From owner-freebsd-questions Fri Jan 12 09:24:23 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id JAA22980 for questions-outgoing; Fri, 12 Jan 1996 09:24:23 -0800 (PST) Received: from jack.Colorado.EDU (jack.Colorado.EDU [128.138.149.29]) by freefall.freebsd.org (8.7.3/8.7.3) with ESMTP id JAA22965 for ; Fri, 12 Jan 1996 09:24:13 -0800 (PST) Received: from jack (localhost [127.0.0.1]) by jack.Colorado.EDU (8.7.3/8.7.3/CNS-4.0) with SMTP id KAA27939 for ; Fri, 12 Jan 1996 10:21:24 -0700 (MST) Message-ID: <30F69894.3CBD@Colorado.EDU> Date: Fri, 12 Jan 1996 10:21:24 -0700 From: "Mark G. M. O'Lear" Organization: University of Colorado X-Mailer: Mozilla 2.0b5 (X11; I; SunOS 5.4 sun4m) MIME-Version: 1.0 To: questions@freebsd.org Subject: Re: questions-digest V1 #402 References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-questions@freebsd.org Precedence: bulk Hi, I have the same CD-ROM drive and it works fine for me (FreeBSD 2.1.0-RELEASE recognizes it, etc.) on both the first channel and second. I don't have the configuration I used handy, but I can post it later if you want. I believe it was as easy as enabling ATAPI and wcd0 in the kernel and making device wcd0 (which creates /dev/wcd0c) though. You might need to make device wcd1 if it is on the second channel. Darek Daniluk wrote: > > Hello, > I have new TEAC CD-ROM CD-56(6 speed) with IDE interface. Drive is > on second channel of ide controller (EIDE from Asustek P54TP4 motherboard > with P100). I have enabled wdc1, wcd0 and ATAPI options in my kernel > configuration file. The CD-rom is not recognized by kernel. > Are the any problems with new 6 speed IDE CD drives ? > Darek -- Mark O'Lear