Date: Tue, 23 Aug 2005 11:14:42 +0100 From: Alex Zbyslaw <xfb52@dial.pipex.com> To: =?ISO-8859-1?Q?Jimmy_B=E4ckstr=F6m?= <jimmy.backstrom@crystone.se> Cc: "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org> Subject: Re: FAILURE - SETFEATURES SET TRANSFER MODE status=41 Message-ID: <430AF712.8080809@dial.pipex.com> In-Reply-To: <430AD74E.8010701@crystone.se> References: <430AD74E.8010701@crystone.se>
next in thread | previous in thread | raw e-mail | index | archive | help
Jimmy B=E4ckstr=F6m wrote: > Hi list! > I've googled and searched the mailing list archives for this but=20 > couldn't find anything useful. > I just installed freebsd 5.4 on a dell PE 2850 with RAID5 (PERC). The=20 > installation goes fine and as far as I can tell it runs ok, haven't=20 > really done anything with yet though so I can be wrong, but when=20 > booting I get two messages that concerns me: > > ata2-master: FAILURE - SETFEATURES SET TRANSFER MODE=20 > status=3D41<READY,ERROR> error=3D4<ABORTED> > ata2-slave: FAILURE - SETFEATURES SET TRANSFER MODE=20 > status=3D41<READY,ERROR> error=3D4<ABORTED> > > and > > Interrupt storm detected on "irq18: uhci2"; throttling interrupt source= > > When it comes to the ata2-master/slave errors I understand that they=20 > happen for quite a few people running later versions of freebsd? I=20 > haven't found anything on the net that points directly at my hardware=20 > specifics, it seems to happen to a lot of different drives. I'm using=20 > 4 seagate harddrives by the way. > > If this problem has been adressed on the list before, I apologise, I=20 > couldn't find anything about it. I appreciate any pointers and if=20 > someone wants me to post dmesg just ask. > Set up two of these servers recently. We totally ignored the interrupt storm. We couldn't make it go away but = it seemed to do no harm. The ata errors are froeither related to the DRAC virtual devices, or the = real CD, if you have one. They seem to confuse atapicam. If you take=20 atapicam out of the kernel the messages will go away. Your hard drives=20 are SCSI and have nothing to do with ata. --Alex
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?430AF712.8080809>