Date: Sun, 19 Dec 2004 11:46:58 +0100 From: craig <craig.freebsd@online.de> To: freebsd-questions@freebsd.org, freebsd-hardware@freebsd.org, diavul@bsd.krakow.pl Subject: Marvell 88E8001 on sk0 and RELENG_5_3 - big problems Message-ID: <41C55C22.9020101@online.de>
next in thread | raw e-mail | index | archive | help
> Here's the fix: > http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/if_sk.c.diff?r1=1.51&r2=1.52 <http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/if_sk.c.diff?r1=1.51&r2=1.52>; > > -- > Michal Belczyk do to severe incompatibility problems with my previous motherboard's IDE and fbsd5.3, i recently purchased a new gigabyte 865PE, complete with onboard marvell nic. :( from dmesg (after applying identifying patch) ---- skc0: <Marvell Gigabit Ethernet> port 0xac00-0xacff mem 0xfb000000-0xfb003fff irq 20 at device 9.0 on pci2 skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter skc0: PN: Yukon 88E8001 skc0: EC: Rev. 1.3 skc0: MN: Marvell skc0: SN: AbCdEfG5ca025 sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:0f:ea:5c:a0:25 miibus0: <MII bus> on sk0 ---- unfortuantely, this motherboard too has severe problems. although the nic is recognised at install/boot, it simply *refuses* to come up. dhclient just draws a blank. i have tried to ifconfig sk0 up and down a few times, but makes no difference. i tried to apply Michal's above patch off an absolute fresh install. ie. the *very* first thing i did sadly, only 1 of the 2 chunks succeeded. from if_sk.c.rej *************** *** 2425,2431 **** /* serial mode register */ DPRINTFN(6, ("sk_init_yukon: 9\n")); SK_YU_WRITE_2(sc_if, YUKON_SMR, YU_SMR_DATA_BLIND(0x1c) | - YU_SMR_MFL_VLAN | YU_SMR_IPG_DATA(0x1e)); DPRINTFN(6, ("sk_init_yukon: 10\n")); /* Setup Yukon's address */--- 2425,2432 ---- /* serial mode register */ DPRINTFN(6, ("sk_init_yukon: 9\n")); SK_YU_WRITE_2(sc_if, YUKON_SMR, YU_SMR_DATA_BLIND(0x1c) | + YU_SMR_MFL_VLAN | YU_SMR_MFL_JUMBO | + YU_SMR_IPG_DATA(0x1e)); DPRINTFN(6, ("sk_init_yukon: 10\n")); /* Setup Yukon's address */ --- note, i cannot cvsup to latest RLEENG_5, because i have no network! :( any ideas on what to do from here? although the patch did not work automatically, i could manually insert the code, but i am well aware of the problems that may cause! if anyone (in europe) is able to help me solve this issue, i will gladly send them my old ASRock PE ProHT motherboard! its in perfect condition and works fine with freebsd4.10 - tragically, 5.3 refuses to work with the onboard sis IDE controller... much thanks, --- craig.freebsd at online.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41C55C22.9020101>