From owner-freebsd-mobile Mon May 6 6:43:32 2002 Delivered-To: freebsd-mobile@freebsd.org Received: from mercury.gennex.com.au (CPE-144-132-60-7.vic.bigpond.net.au [144.132.60.7]) by hub.freebsd.org (Postfix) with ESMTP id 4179C37B403; Mon, 6 May 2002 06:42:20 -0700 (PDT) Received: from SCOTT (jupiter [192.168.40.1]) by mercury.gennex.com.au (8.11.6/8.11.6) with SMTP id g46DgCT08795; Mon, 6 May 2002 23:42:13 +1000 (EST) (envelope-from scott.penno@gennex.com.au) Message-ID: <002801c1f503$c6db1c80$0128a8c0@SCOTT> From: "Scott Penno" To: , References: <000201c1f377$e7668d00$0128a8c0@SCOTT> <004e01c1f4ec$56f52490$0128a8c0@SCOTT> Subject: Re: Problems with Dell Inspiron 2500/NEWCARD/Xircom CBEM56G Date: Mon, 6 May 2002 23:41:49 +1000 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org I removed apm from the kernel which appeared to be playing having with acpi and things are now working a treat. The card works fine, however I do receive the following message, 'cardbus0: (vendor=0x115d, dev=0x0103) at 0.1 irq 5'. I've had a look through various lists and couldn't find a resolution. Is this a real drama and if so, how do I correct it? Regards, Scott ----- Original Message ----- From: "Scott Penno" To: ; Sent: Monday, May 06, 2002 8:54 PM Subject: Problems with Dell Inspiron 2500/NEWCARD/Xircom CBEM56G > Just an update. I've tried three different 32 bit cards and every time the > card was inserted the laptop locked up. I recompiled the kernel without the > miibus and dc and then inserted the Xircom card the laptop would appear to > lock up, that is, everything that was running just stopped. When the card > was re-inserted, everything would come back to life and a console message > would appear reporting 'pccbb0: Cardbus card activation failed'. A similar > result was experienced with the other cards. With that said, I'm still no > closer to identifying the cause of these problems. Any ideas? > > Scott. > > > > ----- Original Message ----- > From: "Scott Penno" > To: ; > Sent: Sunday, May 05, 2002 12:27 AM > Subject: Problems with Dell Inspiron 2500/NEWCARD/Xircom CBEM56G [DRAFT] > > > > Hi there, > > > > I've been attempting to get my Xircom Realport CBEM56G working under > CURRENT > > for some time without success. I grabbed the latest source on 03/05 > 12:00PM > > GMT and compiled without a problem. I have a 3Com Etherlink III 3C589D > card > > which is a 16 bit card which I can insert and use without a problem. > > However when I try and insert my Xircom Realport CBEM56G, my laptop locks > > up. > > Under 4.X the cardbus bridge caused some intial problems getting > configured > > but once working, worked a treat and I suspect this is where the current > > problem is. Without the kernel option PCI_ALLOW_UNSUPPORTED_IO_RANGE with > > NEWCARD, I'm unable to > > acheive any card functionality, when compiled with this option the 16 bit > > 3Com card works fine but the 32bit Xircom card causes a lockup. > Interesting > > to note also that under Windows XP and FreeBSD 4.X the bridge is detected > as > > an OZ6933, while under FreeBSD 5.X it's detected as an OZ6833. > > Not sure where to go from here so any assistance appreciated. I've > included > > a dmesg from boot -v with the 3Com card, console messages when the Xircom > > card is inserted until the lockup occurs and finally the kernel > > configuration file. > > > > Regards, > > > > Scott. > > > > > > > > Copyright (c) 1992-2002 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD 5.0-CURRENT #2: Sat May 4 12:13:42 EST 2002 > > root@jupiter.gennex.com.au:/usr/obj/usr/src/sys/JUPITER > > Preloaded elf kernel "/boot/kernel/kernel" at 0xc043b000. > > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc043b0b4. > > Calibrating clock(s) ... TSC clock: 897239123 Hz, i8254 clock: 1193138 Hz > > CLK_USE_I8254_CALIBRATION not specified - using default frequency > > Timecounter "i8254" frequency 1193182 Hz > > CLK_USE_TSC_CALIBRATION not specified - using old calibration method > > TSC initialization skipped: APM enabled. > > CPU: Pentium III/Pentium III Xeon/Celeron (897.28-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0x68a Stepping = 10 > > > > > Features=0x383f9ff > PAT,PSE36,MMX,FXSR,SSE> > > real memory = 266797056 (260544K bytes) > > Physical memory chunk(s): > > 0x00001000 - 0x0009efff, 647168 bytes (158 pages) > > 0x00462000 - 0x0fe67fff, 262168576 bytes (64006 pages) > > avail memory = 254808064 (248836K bytes) > > bios32: Found BIOS32 Service Directory header at 0xc00f66b0 > > bios32: Entry = 0xfd890 (c00fd890) Rev = 0 Len = 1 > > pcibios: PCI BIOS entry at 0xfd890+0x13a > > pnpbios: Found PnP BIOS data at 0xc00f6700 > > pnpbios: Entry = f0000:a2a6 Rev = 1.0 > > Other BIOS signatures found: > > null: > > random: > > mem: > > Pentium Pro MTRR support enabled > > VESA: information block > > 56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00 > > 00 01 10 00 00 01 31 01 00 01 43 01 00 01 5d 01 > > 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > VESA: 16 mode(s) found > > VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc03895c0 (1000040) > > VESA: Intel815M(TM) Graphics Chip Accelerated VGA BIOS > > VESA: Intel Corporation i815M Graphics Controller Hardware Version 0.0 > > pci_open(1): mode 1 addr port (0x0cf8) is 0x80001004 > > pci_open(1a): mode1res=0x80000000 (0x80000000) > > pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) > > Using $PIR table, 7 entries at 0xc00fdf50 > > apm0: on motherboard > > apm0: found APM BIOS v1.2, connected at v1.2 > > npx0: on motherboard > > npx0: INT 16 interface > > acpi0: Other PM system enabled. > > pcib0: at pcibus 0 on > > motherboard > > pci0: physical bus=0 > > found-> vendor=0x8086, dev=0x1130, revid=0x11 > > bus=0, slot=0, func=0 > > class=06-00-00, hdrtype=0x00, mfdev=0 > > map[10]: type 3, range 32, base f8000000, size 26, enabled > > map[14]: type 1, range 32, base f4000000, size 19, enabled > > found-> vendor=0x8086, dev=0x1132, revid=0x11 > > bus=0, slot=2, func=0 > > class=03-00-00, hdrtype=0x00, mfdev=0 > > intpin=a, irq=10 > > powerspec 2 supports D0 D3 current D0 > > found-> vendor=0x8086, dev=0x2448, revid=0x03 > > bus=0, slot=30, func=0 > > class=06-04-00, hdrtype=0x01, mfdev=0 > > found-> vendor=0x8086, dev=0x244c, revid=0x03 > > bus=0, slot=31, func=0 > > class=06-01-00, hdrtype=0x00, mfdev=1 > > map[20]: type 4, range 32, base 00001800, size 4, enabled > > found-> vendor=0x8086, dev=0x244a, revid=0x03 > > bus=0, slot=31, func=1 > > class=01-01-80, hdrtype=0x00, mfdev=0 > > map[20]: type 4, range 32, base 00001820, size 5, enabled > > found-> vendor=0x8086, dev=0x2442, revid=0x03 > > bus=0, slot=31, func=2 > > class=0c-03-00, hdrtype=0x00, mfdev=0 > > intpin=d, irq=5 > > map[20]: type 4, range 32, base 00001810, size 4, enabled > > found-> vendor=0x8086, dev=0x2443, revid=0x03 > > bus=0, slot=31, func=3 > > class=0c-05-00, hdrtype=0x00, mfdev=0 > > intpin=b, irq=5 > > map[20]: type 4, range 32, base 00001880, size 5, enabled > > found-> vendor=0x8086, dev=0x2444, revid=0x03 > > bus=0, slot=31, func=4 > > class=0c-03-00, hdrtype=0x00, mfdev=0 > > intpin=c, irq=5 > > map[10]: type 4, range 32, base 00001c00, size 8, enabled > > map[14]: type 4, range 32, base 00001840, size 6, enabled > > found-> vendor=0x8086, dev=0x2445, revid=0x03 > > bus=0, slot=31, func=5 > > class=04-01-00, hdrtype=0x00, mfdev=0 > > intpin=b, irq=5 > > pci0: on pcib0 > > agp0: mem > > 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 10 at device 2.0 on pci0 > > agp0: allocating GATT for aperture of size 64M > > pcib1: at device 30.0 on pci0 > > pcib1: secondary bus 1 > > pcib1: subordinate bus 1 > > pcib1: I/O decode 0xf000-0xfff > > pcib1: memory decode 0xfff00000-0xfffff > > pcib1: prefetched decode 0xfff00000-0xfffff > > pci1: physical bus=1 > > found-> vendor=0x1217, dev=0x6933, revid=0x01 > > bus=1, slot=3, func=0 > > class=06-07-00, hdrtype=0x02, mfdev=1 > > intpin=a, irq=9 > > powerspec 2 supports D0 D1 D2 D3 current D0 > > found-> vendor=0x1217, dev=0x6933, revid=0x01 > > bus=1, slot=3, func=1 > > class=06-07-00, hdrtype=0x02, mfdev=1 > > intpin=b, irq=9 > > powerspec 2 supports D0 D1 D2 D3 current D0 > > pci1: on pcib1 > > pccbb0: irq 9 at device 3.0 on pci1 > > start (84000000) < sc->membase (fff00000) > > end (ffffffff) > sc->memlimit (fffff) > > pcib1: device pccbb0 requested unsupported memory range > > 0x84000000-0xffffffff (decoding 0xfff00000-0xfffff, 0xfff00000-0xfffff) > > pcib1: device pccbb0 requested decoded memory range 0x84000000-0xffffffff > > cardbus0: on pccbb0 > > pccard0: <16-bit PCCard bus> on pccbb0 > > pccbb1: irq 9 at device 3.1 on pci1 > > start (84000000) < sc->membase (fff00000) > > end (ffffffff) > sc->memlimit (fffff) > > pcib1: device pccbb1 requested unsupported memory range > > 0x84000000-0xffffffff (decoding 0xfff00000-0xfffff, 0xfff00000-0xfffff) > > pcib1: device pccbb1 requested decoded memory range 0x84000000-0xffffffff > > cardbus1: on pccbb1 > > pccard1: <16-bit PCCard bus> on pccbb1 > > isab0: at device 31.0 on pci0 > > isa0: on isab0 > > atapci0: port 0x1800-0x180f at device 31.1 > on > > pci0 > > ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1800 > > ata0: mask=03 ostat0=50 ostat2=00 > > ata0-master: ATAPI 00 00 > > ata0-slave: ATAPI 00 00 > > ata0: mask=03 stat0=50 stat1=00 > > ata0-master: ATA 01 a5 > > ata0: devices=01 > > ata0: at 0x1f0 irq 14 on atapci0 > > ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1808 > > ata1: mask=03 ostat0=50 ostat2=00 > > ata1-master: ATAPI 14 eb > > ata1-slave: ATAPI 00 00 > > ata1: mask=03 stat0=00 stat1=00 > > ata1: devices=04 > > ata1: at 0x170 irq 15 on atapci0 > > pci0: at device 31.2 (no driver attached) > > pci0: at device 31.3 (no driver attached) > > pci0: at device 31.4 (no driver attached) > > pcm0: port 0x1840-0x187f,0x1c00-0x1cff irq 5 at > > device 31.5 on pci0 > > pcm0: ac97 codec id 0x83847600 (SigmaTel STAC9700/9783/9784) > > pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, > > SigmaTel 3D Enhancement > > pcm0: sndbuf_setmap 71000, 4000; 0xd1dca000 -> 71000 > > pcm0: sndbuf_setmap 8e000, 4000; 0xd1dd7000 -> 8e000 > > pcm0: measured ac97 link rate at 29293 Hz > > ata: ata0 already exists; skipping it > > ata: ata1 already exists; skipping it > > Trying Read_Port at 203 > > Trying Read_Port at 243 > > Trying Read_Port at 283 > > Trying Read_Port at 2c3 > > Trying Read_Port at 303 > > Trying Read_Port at 343 > > Trying Read_Port at 383 > > Trying Read_Port at 3c3 > > sc: sc0 already exists; skipping it > > vga: vga0 already exists; skipping it > > isa_probe_children: disabling PnP devices > > isa_probe_children: probing non-PnP devices > > orm0: