Date: 11 Oct 2003 03:43:42 -0000 From: "Jose R.Rey" <king@v2project.com> To: FreeBSD-gnats-submit@FreeBSD.org Subject: sparc64/57856: sparc64: IDE Raid controller no detect discs Message-ID: <20031011034342.953.qmail@v2project.com> Resent-Message-ID: <200310110350.h9B3oNFk091765@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 57856
>Category: sparc64
>Synopsis: sparc64: IDE Raid controller no detect discs
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-sparc64
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Oct 10 20:50:22 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator: Jose R.Rey
>Release: FreeBSD 5.1-RELEASE #0
>Organization:
Materia Gris
>Environment:
Sun Ultra-30, FreeBSD 5.1-RELEASE, Kouwell ATA RAID card sil0680 chipset
>Description:
ATA RAID controller with chipset sil0680 no detect devices (tested with many hard drives and CDROMS)
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Sat Oct 4 02:35:45 CEST 2003
king@colosus.labs.v2project.com:/usr/src/sys/sparc64/compile/COLOSUS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0336000.
Timecounter "tick" frequency 247995109 Hz
real memory = 112476160 (107 MB)
avail memory = 104308736 (99 MB)
machine: SUNW,Ultra-30
cpu0: Sun Microsystems UltraSparc-II Processor (248.00 MHz CPU)
mask=0x20 maxtl=5 maxwin=7
null: <null device, zero device>
random: <entropy source>
openfirm: <OpenFirmware control device>
mem: <memory & I/O>
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B
initialializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz
DVMA map: 0xfc000000 to 0xffffffff
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 1, range 32, base 70000000, size 24, enabled
map[14]: type 1, range 32, base 71000000, size 23, enabled
found-> vendor=0x108e, dev=0x1000, revid=0x01
bus=0, slot=1, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x52 (2460 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns)
map[10]: type 1, range 32, base 00008000, size 15, memory disabled
found-> vendor=0x108e, dev=0x1001, revid=0x01
bus=0, slot=1, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0x52 (2460 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=33
map[10]: type 4, range 32, base 00000400, size 8, port disabled
map[14]: type 1, range 32, base 00010000, size 8, enabled
map[18]: type 1, range 32, base 00011000, size 12, enabled
found-> vendor=0x1000, dev=0x000f, revid=0x03
bus=0, slot=3, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords)
lattimer=0x8c (4200 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=32
map[10]: type 4, range 32, base 00000800, size 3, port disabled
map[14]: type 4, range 32, base 00000808, size 2, enabled
map[18]: type 4, range 32, base 00000810, size 3, enabled
map[1c]: type 4, range 32, base 00000818, size 2, enabled
map[20]: type 4, range 32, base 00000820, size 4, enabled
map[24]: type 1, range 32, base 00012000, size 8, memory disabled
found-> vendor=0x1095, dev=0x0680, revid=0x02
bus=0, slot=5, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=2
powerspec 2 supports D0 D1 D2 D3 current D0
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at dev
ice 1.0 on pci0
ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072
a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver
attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 50,37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
sab0: <Siemens SAB 82532 v3.2> addr 0x1400400000-0x140040007f irq 43 on ebus0
sabtty0: <ttya> on sab0
sabtty0: console 9600,8,n,1,-
sabtty1: <ttyb> on sab0
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 42 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x1400304
3bc-0x14003043cb irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x1400
3023f0-0x14003023f7 irq 39 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: registered as a time-of-day clock (resolution 1000000us)
eeprom0: hostid 80899706
eeprom0: current time: 1065843600.000000000
ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no
driver attached)
ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x
1400702000-0x140070200f,0x1400200000-0x14002000ff irq 36,35 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff irq 33 at device 1.1 on pci0
hme0: Ethernet address: 08:00:20:89:97:06
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: bpf attached
sym0: <875> port 0x400-0x4ff mem 0x11000-0x11fff,0x10000-0x100ff irq 32 at devic
e 3.0 on pci0
sym0: chip clock is 40037KHz
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
atapci0: <SiI 0680 UDMA133 controller> port 0x820-0x82f,0x818-0x81b,0x810-0x817,
0x808-0x80b,0x800-0x807 mem 0x12000-0x120ff irq 2 at device 5.0 on pci0
ata2: pre reset mask=03 ostat0=50 ostat2=00
ata2-master: ATAPI 00 00
ata2-slave: ATAPI 00 00
ata2: after reset mask=03 stat0=50 stat1=00
ata2-master: ATA 01 a5
ata2: devices=01
ata2: at 0x800 on atapci0
ata3: pre reset mask=03 ostat0=7f ostat2=7f
ata3-master: ATAPI 7f 7f
ata3-slave: ATAPI 7f 7f
ata3: after reset mask=03 stat0=7f stat1=7f
ata3-master: ATA 7f 7f
ata3-slave: ATA 7f 7f
ata3: devices=00
ata3: at 0x810 on atapci0
pcib1: <U2P UPA-PCI bridge> on nexus0
pcib1: Psycho, impl 0, version 4, ign 0x7c0, bus A
pci1: <PCI bus> on pcib1
pci1: physical bus=1
nexus0: <SUNW,ffb>, type display (no driver attached)
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
ata2-master: timeout waiting for interrupt
ata2-master: ATA identify failed
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(probe1:sym0:0:1:0): Retrying Command
pass0 at sym0 bus 0 target 1 lun 0
pass0: <SEAGATE ST39102LC 0004> Fixed Direct Access SCSI-2 device
pass0: Serial Number LJK587000000291901AM
pass0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabl
ed
da0 at sym0 bus 0 target 1 lun 0
da0: <SEAGATE ST39102LC 0004> Fixed Direct Access SCSI-2 device
da0: Serial Number LJK587000000291901AM
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
GEOM: new disk da0
GEOM: Configure da0a, start 542868480 length 8537840640 end 9080709119
GEOM: Configure da0b, start 0 length 542868480 end 542868479
GEOM: Configure da0c, start 0 length 9080709120 end 9080709119
Mounting root from ufs:/dev/da0a
>How-To-Repeat:
Get this extrange hardware conf and try
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031011034342.953.qmail>