Date: Wed, 16 Mar 2016 20:29:58 -0700 From: "Russell L. Carter" <rcarter@pinyon.org> To: "freebsd-virtualization@freebsd.org" <freebsd-virtualization@freebsd.org> Subject: newbie: bhyve basic networking problem Message-ID: <56EA24B6.10603@pinyon.org>
next in thread | raw e-mail | index | archive | help
Greetings,
I have installed the latest -current snapshot iso as a bhyve guest on
a -stable host, and I am unable to ping the network from either side.
This is my first attempt at bhyve virtualization so likely I have made
an error somewhere.
I'm using the git iohyve script to orchestrate the install, but from
looking at the commits and the script source (which is written quite
beautifully), I don't see anything troublesome.
So here is what I see from inside the bhyve FreeBSD-current VM:
root@freebsd-current:~ # route -n show default
route to: 0.0.0.0
destination: 0.0.0.0
mask: 0.0.0.0
gateway: 10.0.10.5
fib: 0
interface: vtnet0
flags: <UP,GATEWAY,DONE,STATIC>
recvpipe sendpipe ssthresh rtt,msec mtu weight expire
0 0 0 0 1500 1 0
root@freebsd-current:~ # ifconfig -a
vtnet0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST>
metric 0 mtu 1500
options=80028<VLAN_MTU,JUMBO_MTU,LINKSTATE>
ether 00:a0:98:98:e6:ad
inet 10.0.10.20 netmask 0xffffff00 broadcast 10.0.10.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 10Gbase-T <full-duplex>
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
And then, on the host side:
root@feyerabend> ifconfig -a
em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0
mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
ether 00:15:17:bc:29:ba
inet 10.0.10.6 netmask 0xffffff00 broadcast 10.0.10.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO>
ether 00:15:17:bc:29:bb
inet 10.0.11.6 netmask 0xffffff00 broadcast 10.0.11.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
description: iohyve-bridge
ether 02:63:ec:5e:4b:00
nd6 options=1<PERFORMNUD>
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: em0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 20000
tap0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
description: iohyve-FreeBSD-current
options=80000<LINKSTATE>
ether 00:bd:81:b8:05:00
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: active
Opened by PID 1370
root@feyerabend> route -n show default
route to: 0.0.0.0
destination: 0.0.0.0
mask: 0.0.0.0
gateway: 10.0.10.5
fib: 0
interface: em0
flags: <UP,GATEWAY,DONE,STATIC>
recvpipe sendpipe ssthresh rtt,msec mtu weight expire
0 0 0 0 1500 1 0
root@feyerabend>
Any ideas appreciated.
Best regards,
Russell
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?56EA24B6.10603>