Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 01 Aug 1995 16:06:30 +1000
From:      Stephen Hocking <sysseh@devetir.qld.gov.au>
To:        current@freebsd.org
Subject:   Last lot of sound changes breaks NAS
Message-ID:  <199508010606.GAA13927@netfl15a.devetir.qld.gov.au>

next in thread | raw e-mail | index | archive | help
Hangs on the following call

auvoxware CALL  ioctl(0x3,0x20005001 ,0) 

which is probably a DSP_SYNC.

The card does emit a high pitched whine though. Killing the server and doing a 
few cat's to /dev/audio then causes the machine to crash. Note that I am 
attempting to run this in eight bit mode.

Hardware config as follows......
FreeBSD 2.2-CURRENT #0: Tue Aug  1 14:56:18 EST 1995
    toor@priapus.devetir.qld.gov.au:/usr/src/sys/compile/priapus
CPU: i486 DX2 (486-class CPU)
  Origin = "GenuineIntel"  Id = 0x435  Stepping=5
  Features=0x3<FPU,VME>
avail memory = 14856192 (3627 pages)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 10 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:12:ae:5e, type WD8013EPC (16 bit)
bpf: ed0 attached
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16450
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16450
pca0 on isa
pca0: PC speaker audio driver
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SAMSUNG SHD-3212A (APOLLO-4) AD>
wd0: 407MB (833664 sectors), 1002 cyls, 16 heads, 52 S/T, 512 B/S
wdc0: unit 1 (wd1): <Conner Peripherals 850MB - CFA850A>
wd1: 813MB (1665216 sectors), 1652 cyls, 16 heads, 63 S/T, 512 B/S
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
npx0 on motherboard
npx0: INT 16 interface
opl0 at 0x388 on isa
opl0: <Yamaha OPL-3 FM>
sb0 at 0x220 irq 9 drq 1 on isa
sb0: <SoundBlaster 16 4.12>
sbxvi0 at 0x0 drq 5 on isa
sbxvo0: <SoundBlaster 16 4.12>
sbmidi0 at 0x300 on isa
 <SoundBlaster MPU-401>
joy0 at 0x201 on isa
joy0: joystick
bpf: ds0 attached
bpf: lo0 attached
bpf: sl0 attached
bpf: sl1 attached
bpf: tun0 attached
wd0: rejecting partition in BSD label: it isn't entirely within the slice
wd0: start 82368, end 833663, size 751296
wd0d: start 0, end 833663, size 833664
wd0: rejecting partition in BSD label: it isn't entirely within the slice
wd0e: start 52, end 82367, size 82316
WARNING: / was not properly dismounted.
PCM device 1 not installed.

        I do not speak for the Worker's Compensation Board of Queensland -
                     They don't pay me enough for that!




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199508010606.GAA13927>