Date: Mon, 24 Jun 2002 09:40:09 +0200 From: thrawn@linux.nu (Mattias Björk) To: freebsd-questions@freebsd.org Subject: TV-Card problem with sound Message-ID: <3d16ccd9115fe1.32604773@not right>
next in thread | raw e-mail | index | archive | help
Hi,
I have a terra tech value card, And it is working fine except the sound of it. So i wounder if anybody can help me fix this problem. Here is sysctl -a | grep bt:
hw.bt848.card: -1
hw.bt848.tuner: -1
hw.bt848.reverse_mute: -1
hw.bt848.format: -1
hw.bt848.slow_msp_audio: -1
It might be a simple problem but I have tryed mixing with the mixer, but I coulden't get it make a sound. Here is my dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #1: Sun Jun 16 18:59:40 CEST 2002
root@:/usr/src/sys/compile/THRAWN
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1410348801 Hz
CPU: AMD Athlon(tm) XP 1600+ (1410.35-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
real memory = 536870912 (524288K bytes)
avail memory = 518516736 (506364K bytes)
Preloaded elf kernel "kernel" at 0xc03ca000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fdf10
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0201 graphics accelerator> at 0.0 irq 10
sym0: <810a> port 0xd000-0xd0ff mem 0xe3003000-0xe30030ff irq 11 at device 9.0 o
n pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
bktr0: <BrookTree 878> mem 0xe3000000-0xe3000fff irq 7 at device 10.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smb0: <SMBus general purpose I/O> on smbus0
iic0: <I2C general purpose I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb0 master-only
iicsmb1: <I2C to SMB bridge> on iicbus1
smbus1: <System Management Bus> on iicsmb1
smb1: <SMBus general purpose I/O> on smbus1
iic1: <I2C general purpose I/O> on iicbus1
smbus2: <System Management Bus> on bti2c0
smb2: <SMBus general purpose I/O> on smbus2
bktr0: Warning - card vendor 0x15f7 (model 0x1118) unknown.
bktr0: Pinnacle/Miro TV, Philips NTSC tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 10.1 irq 7
pcm0: <AudioPCI ES1370> port 0xd400-0xd43f irq 3 at device 11.0 on pci0
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xd800-0xd87f mem 0xe3002000-0xe3002
07f irq 10 at device 12.0 on pci0
vr0: Ethernet address: 00:80:c8:d5:69:60
miibus0: <MII bus> on vr0
amphy0: <DM9101 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xdc00-0xdc0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
orm0: <Option ROM> at iomem 0xcc000-0xcffff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 12949MB <IBM-DJNA-371350> [26310/16/63] at ata0-master UDMA33
ad3: UDMA ICRC error reading fsbn 14449617 of 0-3 (ad3 bn 14449617; cn 14334 tn
15 sn 0) retrying
ad3: UDMA ICRC error reading fsbn 14449617 of 0-3 (ad3 bn 14449617; cn 14334 tn
15 sn 0) retrying
ad3: UDMA ICRC error reading fsbn 14449617 of 0-3 (ad3 bn 14449617; cn 14334 tn
15 sn 0) retrying
ad3: UDMA ICRC error reading fsbn 14449617 of 0-3 (ad3 bn 14449617; cn 14334 tn
15 sn 0) falling back to PIO mode
ad3: 7055MB <AC35D060AVER07%0> [14335/16/63] at ata1-slave PIO4
acd0: DVD-ROM <MATSHITADVD-ROM SR-8584A> at ata0-slave PIO4
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s3a
cd0 at sym0 bus 0 target 2 lun 0
cd0: <TEAC CD-ROM CD-532S 3.0A> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at sym0 bus 0 target 5 lun 0
cd1: <MATSHITA CD-R CW-7502 4.10> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray c
losed
As you can see im having some problems with my harddisc but that a IBM disc so I guess that is why. Any way that is not the issue, the thing is that I want to get
+sound working with my TV-card.
I hope this is enought info, else I will give it to you.
Thanks in advance.
Mvh Mattias Björk
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3d16ccd9115fe1.32604773>