoeller@cc.fh-lippe.de (LKoeller@FreeBSD.ORG) PGP-key: http://www.pgp.net/pgpnet/www-key.html -------- FreeBSD, was sonst? ---- http://www.de.freebsd.org -------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200109042026.f84KQIb01056>