Date: Sun, 13 May 2001 11:24:06 -0700 From: "Kulraj Gurm (bosa.ca Account)" <kulraj@bosa.ca> To: "Kulraj Gurm (bosa.ca Account)" <kulraj@bosa.ca>, <freebsd-stable@freebsd.org> Subject: Re : Make buildworld fails Message-ID: <004d01c0dbd9$e5be1600$64c8a8c0@kimsamy.com>
next in thread | raw e-mail | index | archive | help
Is there anywhere I could cross reference what these error codes mean/
*** Error code 126
*** Error code 1
Thnx again,
Kulraj
----- Original Message -----
From: "Kulraj Gurm (bosa.ca Account)" <kulraj@bosa.ca>
To: <freebsd-stable@freebsd.org>
Sent: Sunday, May 13, 2001 9:14 AM
Subject: Make buildworld fails - possible hardware problem?
> Updated source tree yesterday and running make buildword fails as follows;
> previous version 4.2 RELEASE - had no problems. I suspect hardware problem
> but have no idea where to look or what component to blame.
> The CPU is running at spec. not overclocked - original AMD Athlon 500MHz
> (not t'bird) running at an acceptable temp. 42 C. 128Mb PC100 SDRAM -
> already tried different RAM. IDE Fujitsu 30Gb HDD.
>
> -------------------------------
>
>
> (cd /usr/src/sys/boot/i386/btx/btx; m4 btx.s) | as --defsym
> BTX_FLAGS=0x0 -o btx.o
> {standard input}: Assembler messages:
> {standard input}:527: Warning: stand-alone `data16' prefix
> {standard input}:544: Warning: stand-alone `data16' prefix
> ld -N -e start -Ttext 0x9000 -o btx.out btx.o
> objcopy -S -O binary btx.out btx
> ===> sys/boot/i386/btx/btxldr
> (cd /usr/src/sys/boot/i386/btx/btxldr; m4 -DLOADER_ADDRESS=0x200000
> btxldr.s ) | as -o btxldr.o
> ld -N -e start -Ttext 0x200000 -o btxldr.out btxldr.o
> objcopy -S -O binary btxldr.out btxldr
> ===> sys/boot/i386/btx/lib
> as -elf -o btxcsu.o /usr/src/sys/boot/i386/btx/lib/btxcsu.s
> as -elf -o btxsys.o /usr/src/sys/boot/i386/btx/lib/btxsys.s
> as -elf -o btxv86.o /usr/src/sys/boot/i386/btx/lib/btxv86.s
> ld -elf -i -o crt0.o btxcsu.o btxsys.o btxv86.o
> ===> sys/boot/i386/boot2
> as --defsym FLAGS=0x80 /usr/src/sys/boot/i386/boot2/boot1.s -o boot1.o
> ld -nostdlib -static -N -e start -Ttext 0x7c00 -o boot1.out boot1.o
> objcopy -S -O binary boot1.out boot1
> dd if=/dev/zero of=boot2.ldr bs=512 count=1 2>/dev/null
> *** Error code 126
>
> Stop in /usr/src/sys/boot/i386/boot2.
> *** Error code 1
>
> Stop in /usr/src/sys/boot/i386.
> *** Error code 1
>
> Stop in /usr/src/sys/boot.
> *** Error code 1
>
> Stop in /usr/src/sys.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
>
> -----------------------------
>
> Any help gratefully appreciated.
>
> Regards,
>
> Kulraj Gurm
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004d01c0dbd9$e5be1600$64c8a8c0>