Date: Wed, 7 Apr 1999 15:28:49 +0000 ( ) From: Michael Nelson <nelson@seahunt.imat.com> To: dledford@redhat.com Cc: linux-scsi@vger.rutgers.edu, aic7xxx@FreeBSD.ORG, linux-kernel@vger.rutgers.edu Subject: Re: aic7xxx driver update Message-ID: <199904071528.IAA07140@seahunt.imat.com> In-Reply-To: <370B7289.2C70ADC7@redhat.com>
next in thread | previous in thread | raw e-mail | index | archive | help
-> -> I uploaded the original files after midnight local time which means that -> they didn't get mirrored until midnight last night. Sorry about that, -> they should be there now. I got it this morning. Unfortunately, although the stock 5.1.10 driver in 2.2.5 works fine with my hardware, the 5.1.14 blows up during boot with scsi timeouts and reset errors. Then it panics and that's all she wrote. I have two host adapters: Adaptec AHA-294X Ultra2 SCSI host adapter Ultra2-LVD/SE Wide Controller Adaptec AHA-294X Ultra SCSI host adapter Ultra Narrow Controller ...and three scsi devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: DRVS09V Rev: 00F0 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: QUANTUM Model: VIKING 2.3 NSE Rev: 8808 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 04 Lun: 00 Vendor: ARCHIVE Model: Python 28388-XXX Rev: 5.45 Type: Sequential-Access ANSI SCSI revision: 02 Back to 5.1.10 and all is fine. Michael -- Michael Nelson San Francisco, CA nelson@imat.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199904071528.IAA07140>