From owner-freebsd-mobile Mon Aug 21 1:10:21 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from hotmail.com (f177.law9.hotmail.com [64.4.9.177]) by hub.freebsd.org (Postfix) with ESMTP id E35AB37B43C for ; Mon, 21 Aug 2000 01:10:19 -0700 (PDT) Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 21 Aug 2000 01:10:19 -0700 Received: from 63.195.114.87 by lw9fd.law9.hotmail.msn.com with HTTP; Mon, 21 Aug 2000 GMT X-Originating-IP: [63.195.114.87] From: "Greg Smith" To: freebsd-mobile@freebsd.org Subject: Re: Winbook FX w/ Cirrus 5729/5730 PCIC + FreeBSD 4.1R = SOL ? Date: Mon, 21 Aug 2000 08:10:19 GMT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 21 Aug 2000 08:10:19.0809 (UTC) FILETIME=[3F3F9910:01C00B47] Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Thanks Sean. I used the following: device pcic0 at isa? port 0xfcec irq 9 and it worked, with ep0 seemingly configuring properly on irq 11. I will test it, try polling mode etc. tomorrow. The machine did hang and howl like a banshee when I removed the card however, but that will not be an issue under normal operations. >: I recently installed FreeBSD 4.1-Release on a Winbook FX (P133, 32MB, >2GB). >: The machine now can dual-boot win95 or FreeBSD. The installation went >fine, >: but I get the following errors: >: pccardd: "fatal error: no PC-CARD slots" >: pccardc: "/dev/card0: Device not configured" > >It is not picking up the pcic in your machine ... do you know what >your pcic is? > >I had to do the following to get a Winbook-LM to work (under 3.?) > ># PCIC device ># - port is a bigtime hack (got from scanpci :) >device pcic0 at isa? port 0xfcfc irq 11 > ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message