Date: Mon, 11 Aug 2003 09:59:41 +0200 From: "Tommy Eriksen" <tommy@a38.dk> To: <freebsd-hardware@freebsd.org> Subject: Problems with Intel SE7500WV2 Message-ID: <E9953D51CA5B4C489350AA9E7F49840742982C@rushhour.lynge.moduleweb.net>
next in thread | raw e-mail | index | archive | help
Hi, I've got an Intel SE7500WV2 in a SR1200 chassis with 2 Xeon 2.4GHz, 2GB of ECC RAM and 2 Maxtor Maxtor 6E040L0/NAR61590. The system installs fine, but when booting it afterwards I first get a couple of error-messages from the disks ("ad4: UDMA ICRC error reading fsbn 43327 of 0-119 (ad4 bn 43327; cn 42 tn 15 sn 46) retrying" after which it falls back to PIO-mode), and then, when trying to transfer data over the network (it has 2 em-cards onboard), I get errors in the transfers. I replaced the board with a new one from Intel thinking it was the board having errors. I get the errors with both 4.8-RELEASE and 5.1-RELEASE. I've tried googling a bit but haven't really seen any posts about other folks having these problems. I've got an identical machine running - it displays the same ATA-errors but on that one, I can put the disks back in UDMA133-mode with atacontrol and then all is well untill next reboot. Not really an "elegant" solution, but I had to get that one running quickly. My first thought after installing the machine and seeing the erorrs was to try to cvsup to a later version, but when trying to fetch cvsup I get: # fetch <url>/cvsup-16.1e.tgz && pkg_add cvsup-16.1e.tgz Receiving cvsup-16.1e.tgz (2148280 bytes): 100% 2148280 bytes transferred in 10.0 seconds (209.47 kBps) tar: Skipping to next header tar: Archive contains obsolescent base-64 headers gzip: stdin: invalid compressed data--format violated tar: Child returned status 1 tar: Error exit delayed from previous errors pkg_add: tar extract of /root/cvsup-16.1e.tgz failed! pkg_add: unable to extract '/root/cvsup-16.1e.tgz'! -and dmesg logs: NMI ISA 20, EISA 4 NMI ISA 20, EISA 4 NMI ISA 30, EISA 4 If trying to SCP the package to the machine I get: # scp cvsup-16.1e.tgz 192.168.24.241: Password: cvsup-16.1e.tgz 0% | | 0 --:-- ETAReceived disconnect from 192.168.24.241: 2: Corrupted MAC on input. lost connection -And once again, dmesg logs: NMI ISA 20, EISA 4 Verbose dmesg-output follows: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 GMT 2003 root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC Calibrating clock(s) ... TSC clock: 2392260160 Hz, i8254 clock: 1193171 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.29-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 2147418112 (2097088K bytes) Physical memory chunk(s): 0x00001000 - 0x0009cfff, 638976 bytes (156 pages) 0x00544000 - 0x7ffe7fff, 2141863936 bytes (522916 pages) avail memory = 2086408192 (2037508K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fdb50 bios32: Entry = 0xfdb64 (c00fdb64) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xdb85 pnpbios: Found PnP BIOS data at 0xc00f2ac0 pnpbios: Entry = f0000:237f Rev = 1.0 Other BIOS signatures found: ACPI: 000ff9b0 Preloaded elf kernel "kernel" at 0xc051d000. Pentium Pro MTRR support enabled Creating DISK md0 md0: Malloc disk Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=254c8086) Using $PIR table, 19 entries at 0xc00f2f90 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x254c, revid=0x01 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x2541, revid=0x01 class=ff-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x2545, revid=0x01 class=06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=4 secondarybus=2 found-> vendor=0x8086, dev=0x2546, revid=0x01 class=ff-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x244e, revid=0x42 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x2480, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x248b, revid=0x02 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=0 map[10]: type 1, range 32, base 00000000, size 3 map[14]: type 1, range 32, base 00000000, size 2 map[18]: type 1, range 32, base 00000000, size 3 map[1c]: type 1, range 32, base 00000000, size 2 map[20]: type 1, range 32, base 000003a0, size 4 found-> vendor=0x8086, dev=0x2483, revid=0x02 class=0c-05-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=0 map[20]: type 1, range 32, base 00000580, size 5 pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1 pcib1: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0 found-> vendor=0x8086, dev=0x1461, revid=0x04 class=08-00-20, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base feae0000, size 12 found-> vendor=0x8086, dev=0x1460, revid=0x04 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=4 secondarybus=4 found-> vendor=0x8086, dev=0x1461, revid=0x04 class=08-00-20, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base feaf0000, size 12 found-> vendor=0x8086, dev=0x1460, revid=0x04 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=3 secondarybus=3 pci2: <PCI bus> on pcib1 pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci2 pci4: <PCI bus> on pcib2 pci2: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci2 found-> vendor=0x8086, dev=0x1010, revid=0x01 class=02-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 64, base fe8a0000, size 17 map[20]: type 1, range 32, base 00002040, size 6 found-> vendor=0x8086, dev=0x1010, revid=0x01 class=02-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=10 map[10]: type 1, range 64, base fe8c0000, size 17 map[20]: type 1, range 32, base 00002000, size 6 pci3: <PCI bus> on pcib3 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0x2040-0x207f mem 0xfe8a0000-0xfe8bffff irq 10 at device 7.0 on pci3 bpf: em0 attached em0: Speed:N/A Duplex:N/A em1: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0x2000-0x203f mem 0xfe8c0000-0xfe8dffff irq 10 at device 7.1 on pci3 using shared irq10. bpf: em1 attached em1: Speed:100 Mbps Duplex:Full pci0: <unknown card> (vendor=0x8086, dev=0x2546) at 3.1 pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 found-> vendor=0x105a, dev=0x7275, revid=0x01 class=01-04-85, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base 00001400, size 3 map[14]: type 3, range 32, base 00001408, size 2 map[18]: type 1, range 32, base 00001410, size 3 map[1c]: type 3, range 32, base 0000140c, size 2 map[20]: type 1, range 32, base 00001420, size 4 map[24]: type 1, range 32, base fe7e0000, size 14 found-> vendor=0x1002, dev=0x4752, revid=0x27 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base fd000000, size 24 map[14]: type 1, range 32, base 00001000, size 8 map[18]: type 1, range 32, base fe7f0000, size 12 pci1: <PCI bus> on pcib4 atapci0: <Promise TX2 ATA133 controller> port 0x1420-0x142f,0x140c-0x140f,0x1410-0x1417,0x1408-0x140b,0x1400-0x1407 mem 0xfe7e0000-0xfe7e3fff irq 9 at device 2.0 on pci1 ata-: ata2 exists, using next available unit number ata2: iobase=0x1400 altiobase=0x140a bmaddr=0x1420 ata2: mask=03 ostat0=50 ostat2=00 ata2-master: ATAPI 00 00 ata2-slave: ATAPI 00 00 ata2: mask=03 stat0=50 stat1=00 ata2-master: ATA 01 a5 ata2: devices=01 ata2: at 0x1400 on atapci0 ata3: iobase=0x1410 altiobase=0x140e bmaddr=0x1428 ata3: mask=03 ostat0=50 ostat2=00 ata3-master: ATAPI 00 00 ata3-slave: ATAPI 00 00 ata3: mask=03 stat0=50 stat1=00 ata3-master: ATA 01 a5 ata3: devices=01 ata3: at 0x1410 on atapci0 using shared irq9. pci1: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 12.0 irq 11 isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH3 ATA100 controller> port 0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x03a0 ata0: mask=03 ostat0=00 ostat2=00 ata0-master: ATAPI 74 74 ata0-slave: ATAPI 74 74 ata0: mask=03 stat0=74 stat1=74 ata0: devices=00 ata0: at 0x1f0 irq 14 on atapci1 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x03a8 ata1: mask=03 ostat0=50 ostat2=7f ata1-master: ATAPI 14 eb ata1-slave: ATAPI 7f 7f ata1: mask=03 stat0=00 stat1=7f ata1-slave: ATA 7f 7f ata1: devices=04 ata1: at 0x170 irq 15 on atapci1 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0 ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xd17ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata4 failed to probe at port 0x1f0 irq 14 on isa0 ata5 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe on isa0 bt0: Failed Status Reg Test - 80 bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - 0 bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed 80 aha0: status reg test failed 0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) cs0: not probed (disabled) sn0: not probed (disabled) isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: faith0 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c240, tty 63001a, net 67041a bpf: sl0 attached ad4: success setting UDMA6 on Promise chip Creating DISK ad4 ad6: success setting UDMA6 on Promise chip Creating DISK ad6 Creating DISK ar0 ar0: 39205MB <ATA RAID1 array> [4998/255/63] status: READY subdisks: 0 READY ad6: <Maxtor 6E040L0/NAR61590> ATA-7 disk at ata3-master ad6: 39205MB (80293248 sectors), 79656 C, 16 H, 63 S, 512 B ad6: 16 secs/int, 1 depth queue, UDMA133 ad6: piomode=4 dmamode=2 udmamode=6 cblid=1 1 READY ad4: <Maxtor 6E040L0/NAR61590> ATA-7 disk at ata2-master ad4: 39205MB (80293248 sectors), 79656 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, UDMA133 ad4: piomode=4 dmamode=2 udmamode=6 cblid=1 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <SAMSUNG CD-ROM SN-124/QM15> CDROM drive at ata1 as master acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Mounting root from ufs:/dev/ar0s1a ar0s1: type 0xa5, start 63, end = 80292869, size 80292807 : OK start_init: trying /sbin/init ad4: UDMA ICRC error reading fsbn 43327 of 0-119 (ad4 bn 43327; cn 42 tn 15 sn 46) retrying ad4: UDMA ICRC error reading fsbn 43327 of 0-119 (ad4 bn 43327; cn 42 tn 15 sn 46) retrying ad4: UDMA ICRC error reading fsbn 42967 of 0-103 (ad4 bn 42967; cn 42 tn 10 sn 1) retrying ad4: UDMA ICRC error reading fsbn 42967 of 0-103 (ad4 bn 42967; cn 42 tn 10 sn 1) retrying ad4: UDMA ICRC error reading fsbn 42967 of 0-103 (ad4 bn 42967; cn 42 tn 10 sn 1) retrying ad4: UDMA ICRC error reading fsbn 42967 of 0-103 (ad4 bn 42967; cn 42 tn 10 sn 1)ad4: success setting PIO4 on generic chip falling back to PIO mode ad6: UDMA ICRC error reading fsbn 383 of 0-31 (ad6 bn 383; cn 0 tn 6 sn 5) retrying _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E9953D51CA5B4C489350AA9E7F49840742982C>