Date: Sat, 15 Dec 2001 15:56:07 -0500 (EST) From: Sam Drinkard <sam@vortex.wa4phy.net> To: freebsd-stable@freebsd.org Subject: ed0 and dropoff in speed Message-ID: <200112152056.fBFKu7O01268@vortex.wa4phy.net>
next in thread | raw e-mail | index | archive | help
As with j mckitrick, I just noticed ed0 is now ed1. Have also
noticed a significant dropoff in speed since the build of 11
December. Altho I don't have a direct link to test against, the ed
card is being fed from the cable modem. Going from a "normal"
thruput of roughly 1.2 down to about 700k is pretty significant.
Granted network traffic makes a big difference, but a 0400 in the
a.m., it should be fairly quiescent on the east coast. Here's the
output from ifconfig..
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.100.1 netmask 0xffffff00 broadcast 192.168.100.255
ether 00:50:bf:75:18:fb
media: Ethernet autoselect (none)
status: active
ed1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 24.12.79.51 netmask 0xffffff00 broadcast 24.12.79.255
ether 00:80:c8:da:b1:6d
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
and output from dmesg (notice the build string, with "@" instead of a
name..
inet 24.12.79.51 netmask 0xffffff00 broadcast 24.12.79.255
ether 00:80:c8:da:b1:6d
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
and output from dmesg (notice the build string, with "@" instead of a
name.. Also, just noticed the ATI Mach64 card used to be recognized,
now just shows generic VGA??
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #1: Sat Dec 15 02:15:37 EST 2001
@:/usr/src/sys/compile/VORTEX
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 880197580 Hz
CPU: AMD Athlon(tm) Processor (880.20-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 402587648 (393152K bytes)
avail memory = 388526080 (379420K bytes)
Preloaded elf kernel "kernel" at 0xc0330000.
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00f7800
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=8391)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 7.2 irq 5
pci0: <VIA 83C572 USB controller> at 7.3 irq 5
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
pci0: <ATI Mach64-GP graphics accelerator> at 9.0 irq 11
ahc0: <Adaptec 2940 SCSI adapter> port 0xd400-0xd4ff mem 0xdfffe000-0xdfffefff irq 10 at device 12.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs
pcm0: <Creative CT5880-A> port 0xc800-0xc83f irq 10 at device 14.0 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0xc400-0xc4ff mem 0xdfffdf00-0xdfffdfff irq 5 at device 15.0 on pci0
rl0: Ethernet address: 00:50:bf:75:18:fb
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ed1: <D-Link DE-220P PnP ISA Card> at port 0x240-0x25f irq 9 on isa0
ed1: address 00:80:c8:da:b1:6d, type NE2000 (16 bit)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
ad0: 21557MB <IBM-DJNA-372200> [43800/16/63] at ata0-master UDMA66
acd0: CDROM <CREATIVE CD5230E> at ata1-master using PIO4
Waiting 5 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <ARCHIVE 4326XX 27871-XXX 4.AO> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 15)
Mounting root from ufs:/dev/ad0s1a
Sam
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200112152056.fBFKu7O01268>