Date: Sun, 09 Nov 2003 23:53:45 +0900 From: Luke Kearney <lukek@meibin.net> To: Marty Landman <MLandman@face2interface.com> Cc: freebsd-questions@freebsd.org Subject: Re: No route to host Message-ID: <20031109235155.8861.LUKEK@meibin.net> In-Reply-To: <6.0.0.22.0.20031109091603.04503b68@pop.face2interface.com> References: <20031109170045.8858.LUKEK@meibin.net> <6.0.0.22.0.20031109091603.04503b68@pop.face2interface.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 09 Nov 2003 09:49:54 -0500 Marty Landman <MLandman@face2interface.com> granted us these pearls of wisdom: > At 03:00 AM 11/9/2003, you wrote: > > >If the correct information is not there then something like > > > ># route add default -interface ep0 > > Ok I did this (there's no router). Now I can still ping my own ip and > localhost as before and when I try pinging another node on the lan it seems > to hang, i.e. > > PING 192.168.0.1 (192.168.0.1): 56 data bytes > > until ^c out of it. > > Ok so I let it sit like that for a couple of minutes and after interrupting > it got back > > 600 packets transmitted, 0 packets received, 100% packet loss > > >If you can see the correct routing information the next likely culprit > >is the firewall. Try turning off the firewall for starters. > > #ipfw disable firewall > #ping 192.168.0.1 > ^C > 7 packets transmitted, 0 packets received, 100% packet loss > # > > Hmm, any other ideas? > > Marty Landman Face 2 Interface Inc 845-679-9387 > Sign On Required: Web membership software for your site > Make a Website: http://face2interface.com/Home/Demo.shtml please make a rough ascii sketch of your network and post the output to the following :- netstat -rn ifconfig -a in your rc.conf firewall_enable="yes" HTH LukeK
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031109235155.8861.LUKEK>