Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 02 Feb 2006 06:07:05 -0700
From:      Scott Long <scottl@samsco.org>
To:        Michal Mertl <mime@traveller.cz>
Cc:        freebsd-current@freebsd.org
Subject:   Re: em(4) stops forwarding
Message-ID:  <43E203F9.9060307@samsco.org>
In-Reply-To: <1138875351.1807.12.camel@genius.i.cz>
References:  <1138813174.1358.34.camel@genius.i.cz>	 <43E0FE09.50804@samsco.org> <1138875351.1807.12.camel@genius.i.cz>

next in thread | previous in thread | raw e-mail | index | archive | help
Michal Mertl wrote:
> Scott Long wrote:
> 
>>Michal Mertl wrote:
>>
>>>Hello,
>>>
>>>I've been running CURRENT for long time and never experienced problem
>>>with the built-in em(4) card before. Recently (I first noticed it on Jan
>>>24) the card has stopped working several times. Nothing gets into the
>>>log file. Carrier is still detected properly but no data is exchanged.
>>>Ifconfig up/down doesn't help but kldunload/load does. When I run
>>>tcpdump I don't see any packet coming in but I see some outgoing.
>>>
>>>Can someone suggest what to look at when it happens the next time? I
>>>have DDB compiled in. I will try to sniff the wire using another machine
>>>next time to see if the card sends out anything.
>>>
>>>The command 'pciconf -lv' says about the card this:
>>>em0@pci2:1:0:   class=0x020000 card=0x05491014 chip=0x101e8086 rev=0x03
>>>hdr=0x00
>>>    vendor   = 'Intel Corporation'
>>>    device   = '82540EP Gigabit Ethernet Controller (Mobile)'
>>>    class    = network
>>>    subclass = ethernet
>>>
>>>The dmesg:
>>>em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
>>>0x8000-0x803f mem 0xc0220000-0xc023ffff,0xc0200000-0xc020ffff irq 11 at
>>>device 1.0 on pci2
>>>em0: Ethernet address: 00:0d:60:cd:ae:e2
>>>em0: [FAST]
>>>
>>>The interrupt is shared since the machine is a notebook. I don't know if
>>>it was just a coincidence but I think that it happened at the same time
>>>as my USB mouse stopped working - the USB controller is on the same irq.
>>>
>>>Michal
>>>
>>
>>What is sharing the interrupt?
> 
> 
> vgapci0, ipw0, ehci0, uhci0-2. I don't think vgapci0 and ipw0 are really
> using the interrupt when I use em0.
> 
> 

Ouch.  For now, edit /sys/dev/em/if_em.c and add the following line to 
the top of the file:

#define NO_EM_FASTINTR

Also, does your kernel config include the apic device?

Scott




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43E203F9.9060307>