Date: Wed, 29 Jan 2014 22:14:39 +0100 From: Koop Mast <kwm@rainbow-runner.nl> To: Torfinn Ingolfsen <tingox@gmail.com>, FreeBSD Ports ML <freebsd-ports@freebsd.org> Subject: Re: devel/libgee 0.8.5 fails to build Message-ID: <52E96F3F.2050902@rainbow-runner.nl> In-Reply-To: <52E8D551.9060905@rainbow-runner.nl> References: <CAJ_iqtYfvQuuRTgoM-70JTJYbfYiLU8cZCXrBStNsqLJpP=PnQ@mail.gmail.com> <52E7E086.9070804@rainbow-runner.nl> <CAJ_iqtaWTHWOB7QX3ayfw25S=1Gazk4o2gx6rxV6vQZc9CP-nQ@mail.gmail.com> <52E8D551.9060905@rainbow-runner.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On 29-1-2014 11:17, Koop Mast wrote: > On 28-1-2014 18:12, Torfinn Ingolfsen wrote: >> Hello, >> >> On Tue, Jan 28, 2014 at 5:53 PM, Koop Mast <kwm@rainbow-runner.nl> >> wrote: >>> Hmm the element warnings seem to be harmless, but the but the above >>> gvfs >>> warning seems to be more interesting. Could you rebuild/install gvfs >>> and see >>> if that would fix this? >> reinstalling gvfs does not fix this. >> >>> I assume you have gvfs installed with the gphoto and hal options? >> Why do you assume I have those options set? >> Anyway here is the gvfs config I am using: >> >> root@kg-v7# cd /usr/ports/devel/gvfs >> root@kg-v7# make showconfig >> ===> The following configuration options are available for >> gvfs-1.12.3_2: >> AVAHI=on: Zeroconf support via Avahi >> CDDA=off: CDDA (enables HAL) >> FUSE=off: FUSE (Filesystem in Userspace) support >> GPHOTO2=off: Gphoto 2 camera support (enables HAL) >> HAL=off: HAL (Hardware Abstraction Layer) support >> SAMBA=on: Samba support >> ===> Use 'make config' to modify these settings >> >> HTH > I reproduced the problem, will work on a fix when I get back home > after work. > > -Koop Should be fixed now, thanks for reporting! -Koop
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52E96F3F.2050902>