From owner-freebsd-questions Tue Sep 12 7:14:11 2000 Delivered-To: freebsd-questions@freebsd.org Received: from relay-1.ziplink.net (relay-1.ziplink.net [206.15.170.62]) by hub.freebsd.org (Postfix) with ESMTP id 640AA37B423; Tue, 12 Sep 2000 07:14:02 -0700 (PDT) Received: from aldan.algebra.com (bronx-ip-1-250.dynamic.ziplink.net [205.208.96.250]) by relay-1.ziplink.net (8.10.2/8.10.2) with ESMTP id e8CEDeW00502; Tue, 12 Sep 2000 10:13:43 -0400 (EDT) Received: (from mi@localhost) by aldan.algebra.com (8.11.0/8.9.3) id e8CEAKj52623; Tue, 12 Sep 2000 10:10:20 -0400 (EDT) (envelope-from mi) From: Mikhail Teterin Message-Id: <200009121410.e8CEAKj52623@aldan.algebra.com> Subject: can't use the smb-device :( To: stable@freebsd.org, questions@freebsd.org Date: Tue, 12 Sep 2000 10:10:09 -0400 (EDT) X-Face: %UW#n0|w>ydeGt/b@1-.UFP=K^~-:0f#O:D7w hJ5G_<5143Bb3kOIs9XpX+"V+~$adGP:J|SLieM31VIhqXeLBli" \ port 0x2180-0x218f \ irq 9 at device 18.3 on pci0 intpm0: I/O mapped 2180 intpm0: intr IRQ 9 enabled revision 0 smbus0: on intsmb0 smb0: on smbus0 intpm0: PM I/O mapped c00 The iic* are compiled into kernel, but not listed by dmesg -- don't know how important they are: device iicbus # Bus support, required for ic/iic/iicsmb below. device iicbb device iic device iicsmb # smb over i2c bridge I tried commenting them out, which made the kernel 100Kb smaller, but did not help lmmon a bit. What am I missing? Thanks! -mi Full dmesg: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-STABLE #0: Thu Sep 7 12:17:28 EDT 2000 root@aldan.algebra.com:/4G/src/sys/compile/RTFM3 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (298.54-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x633 Stepping = 3 Features=0x80fbff real memory = 335544320 (327680K bytes) avail memory = 322564096 (315004K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "mi" at 0xc0391000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc0391098. Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pci0: at 11.0 irq 16 pci0: <3D Labs Delta graphics accelerator> at 11.1 irq 16 pci0: <3D Labs model 0006 graphics accelerator> at 11.2 irq 16 sym0: <875> port 0xf800-0xf8ff mem 0xfedff000-0xfedfffff,0xfedfec00-0xfedfecff irq 21 at device 13.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0xf400-0xf4ff mem 0xfedfd000-0xfedfdfff,0xfedfe800-0xfedfe8ff irq 22 at device 13.1 on pci0 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking dpt0: port 0xfc60-0xfc7f irq 18 at device 14.0 on pci0 dpt0: DPT PM3224A/9X-R FW Rev. 07CI, 3 channels, 64 CCBs fxp0: port 0xfce0-0xfcff mem 0xfeb00000-0xfebfffff,0xfedfb000-0xfedfbfff irq 20 at device 15.0 on pci0 fxp0: Ethernet address 00:a0:c9:83:0b:d5 pcm0: port 0xfc00-0xfc3f irq 19 at device 16.0 on pci0 isab0: at device 18.0 on pci0 isa0: on isab0 atapci0: port 0xfcb0-0xfcbf at device 18.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 18.2 irq 22 intpm0: port 0x2180-0x218f irq 9 at device 18.3 on pci0 intpm0: I/O mapped 2180 intpm0: intr IRQ 9 enabled revision 0 smbus0: on intsmb0 smb0: on smbus0 intpm0: PM I/O mapped c00 pci0: at 20.0 isa0: too many dependant configs (8) atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: on isa0 sc0: VGA <12 virtual consoles, flags=0x200> fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0 sio1: type 16550A sio2: configured irq 4 not in bitmap of probed irqs 0 sio2 at port 0x3e8-0x3ef irq 4 flags 0x10 on isa0 sio2: type 8250 pca0 at port 0x40 on isa0 joy0 at port 0x201 on isa0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: on ppbus0 lpt0: Interrupt-driven port vpo0: on ppbus0 vpo0: PS2 mode unknown0: <56LC-SM> at port 0x2e8-0x2ef irq 10 drq 5,6 on isa0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled IPsec: Initialized Security Association Processing. IPv6 packet filtering initialized, default to accept, logging disabled SMP: AP CPU #1 Launched! acd0: CDROM at ata1-master using PIO3 Waiting 9 seconds for SCSI devices to settle da3 at vpo0 bus 0 target 6 lun 0 da3: Removable Direct Access SCSI-2 device da3: 96MB (196608 512 byte sectors: 64H 32S/T 96C) da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 4148MB (8496884 512 byte sectors: 255H 63S/T 528C) da2 at sym1 bus 0 target 1 lun 0 da2: Fixed Direct Access SCSI-2 device da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da2: 2047MB (4194058 512 byte sectors: 255H 63S/T 261C) da1 at sym1 bus 0 target 0 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da1: 2047MB (4194058 512 byte sectors: 255H 63S/T 261C) Mounting root from ufs:/dev/da1s1a cd0 at dpt0 bus 2 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message