Date: Fri, 18 Feb 2005 09:50:36 -0700 (MST) From: Scott Long <scottl@freebsd.org> To: Danny Braniss <danny@cs.huji.ac.il> Cc: scsi@freebsd.org Subject: Re: iSCSI first steps! Message-ID: <20050218094946.I24964@pooker.samsco.org> In-Reply-To: <E1D25cV-0005qN-Rl@cs1.cs.huji.ac.il> References: <E1D25cV-0005qN-Rl@cs1.cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 18 Feb 2005, Danny Braniss wrote: Looks wonderful! What are your next steps for it? Scott > > shuttle-2# camcontrol devlist > <HL-DT-ST CD-ROM GCR-8523B 1.00> at scbus2 target 0 lun 0 (cd0,pass0) > <Intransa IP5000 1> at scbus3 target 0 lun 0 (pass1,da0) > shuttle-2# ls /dev/da* > /dev/da0 > shuttle-2# fdisk /dev/da0 > ******* Working on device /dev/da0 ******* > parameters extracted from in-core disklabel are: > cylinders=8354 heads=255 sectors/track=63 (16065 blks/cyl) > > Figures below won't work with BIOS for partitions not in cyl 1 > parameters to be used for BIOS calculations are: > cylinders=8354 heads=255 sectors/track=63 (16065 blks/cyl) > > fdisk: invalid fdisk partition table found > Media sector size is 512 > Warning: BIOS sector numbering starts with sector 1 > Information from DOS bootblock is: > The data for partition 1 is: > sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) > start 63, size 134206947 (65530 Meg), flag 80 (active) > beg: cyl 0/ head 1/ sector 1; > end: cyl 161/ head 254/ sector 63 > The data for partition 2 is: > <UNUSED> > The data for partition 3 is: > <UNUSED> > The data for partition 4 is: > <UNUSED> > shuttle-2# > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050218094946.I24964>