Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 19 Apr 2012 17:31:51 -0700
From:      matt <sendtomatt@gmail.com>
To:        Erich Dollansky <erichfreebsdlist@ovitrap.com>
Cc:        freebsd-current@freebsd.org
Subject:   Re: Status on X220
Message-ID:  <4F90AE77.2020408@gmail.com>
In-Reply-To: <201204200701.08507.erichfreebsdlist@ovitrap.com>
References:  <201204200701.08507.erichfreebsdlist@ovitrap.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On 04/19/12 17:01, Erich Dollansky wrote:
> Hi,
>
> there are so many different news about the X220 here that it is not so clear to me whether an install will result in a usable system.
>
> If everything works fine, there should be one for me tomorrow ready to get FreeBSD. My plan is to start with a plain 9.0 installation and upgrade it then to 10.0 before installing any ports.
>
> All I saw from the list is that 10.0 is the best option to get a usable system.
>
> Is there a better option?
>
> Erich
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
>
That's what I've been using. I'm about ready to say goodbye to gentoo 
permanently on mine, although it's a work machine so I'm taking my time.
*
*What works:
suspend/resume (must use Xorg KMS to have display on resume), needs 
sysctl twiddling for PCI resume/suspend
backlight (via hack for now)
keyboard (needs sed -e 's/IBM0068/LEN0068/g' on acpi_ibm.c, or nicer 
patch as circulated in the past)
trackpad (could be better, no scrolling yet...psm doesn't seem to attach 
synaptics properly)
ethernet
intel wireless (no rt8192)
graphics (via Konstantin's KMS work! thanks!)
speaker.ko!
Fan control works, but stops displaying fan speed sometimes (see hack 
for acpi_ibm.c)
Expresscard
Turbocore
Powerd/Cpufreq
VESA modes for syscons (1024x768 looks fine)
*
*What is unknown (to me):
Card reader
Fingerprint for PAM (works if you already registered it in Windows for boot)
Sound (just haven't tried it probably ok it's HDA Connexant)
DPMS
WWAN


What doesn't work:
Standard consoles after X is started with KMS (this is true for all 
intel KMS)
Display after resume (unless you use KMS/Xorg)
Power saving...I'm still using more power than I'd like with KMS loaded 
for now
Random miniPCIe cards in second slot...this is BIOS problem I assume
Scrolling with psm and/or xf86-input-synaptics

I'm probably forgetting some stuff that doens't work and some stuff that 
does (especially if obvious)

Matt



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F90AE77.2020408>