Date: Sat, 30 Jun 2012 06:43:16 +0200 From: Matthias Apitz <guru@unixarea.de> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-current@freebsd.org Subject: Re: no keyboard after booting r235646 in laptop FS Amilo D 7830 Message-ID: <20120630044316.GA2383@tinyCurrent> In-Reply-To: <201206291645.57359.hselasky@c2i.net> References: <20120629133422.GA2233@tiny.Sisis.de> <201206291645.57359.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--ibTvN161/egqYuK8 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit El día Friday, June 29, 2012 a las 04:45:57PM +0200, Hans Petter Selasky escribió: > On Friday 29 June 2012 15:34:23 Matthias Apitz wrote: > > Hello, > > > > I have a boot-able USB key with r235646 which works fine in all my > > laptops so far; today I got as a gift an older FS Amilo D 7830 which has > > enough resources to use it as new build machine (1 GByte RAM, 80 GByte > > disk). I booted it with from the USB key and after the system is up it > > does not echo or react on any key-press; before booting the keys are > > working, for example in the menu to boot into single user etc. > > > > What could be the problem? > > > > I will later configure that the USB booted system brings Ethernet and > > SSH up, maybe I can see something when I can login via SSH... > > > > matthias > > What does dmesg say about USB? > attached is the dmesg output matthias -- Matthias Apitz t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e <guru@unixarea.de> - w http://www.unixarea.de/ UNIX since V7 on PDP-11 | UNIX on mainframe since ESER 1055 (IBM /370) UNIX on x86 since SVR4.2 UnixWare 2.1.2 | FreeBSD since 2.2.5 --ibTvN161/egqYuK8 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #0 r235646: Sat May 19 15:52:36 CEST 2012 guru@aurora.Sisis.de:/usr/obj/usr/src/sys/GENERIC i386 WARNING: WITNESS option enabled, expect reduced performance. CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2398.35-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Family = f Model = 2 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> real memory = 1073741824 (1024 MB) avail memory = 1027141632 (979 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <A M I OEMAPIC > ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3ff00000 (3) failed driver bug: Unable to set devclass (class: acpi_sysresource devname: (unknown)) driver bug: Unable to set devclass (class: acpi_timer devname: (unknown)) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845G host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xd0000000-0xd7ffffff,0xffcf0000-0xffcfffff irq 16 at device 0.0 on pci1 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xdf20-0xdf3f irq 16 at device 29.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xdf40-0xdf5f irq 19 at device 29.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xdf80-0xdf9f irq 18 at device 29.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xffeffc00-0xffefffff irq 23 at device 29.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> at device 3.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <VIA Fire II (VT6306)> port 0xcc00-0xcc7f mem 0xffdff800-0xffdfffff irq 18 at device 10.0 on pci2 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:03:0d:49:75:50:7a:e8 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x29b8000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:03:0d:50:7a:e8 fwe0: Ethernet address: 02:03:0d:50:7a:e8 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:03:0d:49:75:50:7a:e8 @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xc800-0xc8ff mem 0xffdfe000-0xffdfefff irq 17 at device 12.0 on pci2 sis0: Silicon Revision: DP83816A miibus0: <MII bus> on sis0 nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0 nsphyter0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:a0:cc:df:75:57 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0xe000-0xe0ff,0xe100-0xe13f at device 31.5 on pci0 pcm0: <VIA Technologies VIA1612A AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 acpi_lid0: <Control Method Lid Switch> on acpi0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen3.2: <USBest Technology> at usbus3 umass0: <USBest Technology Intenso Premium Line, class 0/0, rev 2.00/1.00, addr 2> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:3:0:-1: Attached to scbus3 ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: < DVD+RW RW8160 1.03> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: cd present [847 x 2048 byte records] <IC25N080ATMR04-0 MO4OAC0J> ATA-6 device da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: <Intenso Premium 0.00> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 14784MB (30277632 512 byte sectors: 255H 63S/T 1884C) ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 Timecounter "TSC" frequency 2398347920 Hz quality 800 WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/da0s1a [rw]... Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 done All buffers synced. lock order reversal: 1st 0xc7a4a388 ufs (ufs) @ /usr/src/sys/kern/vfs_mount.c:1254 2nd 0xc7a57168 devfs (devfs) @ /usr/src/sys/ufs/ffs/ffs_vfsops.c:1383 KDB: stack backtrace: db_trace_self_wrapper(c0fcdffb,7366662f,7366765f,2e73706f,33313a63,...) at db_trace_self_wrapper+0x26 kdb_backtrace(c0ac004b,c0fd1a48,c12ce208,567,c4fb39c4,...) at kdb_backtrace+0x2a _witness_debugger(c0fd1a48,c7a57168,c0fc4dcc,c51864d8,c1001cf0,...) at _witness_debugger+0x25 witness_checkorder(c7a57168,9,c1001cf0,567,c7a57188,...) at witness_checkorder+0x86f __lockmgr_args(c7a57168,80400,c7a57188,0,0,...) at __lockmgr_args+0x8b5 vop_stdlock(c4fb3ac8,0,c4fb3abc,c12ce218,c7976950,...) at vop_stdlock+0x62 VOP_LOCK1_APV(c10ee3a0,c4fb3ac8,c7a4b770,c11404e0,c7a57110,...) at VOP_LOCK1_APV+0xf3 _vn_lock(c7a57110,80400,c1001cf0,567,c7923000,...) at _vn_lock+0x5e ffs_flushfiles(c7951a40,2,c79768a0,0,c1140580,...) at ffs_flushfiles+0xa7 ffs_unmount(c7951a40,80000,c4fb3ba0,51f,0,...) at ffs_unmount+0x180 dounmount(c7951a40,80000,c79768a0,d9931c2c,0,...) at dounmount+0x419 vfs_unmountall(c0fc9b21,0,c0fc9a6f,143,c0a75bf4,...) at vfs_unmountall+0x4e kern_reboot(0,0,c0fc9a6f,c2,0,...) at kern_reboot+0x4ea sys_reboot(c79768a0,c4fb3ccc,c101c7a8,c0fd3464,c0aae917,...) at sys_reboot+0x6c syscall(c4fb3d08) at syscall+0x2de Xint0x80_syscall() at Xint0x80_syscall+0x21 --- syscall (55, FreeBSD ELF32, sys_reboot), eip = 0x2809726b, esp = 0xbfbfeaac, ebp = 0xbfbfebf8 --- Uptime: 5m14s usbus0: Controller shutdown uhub0: at usbus0, port 1, addr 1 (disconnected) usbus0: Controller shutdown complete usbus1: Controller shutdown uhub1: at usbus1, port 1, addr 1 (disconnected) usbus1: Controller shutdown complete usbus2: Controller shutdown uhub2: at usbus2, port 1, addr 1 (disconnected) usbus2: Controller shutdown complete usbus3: Controller shutdown uhub3: at usbus3, port 1, addr 1 (disconnected) ugen3.2: <USBest Technology> at usbus3 (disconnected) umass0: at uhub3, port 1, addr 2 (disconnected) (da0:umass-sim0:0:0:0): lost device - 0 outstanding, 0 refs (da0:umass-sim0:0:0:0): removing device entry usbus3: Controller shutdown complete MP Configuration Table version 1.4 found at 0xc00f8df0 Table 'FACP' at 0x3ffd0200 Table 'APIC' at 0x3ffd0390 APIC: Found table at 0x3ffd0390 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 129 ACPI ID 2: disabled Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-CURRENT #0 r235646: Sat May 19 15:52:36 CEST 2012 guru@aurora.Sisis.de:/usr/obj/usr/src/sys/GENERIC i386 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc15f0000. Calibrating TSC clock ... TSC clock: 2398344540 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2398.34-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Family = f Model = 2 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte line size real memory = 1073741824 (1024 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001826000 - 0x000000003ed6dfff, 1028947968 bytes (251208 pages) avail memory = 1027141632 (979 MB) INTR: Adding local APIC 0 as a target Event timer "LAPIC" quality 400 ACPI APIC Table: <A M I OEMAPIC > APIC: CPU 0 has ACPI ID 1 bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x31 pnpbios: Found PnP BIOS data at 0xc00f32c0 pnpbios: Entry = f0000:41fa Rev = 1.0 Other BIOS signatures found: ULE: setup cpu 0 ACPI: RSDP 0xf54e0 00014 (v00 ACPIAM) ACPI: RSDT 0x3ffd0000 00030 (v01 A M I OEMRSDT 06000308 MSFT 00000097) ACPI: FACP 0x3ffd0200 00081 (v02 A M I OEMFACP 06000308 MSFT 00000097) ACPI: DSDT 0x3ffd03f0 03831 (v01 UW FSC_____ 00000016 INTL 02002026) ACPI: FACS 0x3ffdf000 00040 ACPI: APIC 0x3ffd0390 0005C (v01 A M I OEMAPIC 06000308 MSFT 00000097) ACPI: OEMB 0x3ffdf040 00108 (v01 A M I AMI_OEM 06000308 MSFT 00000097) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled VESA: INT 0x10 vector 0xc000:0x1e14 VESA: information block 0000 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 0010 00 01 00 04 00 01 19 01 00 01 2f 01 00 01 34 01 0020 00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 0030 94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 0040 b2 01 b3 01 b4 01 b5 01 b6 01 c2 01 c3 01 c4 01 0050 c5 01 c6 01 00 01 83 01 84 01 85 01 86 01 01 01 0060 10 01 11 01 12 01 21 01 03 01 13 01 14 01 15 01 0070 22 01 05 01 16 01 17 01 18 01 23 01 07 01 19 01 0080 1a 01 1b 01 24 01 40 01 41 01 42 01 43 01 44 01 0090 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0100 41 54 49 20 4d 4f 42 49 4c 49 54 59 20 52 41 44 0110 45 4f 4e 20 39 30 30 30 00 41 54 49 20 54 65 63 0120 68 6e 6f 6c 6f 67 69 65 73 20 49 6e 63 2e 00 4d 0130 39 20 20 00 30 31 2e 30 30 00 00 00 00 00 00 00 0140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 VESA: 55 mode(s) found VESA: v2.0, 65536k memory, flags:0x1, mode table:0xc4dbf022 (1000022) VESA: ATI MOBILITY RADEON 9000 VESA: ATI Technologies Inc. M9 01.00 io: <I/O> null: <null device, zero device> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 ctl: CAM Target Layer loaded acpi0: <A M I OEMRSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 ACPI: Executed 2 blocks of module-level executable AML code pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25608086) pcibios: BIOS version 2.10 acpi0: Power Button (fixed) acpi0: wakeup code va 0xc4de9000 pa 0x9e000 ACPI: \\_PR_.CPU1 (ACPI ID 1) -> cpu0 ACPI: \\_PR_.CPU2 (ACPI ID 2) ignored acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3ff00000 (3) failed acpi_sysresource: acpi_sysresource0 already exists; skipping it driver bug: Unable to set devclass (class: acpi_sysresource devname: (unknown)) acpi_timer: acpi_timer0 already exists; skipping it driver bug: Unable to set devclass (class: acpi_timer devname: (unknown)) cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50 Event timer "RTC" frequency 32768 Hz quality 0 ACPI timer: 1/1 1/1 1/1 1/2 1/2 1/2 1/2 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 3 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: decoding 4 range 0-0xcf7 pcib0: decoding 4 range 0xd00-0xffff pcib0: decoding 3 range 0xa0000-0xbffff pcib0: decoding 3 range 0xd1000-0xdffff pcib0: decoding 3 range 0x40000000-0xffffffff pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2560, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xe0000000, size 28, enabled pcib0: allocated type 3 (0xe0000000-0xefffffff) for rid 10 of pci0:0:0:0 found-> vendor=0x8086, dev=0x2561, revid=0x03 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24c2, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0xdf20, size 5, enabled pcib0: allocated type 4 (0xdf20-0xdf3f) for rid 20 of pci0:0:29:0 pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x24c4, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0xdf40, size 5, enabled pcib0: allocated type 4 (0xdf40-0xdf5f) for rid 20 of pci0:0:29:1 pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x24c7, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 map[20]: type I/O Port, range 32, base 0xdf80, size 5, enabled pcib0: allocated type 4 (0xdf80-0xdf9f) for rid 20 of pci0:0:29:2 pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x24cd, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xffeffc00, size 10, enabled pcib0: allocated type 3 (0xffeffc00-0xffefffff) for rid 10 of pci0:0:29:7 pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0x82 domain=0, bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24c0, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cb, revid=0x02 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1 pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1 pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1 pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1 map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled pcib0: allocated type 4 (0xffa0-0xffaf) for rid 20 of pci0:0:31:1 map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=0x8086, dev=0x24c3, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[20]: type I/O Port, range 32, base 0x540, size 5, enabled pcib0: allocated type 4 (0x540-0x55f) for rid 20 of pci0:0:31:3 found-> vendor=0x8086, dev=0x24c5, revid=0x02 domain=0, bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xe000, size 8, enabled pcib0: allocated type 4 (0xe000-0xe0ff) for rid 10 of pci0:0:31:5 map[14]: type I/O Port, range 32, base 0xe100, size 6, enabled pcib0: allocated type 4 (0xe100-0xe13f) for rid 14 of pci0:0:31:5 map[18]: type Memory, range 32, base 0, size 9, memory disabled map[1c]: type Memory, range 32, base 0, size 8, memory disabled found-> vendor=0x8086, dev=0x24c6, revid=0x02 domain=0, bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xe200, size 8, enabled pcib0: allocated type 4 (0xe200-0xe2ff) for rid 10 of pci0:0:31:6 map[14]: type I/O Port, range 32, base 0xe300, size 7, enabled pcib0: allocated type 4 (0xe300-0xe37f) for rid 14 of pci0:0:31:6 agp0: <Intel 82845G host to AGP bridge> on hostb0 agp0: allocating GATT for aperture of size 256M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib1 pcib0: allocated type 3 (0xffc00000-0xffcfffff) for rid 20 of pcib1 pcib0: allocated type 3 (0xceb00000-0xdeafffff) for rid 24 of pcib1 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xb000-0xbfff pcib1: memory decode 0xffc00000-0xffcfffff pcib1: prefetched decode 0xceb00000-0xdeafffff pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x4c66, revid=0x01 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0187, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 27, enabled pcib1: allocated prefetch range (0xd0000000-0xd7ffffff) for rid 10 of pci0:1:0:0 map[14]: type I/O Port, range 32, base 0xb000, size 8, enabled pcib1: allocated I/O port range (0xb000-0xb0ff) for rid 14 of pci0:1:0:0 map[18]: type Memory, range 32, base 0xffcf0000, size 16, enabled pcib1: allocated memory range (0xffcf0000-0xffcfffff) for rid 18 of pci0:1:0:0 pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xd0000000-0xd7ffffff,0xffcf0000-0xffcfffff irq 16 at device 0.0 on pci1 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xdf20-0xdf3f irq 16 at device 29.0 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51 uhci0: LegSup = 0x2f00 usbus0 on uhci0 usbus0: bpf attached uhci0: usbpf: Attached uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xdf40-0xdf5f irq 19 at device 29.1 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52 uhci1: LegSup = 0x2f00 usbus1 on uhci1 usbus1: bpf attached uhci1: usbpf: Attached uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xdf80-0xdf9f irq 18 at device 29.2 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 uhci2: LegSup = 0x2f00 usbus2 on uhci2 usbus2: bpf attached uhci2: usbpf: Attached ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xffeffc00-0xffefffff irq 23 at device 29.7 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 54 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: bpf attached ehci0: usbpf: Attached pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib2 pcib0: allocated type 3 (0xffd00000-0xffdfffff) for rid 20 of pcib2 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xffd00000-0xffdfffff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 found-> vendor=0x1217, dev=0x6972, revid=0x00 domain=0, bus=2, slot=3, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, enabled found-> vendor=0x1106, dev=0x3044, revid=0x80 domain=0, bus=2, slot=10, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns) intpin=a, irq=9 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xffdff800, size 11, enabled pcib2: allocated memory range (0xffdff800-0xffdfffff) for rid 10 of pci0:2:10:0 map[14]: type I/O Port, range 32, base 0xcc00, size 7, enabled pcib2: allocated I/O port range (0xcc00-0xcc7f) for rid 14 of pci0:2:10:0 pcib2: matched entry for 2.10.INTA pcib2: slot 10 INTA hardwired to IRQ 18 found-> vendor=0x100b, dev=0x0020, revid=0x00 domain=0, bus=2, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns) intpin=a, irq=3 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xc800, size 8, enabled pcib2: allocated I/O port range (0xc800-0xc8ff) for rid 10 of pci0:2:12:0 map[14]: type Memory, range 32, base 0xffdfe000, size 12, enabled pcib2: allocated memory range (0xffdfe000-0xffdfefff) for rid 14 of pci0:2:12:0 pcib2: matched entry for 2.12.INTA pcib2: slot 12 INTA hardwired to IRQ 17 cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> at device 3.0 on pci2 pcib2: allocated memory range (0xffd00000-0xffd00fff) for rid 10 of cbb0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xffd00000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.3.INTA pcib2: slot 3 INTA hardwired to IRQ 17 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 55 cbb0: PCI Configuration space: 0x00: 0x69721217 0x04100007 0x06070000 0x00022000 0x10: 0xffd00000 0x020000a0 0x20040302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x07400111 0x40: 0x102a1734 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x08801882 0x90: 0x00000002 0x00000000 0x00000000 0x00000000 0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000009 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x08004000 0x028203ea 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: <VIA Fire II (VT6306)> port 0xcc00-0xcc7f mem 0xffdff800-0xffdfffff irq 18 at device 10.0 on pci2 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:03:0d:49:75:50:7a:e8 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x29b8000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:03:0d:50:7a:e8 fwe0: bpf attached fwe0: Ethernet address: 02:03:0d:50:7a:e8 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:03:0d:49:75:50:7a:e8 @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xc800-0xc8ff mem 0xffdfe000-0xffdfefff irq 17 at device 12.0 on pci2 sis0: Silicon Revision: DP83816A miibus0: <MII bus> on sis0 nsphyter0: <DP83815 10/100 media interface> PHY 0 on miibus0 nsphyter0: OUI 0x1000e8, model 0x0002, rev. 1 nsphyter0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: bpf attached sis0: Ethernet address: 00:a0:cc:df:75:57 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56 ata1: <ATA channel> at channel 1 on atapci0 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0xe000-0xe0ff,0xe100-0xe13f at device 31.5 on pci0 pcib0: allocated type 3 (0x80000000-0x800001ff) for rid 18 of pcm0 pcm0: Lazy allocation of 0x200 bytes rid 0x18 type 3 at 0x80000000 pcib0: allocated type 3 (0x80000200-0x800002ff) for rid 1c of pcm0 pcm0: Lazy allocation of 0x100 bytes rid 0x1c type 3 at 0x80000200 pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 pcm0: <VIA Technologies VIA1612A AC97 Codec (id = 0x56494161)> pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Reserved 27 pcm0: Primary codec extended features variable rate PCM, AMAP pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 1968000, 4000; 0xc4f10000 -> 1968000 pcm0: sndbuf_setmap 196c000, 4000; 0xc4f14000 -> 196c000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 ppc0: using extended I/O port range ppc0: SPP EPP ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 58 ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached acpi_lid0: <Control Method Lid Switch> on acpi0 ex_isa_identify() ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 1: ioport 0x1c00 alloc failed ahc_isa_probe 2: ioport 0x2c00 alloc failed ahc_isa_probe 3: ioport 0x3c00 alloc failed ahc_isa_probe 4: ioport 0x4c00 alloc failed ahc_isa_probe 5: ioport 0x5c00 alloc failed ahc_isa_probe 6: ioport 0x6c00 alloc failed ahc_isa_probe 7: ioport 0x7c00 alloc failed ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 2 of orm0 pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 2 of orm0 pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 2 of orm0 pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 2 of orm0 pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 2 of orm0 pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 2 of orm0 pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 2 of orm0 pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 2 of orm0 pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 2 of orm0 pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 2 of orm0 pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 2 of orm0 pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 2 of orm0 pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 2 of orm0 pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 2 of orm0 pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 2 of orm0 pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 2 of orm0 pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 2 of orm0 pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 2 of orm0 pcib0: allocated type 3 (0xda000-0xda7ff) for rid 2 of orm0 pcib0: allocated type 3 (0xda800-0xdafff) for rid 2 of orm0 pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 2 of orm0 pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 2 of orm0 pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 2 of orm0 pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 2 of orm0 pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 2 of orm0 pcib0: allocated type 3 (0xdd800-0xddfff) for rid 2 of orm0 pcib0: allocated type 3 (0xde000-0xde7ff) for rid 2 of orm0 pcib0: allocated type 3 (0xde800-0xdefff) for rid 2 of orm0 pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 2 of orm0 pcib0: allocated type 3 (0xdf800-0xdffff) for rid 2 of orm0 isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atrtc: atrtc0 already exists; skipping it attimer: attimer0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 atkbdc0 failed to probe at port 0x60 on isa0 pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0 uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0 pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1 uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 wbwd0 failed to probe on isa0 isa_probe_children: probing PnP devices p4tcc0: <CPU Frequency Thermal Control> on cpu0 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 66619500 Hz Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 lo0: bpf attached hptrr: no controller detected. pcm0: measured ac97 link rate at 48008 Hz, will use 48000 Hz usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 (aprobe0:ata0:0:0:0): SIGNATURE: 0000 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ata1: reset tp1 mask=03 ostat0=50 ostat1=01 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x10000 (aprobe0:ata1:0:0:0): SIGNATURE: eb14 battery0: battery initialization start acpi_acad0: acline initialization start battery0: battery initialization done, tried 1 times acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered (probe0:ctl2cam0:0:1:0): Error 6, Unretryable error uhub3: 6 ports with 6 removable, self powered ugen3.2: <USBest Technology> at usbus3 umass0: <USBest Technology Intenso Premium Line, class 0/0, rev 2.00/1.00, addr 2> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:3:0:-1: Attached to scbus3 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x10000 (aprobe0:ata1:0:0:0): SETFEATURES SET TRANSFER MODE. ACB: ef 03 00 00 00 40 00 00 00 00 42 00 (aprobe0:ata1:0:0:0): CAM status: Command timeout (aprobe0:ata1:0:0:0): SIGNATURE: eb14 pass0 at ata0 bus 0 scbus0 target 0 lun 0 pass0: <IC25N080ATMR04-0 MO4OAC0J> ATA-6 device pass0: Serial Number MRG401K4G2NA6C pass0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: < DVD+RW RW8160 1.03> Removable CD-ROM SCSI-0 device cd0: Serial Number \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^? cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: cd present [847 x 2048 byte records] GEOM: new disk cd0 pass1 at ata1 bus 0 scbus1 target 0 lun 0 pass1: < DVD+RW RW8160 1.03> Removable CD-ROM SCSI-0 device pass1: Serial Number \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^? pass1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) pass2 at umass-sim0 bus 0 scbus3 target 0 lun 0 pass2: <Intenso Premium 0.00> Removable Direct Access SCSI-2 device pass2: Serial Number 09073100023558 pass2: 40.000MB/s transfers ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <IC25N080ATMR04-0 MO4OAC0J> ATA-6 device ada0: Serial Number MRG401K4G2NA6C da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: <Intenso Premium 0.00> Removable Direct Access SCSI-2 device da0: Serial Number 09073100023558 da0: 40.000MB/s transfers da0: 14784MB (30277632 512 byte sectors: 255H 63S/T 1884C) ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 Timecounter "TSC" frequency 2398344540 Hz quality 800 WARNING: WITNESS option enabled, expect reduced performance. GEOM: new disk da0 GEOM: new disk ada0 Trying to mount root from ufs:/dev/da0s1a [rw]... start_init: trying /sbin/init --ibTvN161/egqYuK8--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120630044316.GA2383>