From owner-freebsd-uboot@freebsd.org Sat Oct 26 18:57:23 2019 Return-Path: Delivered-To: freebsd-uboot@mailman.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.nyi.freebsd.org (Postfix) with ESMTP id 74B9A17D833 for ; Sat, 26 Oct 2019 18:57:23 +0000 (UTC) (envelope-from gdotten@gmail.com) Received: from mail-qt1-x844.google.com (mail-qt1-x844.google.com [IPv6:2607:f8b0:4864:20::844]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) server-signature RSA-PSS (4096 bits) client-signature RSA-PSS (2048 bits) client-digest SHA256) (Client CN "smtp.gmail.com", Issuer "GTS CA 1O1" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 470qwf5KvVz4WJF for ; Sat, 26 Oct 2019 18:57:22 +0000 (UTC) (envelope-from gdotten@gmail.com) Received: by mail-qt1-x844.google.com with SMTP id y39so3118752qty.0 for ; Sat, 26 Oct 2019 11:57:22 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:references:in-reply-to:from:date:message-id:subject:to :cc; bh=hyBwFt7F/d6oVvVp4q4lZ8I5rmkm4J1MvsXCKK0C+bA=; b=KD5eV+FLwXLL4SU1hivM2gyC/rdU5Rnjc0L+OYViSnrYAqMngI5t0V/re5s40c4dCL r/x/vV3Cd3kehHreEQwcmGPaz3ZH9P93u9P4RzCHdlTjazc8pSPG8dLZgs7dBG6ZYfCz 1/KS1uz2y6zfwG4CN7At6rdFF8d/KStqTrrEj1o9wpEI8rXgIXqdG9U7dxFquuGvBNHG bqs3BPV8uRFDkqsrAi3SbaaxUV8dCbBQueIgH1WYgpp+f2U/NhI4uatpyKeIHr80qEmO hztF7Ma7OKsKoVbKspBfPRRUKu4+tyVwl23m05MpA9EA1zTmn3kzjluenkDZ6KRBvuYe /qzA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:references:in-reply-to:from:date :message-id:subject:to:cc; bh=hyBwFt7F/d6oVvVp4q4lZ8I5rmkm4J1MvsXCKK0C+bA=; b=WQMmL27KtMrwUMY3GPMIXePhyE7BF0satsv6h3pyIftAaDy2V3CtJNlkGVpFt0nkpf cp+ROpS+zLxcDwy1haZblwOPHrhNDC1HzrzOmrOQ72kB1bvPidKQWJiB3jD5Y6Pe25ZV 9w9zXAApK/SEkQkCB5/aaYkBLZgh/cAG1HfdM2eK2LwIbT5ICEZTqxpRJyJAna8X9is1 367ktFNtX/330A3bK1KAyHezMh+Z58uSQvWQY9kSnt8AHcQVZGWT1yFHmf9fPQebOdgp cbyzi53n37WNlk9GmDZPqhQMOor64/7QE0POoiv3Ne41bnXaACeyhKUBtSGqRhF0OnZX KXTA== X-Gm-Message-State: APjAAAV+fl2X6V1id/EwtUIQGSEdimLcprjHbD0pCh9txivJVNjpcLIo dHOGS1oeTGPVN4Dpme3MCdF5Sl1Uxl0SHUIqv5xEJg== X-Google-Smtp-Source: APXvYqzUHGTH8Kevdomc4vOeAVgMDGxrZu4gUeu66UkRWWKGQ93JCPoaupkcZu8411rPMCGaVfqpIf4gFu9RG9Sgfq8= X-Received: by 2002:ac8:70c4:: with SMTP id g4mr9789803qtp.136.1572116241304; Sat, 26 Oct 2019 11:57:21 -0700 (PDT) MIME-Version: 1.0 References: <20191025101832.2b442ecdbf10b68edd7a78ea@bidouilliste.com> <20191026195033.c76686d77b75388cadf27d63@bidouilliste.com> In-Reply-To: From: Gary Otten Date: Sat, 26 Oct 2019 14:48:50 -0400 Message-ID: Subject: Re: u-boot-a64-olinuxino difference between U-Boot SPL 2019.10 & U-Boot SPL 2019.07 To: Emmanuel Vadot Cc: freebsd-uboot@freebsd.org X-Rspamd-Queue-Id: 470qwf5KvVz4WJF X-Spamd-Bar: -- Authentication-Results: mx1.freebsd.org; dkim=pass header.d=gmail.com header.s=20161025 header.b=KD5eV+FL; dmarc=pass (policy=none) header.from=gmail.com; spf=pass (mx1.freebsd.org: domain of gdotten@gmail.com designates 2607:f8b0:4864:20::844 as permitted sender) smtp.mailfrom=gdotten@gmail.com X-Spamd-Result: default: False [-3.00 / 15.00]; ARC_NA(0.00)[]; NEURAL_HAM_MEDIUM(-1.00)[-1.000,0]; R_DKIM_ALLOW(-0.20)[gmail.com:s=20161025]; FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[]; R_SPF_ALLOW(-0.20)[+ip6:2607:f8b0:4000::/36:c]; FREEMAIL_FROM(0.00)[gmail.com]; MIME_GOOD(-0.10)[multipart/alternative,text/plain]; PREVIOUSLY_DELIVERED(0.00)[freebsd-uboot@freebsd.org]; NEURAL_HAM_LONG(-1.00)[-1.000,0]; IP_SCORE_FREEMAIL(0.00)[]; TO_MATCH_ENVRCPT_SOME(0.00)[]; DKIM_TRACE(0.00)[gmail.com:+]; RCPT_COUNT_TWO(0.00)[2]; RCVD_IN_DNSWL_NONE(0.00)[4.4.8.0.0.0.0.0.0.0.0.0.0.0.0.0.0.2.0.0.4.6.8.4.0.b.8.f.7.0.6.2.list.dnswl.org : 127.0.5.0]; DMARC_POLICY_ALLOW(-0.50)[gmail.com,none]; IP_SCORE(0.00)[ip: (2.47), ipnet: 2607:f8b0::/32(-2.40), asn: 15169(-2.05), country: US(-0.05)]; FROM_EQ_ENVFROM(0.00)[]; MIME_TRACE(0.00)[0:+,1:+,2:~]; FREEMAIL_ENVFROM(0.00)[gmail.com]; ASN(0.00)[asn:15169, ipnet:2607:f8b0::/32, country:US]; RCVD_COUNT_TWO(0.00)[2]; RCVD_TLS_ALL(0.00)[]; DWL_DNSWL_NONE(0.00)[gmail.com.dwl.dnswl.org : 127.0.5.0] Content-Type: text/plain; charset="UTF-8" X-Content-Filtered-By: Mailman/MimeDel 2.1.29 X-BeenThere: freebsd-uboot@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Discussions about the use of uboot with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 26 Oct 2019 18:57:23 -0000 After further consideration that wouldn't make sense, the only thing I get out of the u-boot build process is u-boot-sunxi-with-spl.bin On Sat, Oct 26, 2019 at 2:26 PM Gary Otten wrote: > I am working on getting all the gpios on the Olimex a64 board working. You > responded to that post as well, Thanks. You said I have to change the > overlay to turn on a voltage regulator. So I did recently build uboot from > the source. Perhaps that would be a different version, if it rebuilds > loader.efi? > > On Sat, Oct 26, 2019 at 1:50 PM Emmanuel Vadot > wrote: > >> On Sat, 26 Oct 2019 13:30:46 -0400 >> Gary Otten wrote: >> >> > I placed the file loader.efi in the /efi/boot/ directory , uboot didn't >> > appear to find it. I also renamed loader.efi to bootaa64.efi. Results >> > for both attempts are below. >> > >> > loader.efi placed in /efi/boot/ >> > *************************************************************** >> > U-Boot SPL 2019.10 (Oct 22 2019 - 12:39:22 -0400) >> > DRAM: 1024 MiB >> > Trying to boot from MMC1 >> > NOTICE: BL31: v2.1(release): >> > NOTICE: BL31: Built : 10:11:05, Oct 20 2019 >> > NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) >> > NOTICE: BL31: Found U-Boot DTB at 0x408c458, model: Olimex >> A64-Olinuxino >> > NOTICE: BL31: PMIC: Detected AXP803 on RSB. >> > >> > >> > U-Boot 2019.10 (Oct 22 2019 - 12:39:22 -0400) Allwinner Technology >> > >> > CPU: Allwinner A64 (SUN50I) >> > Model: Olimex A64-Olinuxino >> > DRAM: 1 GiB >> > MMC: mmc@1c0f000: 0, mmc@1c10000: 1 >> > Loading Environment from FAT... Card did not respond to voltage select! >> > In: serial >> > Out: serial >> > Err: serial >> > Net: phy interface7 >> > eth0: ethernet@1c30000 >> > starting USB... >> > Bus usb@1c1a000: USB EHCI 1.00 >> > Bus usb@1c1a400: USB OHCI 1.0 >> > Bus usb@1c1b000: USB EHCI 1.00 >> > Bus usb@1c1b400: USB OHCI 1.0 >> > scanning bus usb@1c1a000 for devices... 1 USB Device(s) found >> > scanning bus usb@1c1a400 for devices... 1 USB Device(s) found >> > scanning bus usb@1c1b000 for devices... 1 USB Device(s) found >> > scanning bus usb@1c1b400 for devices... 1 USB Device(s) found >> > scanning usb for storage devices... 0 Storage Device(s) found >> > Hit any key to stop autoboot: 0 >> > switch to partitions #0, OK >> > mmc0 is current device >> > Scanning mmc 0:1... >> > 32443 bytes read in 8 ms (3.9 MiB/s) >> > Card did not respond to voltage select! >> > >> > Device 0: unknown device >> > ethernet@1c30000 Waiting for PHY auto negotiation to complete......... >> > TIMEOUT ! >> > BOOTP broadcast 1 >> > >> > >> > >> > I renamed loader.efi to bootaa64.efi, the result is below placed in >> > /efi/boot/ >> > ********************************************************************** >> > >> > U-Boot SPL 2019.10 (Oct 22 2019 - 12:39:22 -0400) >> > DRAM: 1024 MiB >> > Trying to boot from MMC1 >> > NOTICE: BL31: v2.1(release): >> > NOTICE: BL31: Built : 10:11:05, Oct 20 2019 >> > NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) >> > NOTICE: BL31: Found U-Boot DTB at 0x408c458, model: Olimex >> A64-Olinuxino >> > NOTICE: BL31: PMIC: Detected AXP803 on RSB. >> > >> > >> > U-Boot 2019.10 (Oct 22 2019 - 12:39:22 -0400) Allwinner Technology >> > >> > CPU: Allwinner A64 (SUN50I) >> > Model: Olimex A64-Olinuxino >> > DRAM: 1 GiB >> > MMC: mmc@1c0f000: 0, mmc@1c10000: 1 >> > Loading Environment from FAT... Card did not respond to voltage select! >> > In: serial >> > Out: serial >> > Err: serial >> > Net: phy interface7 >> > eth0: ethernet@1c30000 >> > starting USB... >> > Bus usb@1c1a000: USB EHCI 1.00 >> > Bus usb@1c1a400: USB OHCI 1.0 >> > Bus usb@1c1b000: USB EHCI 1.00 >> > Bus usb@1c1b400: USB OHCI 1.0 >> > scanning bus usb@1c1a000 for devices... 1 USB Device(s) found >> > scanning bus usb@1c1a400 for devices... 1 USB Device(s) found >> > scanning bus usb@1c1b000 for devices... 1 USB Device(s) found >> > scanning bus usb@1c1b400 for devices... 1 USB Device(s) found >> > scanning usb for storage devices... 0 Storage Device(s) found >> > Hit any key to stop autoboot: 0 >> > switch to partitions #0, OK >> > mmc0 is current device >> > Scanning mmc 0:1... >> > 32443 bytes read in 8 ms (3.9 MiB/s) >> > Found EFI removable media binary efi/boot/bootaa64.efi >> > Scanning disk mmc@1c0f000.blk... >> > Card did not respond to voltage select! >> > Scanning disk mmc@1c10000.blk... >> > Disk mmc@1c10000.blk not ready >> > Found 3 disks >> > BootOrder not defined >> > EFI boot manager: Cannot load any image >> > 607648 bytes read in 34 ms (17 MiB/s) >> > Consoles: EFI console >> > efipart_readwrite: rw=1, blk=0 size=1 status=2 >> > efipart_readwrite: rw=1, blk=64 size=1 status=2 >> > efipart_readwrite: rw=1, blk=1 size=1 status=2 >> > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 >> > efipart_readwrite: rw=1, blk=0 size=1 status=2 >> > efipart_readwrite: rw=1, blk=64 size=1 status=2 >> > efipart_readwrite: rw=1, blk=1 size=1 status=2 >> > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 >> > FreeBSD/arm64 EFI loader, Revision 1.1 >> > >> > Command line arguments: loader.efi >> > EFI version: 2.80 >> > EFI Firmware: Das U-Boot (rev 8217.4096) >> > Console: efi (0) >> > Load Path: /efi\boot\bootaa64.efi >> > Load Device: >> > >> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000) >> > Trying ESP: >> > >> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000) >> > Setting currdev to disk0p1: >> > efipart_readwrite: rw=1, blk=0 size=1 status=2 >> > efipart_readwrite: rw=1, blk=64 size=1 status=2 >> > efipart_readwrite: rw=1, blk=1 size=1 status=2 >> > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 >> > efipart_readwrite: rw=1, blk=0 size=1 status=2 >> > efipart_readwrite: rw=1, blk=64 size=1 status=2 >> > efipart_readwrite: rw=1, blk=1 size=1 status=2 >> > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 >> > Trying: >> > >> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x64800,0x1c93800) >> > Setting currdev to disk0p2: >> > efipart_readwrite: rw=1, blk=0 size=1 status=2 >> > efipart_readwrite: rw=1, blk=64 size=1 status=2 >> > efipart_readwrite: rw=1, blk=1 size=1 status=2 >> > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 >> > efipart_readwrite: rw=1, blk=0 size=1 status=2 >> > efipart_readwrite: rw=1, blk=64 size=1 status=2 >> > efipart_readwrite: rw=1, blk=1 size=1 status=2 >> > efipart_readwrite: rw=1, blk=30375936 size=1 status=2 >> > Failed to find bootable partition >> > ## Application terminated, r = 14 in 1 seconds >> > EFI LOAD FAILED: continuing... >> > Card did not respond to voltage select! >> > >> > Device 0: unknown device >> > ethernet@1c30000 Waiting for PHY auto negotiation to complete....... >> >> When was this loader.efi built ? >> All the needed commits have made the 12-stable and 12.1 branch so you >> shouldn't have this problem. >> >> > On Fri, Oct 25, 2019 at 4:18 AM Emmanuel Vadot >> > wrote: >> > >> > > >> > > Hi Gary, >> > > >> > > On Thu, 24 Oct 2019 19:37:48 -0400 >> > > Gary Otten wrote: >> > > >> > > > The 2019.10 u-boot I compiled with with the a64-olinuxino_defconfig >> > > > configuration doesn't find the UFS partition the old one 2019.07 >> that is >> > > in >> > > > the ports pre-compiled does. Is there a configuration setting that >> I >> > > must >> > > > set before compiling? Or did I overlook something else? Is my SD >> card >> > > > layout appropriate, or causing the problem? >> > > > >> > > > >> > > >> *********************************************************************************** >> > > > U-Boot SPL 2019.07 (from the pre-made package) (this works) >> > > > (partial bootup txt) >> > > > >> > > > Initializing modules: ZFS UFS >> > > > Load Path: /efi\boot\bootaa64.efi >> > > > Load Device: >> > > > >> > > >> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000) >> > > > Probing 3 block devices.....* done >> > > > ZFS found no pools >> > > > UFS found 1 partition >> > > > Consoles: EFI console >> > > > FreeBSD/arm64 EFI loader, Revision 1.1 >> > > > >> > > > Command line arguments: loader.efi >> > > > EFI version: 2.70 >> > > > EFI Firmware: Das U-Boot (rev 8217.1792) >> > > > Console: efi (0) >> > > > Load Device: >> > > > >> > > >> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x96800,0x1c8b800) >> > > > Trying ESP: >> > > > >> > > >> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x96800,0x1c8b800) >> > > > Setting currdev to disk0p2: >> > > > Loading /boot/defaults/loader.conf >> > > > Loading /boot/device.hints >> > > > Loading /boot/loader.conf >> > > > Loading /boot/loader.conf.local >> > > > - >> > > > Loading kernel... >> > > > >> > > > >> > > >> ******************************************************************************* >> > > > >> > > > >> > > > U-Boot SPL 2019.10 (Compiled by myself) >> > > > (partial bootup txt) >> > > > >> > > > Initializing modules: ZFS UFS >> > > > Load Path: /efi\boot\bootaa64.efi >> > > > Load Device: >> > > > >> > > >> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x800,0x64000) >> > > > Probing 3 block devices...... done >> > > > ZFS found no pools >> > > > UFS found no partitions >> > > > Failed to load '/boot/loader.efi' >> > > > panic: No bootable partitions found! >> > > > ## Application terminated, r = 1 >> > > > EFI LOAD FAILED: continuing... >> > > > Card did not respond to voltage select! >> > > > Device 0: unknown device >> > > > ethernet@1c30000 Waiting for PHY auto negotiation to >> complete......... >> > > > TIMEOUT ! >> > > > BOOTP broadcast 1 >> > > > BOOTP broadcast 2 >> > > > BOOTP broadcast 3 >> > > > >> > > >> **************************************************************************************************** >> > > > My SD card layout. >> > > > >> > > > da2 MBR (15G) >> > > > free (993k) >> > > > 1 efi (200M) >> > > > free (100M) >> > > > 2 freebsd (active) (14G) >> > > > >> > > > >> > > > da2s2 BSD (14G) >> > > > 1 freebsd-ufs (14G) >> > > > _______________________________________________ >> > > > freebsd-uboot@freebsd.org mailing list >> > > > https://lists.freebsd.org/mailman/listinfo/freebsd-uboot >> > > > To unsubscribe, send any mail to " >> freebsd-uboot-unsubscribe@freebsd.org" >> > > >> > > You are using boot1.efi as EFI/BOOT/BOOTAA64.EFI while you should use >> > > loader.efi directly. >> > > U-Boot 2019.10 changed some stuff related to alignement for IO and >> > > only loader.efi was updated to cope with this changed. >> > > boot1.efi was never really supported on aarch64. >> > > >> > > Cheers, >> > > >> > > -- >> > > Emmanuel Vadot >> > > >> > _______________________________________________ >> > freebsd-uboot@freebsd.org mailing list >> > https://lists.freebsd.org/mailman/listinfo/freebsd-uboot >> > To unsubscribe, send any mail to "freebsd-uboot-unsubscribe@freebsd.org >> " >> >> >> -- >> Emmanuel Vadot >> >