Date: Wed, 29 Nov 2000 13:50:47 -0600 (CST) From: Kevin Day <toasty@temphost.dragondata.com> To: freebsd-scsi@freebsd.org Subject: sym driver in 4.1.1+ on Proliant Message-ID: <200011291950.NAA54487@temphost.dragondata.com>
next in thread | raw e-mail | index | archive | help
I've got several Compaq Proliant ML530's with the internal '896 SCSI
controller. Everything works great on 4.1-RELEASE. Going to 4.1.1 or 4.2
causes sym0 to say "Cannot allocate IRQ resource", followed by a kernel trap
inside the sym driver. Has anyone experienced this, or know what I can try?
-- Kevin
Here's a dmesg from 4.1 where things do work:
(the same issue occurs on a server with no PCI cards in it, except for an fxp0)
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-RELEASE #0: Thu Jul 27 04:44:16 GMT 2000
root@usw4.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (863.93-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 402636800 (393200K bytes)
avail memory = 387260416 (378184K bytes)
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <RCC LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 3.0
pci0: <ATI Mach64-GV graphics accelerator> at 5.0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2400-0x243f mem 0xc6800000-0xc68fffff,0xc69fd000-0xc69fdfff irq 5 at device 8.0 on pci0
fxp0: Ethernet address 00:50:8b:ae:c5:38
isab0: <PCI to ISA bridge (vendor=1166 device=0200)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0x2440-0x244f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pcib2: <RCC LE host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x1148, dev=0x4300) at 6.0 irq 10
pcib255: <RCC LE host to PCI bridge> on motherboard
pci255: <PCI bus> on pcib255
pcib5: <RCC LE host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib5
sym0: <896> port 0x4000-0x40ff mem 0xc6bfc000-0xc6bfdfff,0xc6bffc00-0xc6bfffff irq 11 at device 4.0 on pci5
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: <896> port 0x4400-0x44ff mem 0xc6bf8000-0xc6bf9fff,0xc6bfbc00-0xc6bfbfff irq 15 at device 4.1 on pci5
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
pcib1: <DEC 21154 PCI-PCI bridge> at device 7.0 on pci5
pci6: <PCI bus> on pcib1
sf0: <Adaptec ANA-62044 10/100BaseTX> port 0x5000-0x50ff mem 0xc6d80000-0xc6dfffff irq 5 at device 4.0 on pci6
sf0: Ethernet address: 00:00:d1:ed:c0:e5
miibus0: <MII bus> on sf0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf1: <Adaptec ANA-62044 10/100BaseTX> port 0x5400-0x54ff mem 0xc6d00000-0xc6d7ffff irq 5 at device 5.0 on pci6
sf1: Ethernet address: 00:00:d1:ed:c0:e6
miibus1: <MII bus> on sf1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf2: <Adaptec ANA-62044 10/100BaseTX> port 0x5800-0x58ff mem 0xc6c80000-0xc6cfffff irq 5 at device 6.0 on pci6
sf2: Ethernet address: 00:00:d1:ed:c0:e7
miibus2: <MII bus> on sf2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf3: <Adaptec ANA-62044 10/100BaseTX> port 0x5c00-0x5cff mem 0xc6c00000-0xc6c7ffff irq 5 at device 7.0 on pci6
sf3: Ethernet address: 00:00:d1:ed:c0:e8
miibus3: <MII bus> on sf3
ukphy3: <Generic IEEE 802.3u media interface> on miibus3
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib3: <DEC 21154 PCI-PCI bridge> at device 9.0 on pci5
pci7: <PCI bus> on pcib3
sf4: <Adaptec ANA-62044 10/100BaseTX> port 0x6000-0x60ff mem 0xc6f80000-0xc6ffffff irq 5 at device 4.0 on pci7
sf4: Ethernet address: 00:00:d1:ed:c0:7d
miibus4: <MII bus> on sf4
ukphy4: <Generic IEEE 802.3u media interface> on miibus4
ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf5: <Adaptec ANA-62044 10/100BaseTX> port 0x6400-0x64ff mem 0xc6f00000-0xc6f7ffff irq 5 at device 5.0 on pci7
sf5: Ethernet address: 00:00:d1:ed:c0:7e
miibus5: <MII bus> on sf5
ukphy5: <Generic IEEE 802.3u media interface> on miibus5
ukphy5: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf6: <Adaptec ANA-62044 10/100BaseTX> port 0x6800-0x68ff mem 0xc6e80000-0xc6efffff irq 5 at device 6.0 on pci7
sf6: Ethernet address: 00:00:d1:ed:c0:7f
miibus6: <MII bus> on sf6
ukphy6: <Generic IEEE 802.3u media interface> on miibus6
ukphy6: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf7: <Adaptec ANA-62044 10/100BaseTX> port 0x6c00-0x6cff mem 0xc6e00000-0xc6e7ffff irq 5 at device 7.0 on pci7
sf7: Ethernet address: 00:00:d1:ed:c0:80
miibus7: <MII bus> on sf7
ukphy7: <Generic IEEE 802.3u media interface> on miibus7
ukphy7: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0712 (System Board)> on eisa0 slot 0
eisa0: unknown card @@@0000 (0x00000000) at slot 5
eisa0: unknown card @@@0000 (0x00000000) at slot 6
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: cannot reserve I/O port range
ata0-slave: identify retries exceeded
acd0: CDROM <COMPAQ CDR-8435> at ata0-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:da0s1a
da1 at sym0 bus 0 target 1 lun 0
da1: <COMPAQ BB018135B5 B013> Fixed Direct Access SCSI-2 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da1: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
da2 at sym0 bus 0 target 2 lun 0
da2: <COMPAQ BB018135B5 B013> Fixed Direct Access SCSI-2 device
da2: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da2: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ BB01813467 3B05> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 17365MB (35565080 512 byte sectors: 255H 63S/T 2213C)
vinum: loaded
vinum: reading configuration from /dev/da2s1b
vinum: updating configuration from /dev/da1s1b
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200011291950.NAA54487>