Date: Sat, 25 May 2002 11:50:04 -0700 (PDT) From: Philippe CASIDY <pcasidy@casidy.com> To: freebsd-bugs@FreeBSD.org Subject: i386/33574: kernel hangs on page fault during boot process (kernel trap 12) on Intel based laptop computer Message-ID: <200205251850.g4PIo4I33079@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/33574; it has been noted by GNATS. From: Philippe CASIDY <pcasidy@casidy.com> To: freebsd-gnats-submit@FreeBSD.org, daniel.jahre@informatik.tu-chemnitz.de Cc: Subject: i386/33574: kernel hangs on page fault during boot process (kernel trap 12) on Intel based laptop computer Date: Sat, 25 May 2002 20:36:57 +0200 (CEST) I too do have this problem. dmesg gives: avail memory = 143392768 (140032K bytes) Preloaded elf kernel "kernel" at 0xc0353000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc035309c. K6-family MTRR support enabled (2 registers) md0: Malloc disk Using $PIR table, 3 entries at 0xc00fe840 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1100-0x110f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xf300-0xf31f irq 10 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x1400-0x140f at device 7.3 on pci0 pci0: <S3 ViRGE MX graphics accelerator> at 8.0 pcic0: <TI PCI-1220 PCI-CardBus Bridge> at device 10.0 on pci0 pcic0: PCI Memory allocated: 0x44000000 pcic0: Polling mode pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pccard0: <PC Card bus (classic)> on pcic0 pcic1: <TI PCI-1220 PCI-CardBus Bridge> at device 10.1 on pci0 pccard1: <PC Card bus (classic)> on pcic1 orm0: <Option ROMs> at iomem 0xcc000-0xccfff,0xe2000-0xe27ff,0xe7000-0xe7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ata1-slave: ATAPI identify retries exceeded ad0: 4126MB <TOSHIBA MK4309MAT> [8944/15/63] at ata0-master UDMA33 acd0: CDROM <CD-224E> at ata1-master PIO4 Problem occured sinces 4.4-RELEASE up to today 4.6-RC and also with 5.0-DP1. The work around using the 'set' command works. Thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200205251850.g4PIo4I33079>