From owner-freebsd-bugs Mon Feb 21 8:50: 7 2000 Delivered-To: freebsd-bugs@freebsd.org Received: from freefall.freebsd.org (freefall.FreeBSD.ORG [204.216.27.21]) by hub.freebsd.org (Postfix) with ESMTP id 72FB037BDCA for ; Mon, 21 Feb 2000 08:50:03 -0800 (PST) (envelope-from gnats@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.9.3/8.9.2) id IAA98008; Mon, 21 Feb 2000 08:50:03 -0800 (PST) (envelope-from gnats@FreeBSD.org) Date: Mon, 21 Feb 2000 08:50:03 -0800 (PST) Message-Id: <200002211650.IAA98008@freefall.freebsd.org> To: freebsd-bugs@FreeBSD.org Cc: From: Dan Papasian Subject: Re: kern/16808: Fatal trap 12, kernel does not boot Reply-To: Dan Papasian Sender: owner-freebsd-bugs@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org The following reply was made to PR kern/16808; it has been noted by GNATS. From: Dan Papasian To: engarcia@fis.cinvestav.mx Cc: freebsd-gnats-submit@FreeBSD.ORG Subject: Re: kern/16808: Fatal trap 12, kernel does not boot Date: Mon, 21 Feb 2000 11:54:03 -0500 You should try to remove the options you don't need from your kernel to eliminate some possiblities. I took the time to comment on which entries in your kernel configuration were _very_ wrong. Scroll down. On Fri, Feb 18, 2000 at 08:39:46AM -0800, engarcia@fis.cinvestav.mx wrote: > machine "i386" > cpu "I586_CPU" > ident CASA > maxusers 15 > ## check what the hell is maxdsiz > options "MAXDSIZ=(256*1024*1024)" > options "DFLDSIZ=(256*1024*1024)" > options GPL_MATH_EMULATE #Support for x87 emulation You definetly don't need GPL_MATH_EMULATE and unless you are going to run applications up to 256 megs large (instead of the default 128) you don't need the MAXDSIZE and DFLSIZE entries. > options INET #InterNETworking > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep this!] > options MFS #Memory Filesystem > options MFS_ROOT #MFS usable as root device, "MFS" req'ed > options NFS #Network Filesystem > options "CD9660" #ISO 9660 Filesystem > options PROCFS #Process filesystem > options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device SCSI_DELAY? I'm not sure if you have SCSI devices- if you don't, remove this. If you do have SCSI devices, you can leave this in. > options UCONSOLE #Allow users to grab the console > options FAILSAFE #Be conservative > options USERCONFIG #boot -c editor > options INTRO_USERCONFIG > options VISUAL_USERCONFIG #visual boot -c editor You don't need INTRO_USERCONFIG. That is for installation kernels. > options PQ_LARGECACHE > options USER_LDT You don't need PQ_LARGECACHE unless you have a specific reason for having it, and USER_LDT is only if you want to run things like WINE. > options "VM86" > options COMPILING_LINT You don't need COMPILING_LINT. That is for compiling LINT. ... and not for making usable kernels. > config kernel root on wd0 > > controller isa0 > controller pnp0 > controller eisa0 > controller pci0 > > controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 > disk fd0 at fdc0 drive 0 > disk fd1 at fdc0 drive 1 > > options "CMD640" # work around CMD640 chip deficiency Do you have a controller with a CMD640? If no, remove this. > controller wdc0 at isa? port "IO_WD1" bio irq 14 > disk wd0 at wdc0 drive 0 > disk wd1 at wdc0 drive 1 > > controller wdc1 at isa? port "IO_WD2" bio irq 15 > disk wd2 at wdc1 drive 0 > disk wd3 at wdc1 drive 1 > > options ATAPI #Enable ATAPI support for IDE bus > options ATAPI_STATIC #Don't do it as an LKM > device acd0 #IDE CD-ROM > device wfd0 #IDE Floppy (e.g. LS-120) Do you have an IDE Floppy? This isn't for 1.44s, this is for things like the LS-120. If you don't have one, remove this. > # A single entry for any of these controllers (ncr, ahb, ahc) is > # sufficient for any number of installed devices. > controller ncr0 > controller ahb0 > controller ahc0 > controller isp0 Do you have SCSI cards? If no, remove _all_ of this. If yes, enable only the cards you have. > controller dpt0 > # DPT options > options DPT_RESTRICTED_FREELIST > options DPT_FREELIST_IS_STACK > options DPT_TIMEOUT_FACTOR=4 > options DPT_INTR_DELAY=200 # Some motherboards need that > options DPT_LOST_IRQ > options DPT_RESET_HBA Do you have a RAID array? If not, remove all of this. > ############### > controller adv0 at isa? port ? cam irq ? > controller adw0 > controller bt0 at isa? port ? cam irq ? > controller aha0 at isa? port ? cam irq ? So you have SCSI? If no, remove all of this. If yes, enable only the cards you need. > > controller scbus0 > > device da0 > > #device sa0 > > device pass0 > > device cd0 #Only need one of these, the code dynamically grows All of these are for SCSI as well. > > device wt0 at isa? port 0x300 bio irq 5 drq 1 > device mcd0 at isa? port 0x300 bio irq 10 > controller matcd0 at isa? port 0x230 bio > > device scd0 at isa? port 0x230 bio These are for cdrom drives that are proprietary. If your cdrom doesn't hook up to a soundcard, or is faster than 4X, you probably don't need these. > > # atkbdc0 controlls both the keyboard and the PS/2 mouse > controller atkbdc0 at isa? port IO_KBD tty > device atkbd0 at isa? tty irq 1 > device psm0 at isa? tty irq 12 > > device vga0 at isa? port ? conflicts > > # splash screen/screen saver > pseudo-device splash > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? tty > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > device vt0 at isa? tty > options XSERVER # support for X server > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std You don't use PCVT and syscons. Disable the PCVT stuff. (keep only the device sc0 line) > device npx0 at isa? port IO_NPX irq 13 > > device apm0 at isa? disable flags 0x31 # Advanced Power Management > > device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 > device sio1 at isa? port "IO_COM2" tty irq 3 > device sio2 at isa? disable port "IO_COM3" tty irq 5 > device sio3 at isa? disable port "IO_COM4" tty irq 9 > > # Parallel port > device ppc0 at isa? port? flags 0x40 net irq 7 > controller ppbus0 > device lpt0 at ppbus? > device plip0 at ppbus? > device ppi0 at ppbus? > controller vpo0 at ppbus? > controller vp0 at ppbus? > # > # revision 1.20 of this file. > > device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 > device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000` > device ep0 at isa? port 0x300 net irq 10 > device ex0 at isa? port? net irq? > device fe0 at isa? port 0x300 net irq ? > device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 > device lnc0 at isa? port 0x280 net irq 10 drq 0 > device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 > device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 > device cs0 at isa? port 0x300 net irq ? Don't you dare tell me you have all of these NICs. Remove the ones you don't have. > > pseudo-device loop > pseudo-device ether > pseudo-device sl 1 > pseudo-device ppp 1 > pseudo-device tun 1 > pseudo-device pty 100 > pseudo-device gzip # Exec gzipped a.out's > pseudo-device snp 5 > pseudo-device log > > options MAXCONS=12 You don't need this. > > options SYSVSHM > options SYSVMSG > options SYSVSEM > > pseudo-device bpfilter 4 #Berkeley packet filter > ######################################################## > > any comment will be welcome. Don't expect LINT to give you a working kernel. Strip down GENERIC by removing all of the hardware you don't have, and then use LINT to add hardware that you haven't but isn't in GENERIC. Fix up your kernel, and come back if it still doesn't work. -Dan Papasian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message