Date: Wed, 20 Nov 2002 17:35:53 -0800 From: Arun Sharma <arun@sharma-home.net> To: current@freebsd.org Subject: Re: 5.0-DP2 boot failure on a 440GX motherboard Message-ID: <20021121013553.GA29312@sharma-home.net> In-Reply-To: <20021121003658.GA29026@sharma-home.net> References: <20021121003658.GA29026@sharma-home.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--YZ5djTAD1cGYuMQK
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Wed, Nov 20, 2002 at 04:36:58PM -0800, Arun Sharma wrote:
> This is a dual Pentium III motherboard, with 2 x PIII at 850 MHz.
> 5.0-DP1 worked just fine on this machine. However, with DP2, I get a
> garbled console (Everything is ok till the Timecounter.. message).
>
> Sometimes the CD manages to boot and get into sysinstall, but hangs
> shortly thereafter. Even the sysinstall output is garbled.
boot -v output captured from a serial console attached.
-Arun
--YZ5djTAD1cGYuMQK
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="boot-output.txt"
OK boot -v
SMAP type=01 base=00000000 00000000 len=00000000 0009f400
SMAP type=02 base=00000000 0009f400 len=00000000 00000c00
SMAP type=02 base=00000000 000e8000 len=00000000 00018000
SMAP type=01 base=00000000 00100000 len=00000000 1fef0000
SMAP type=03 base=00000000 1fff0000 len=00000000 0000fc00
SMAP type=04 base=00000000 1ffffc00 len=00000000 00000400
SMAP type=02 base=00000000 fec00000 len=00000000 00010000
SMAP type=02 base=00000000 fee00000 len=00000000 00001000
SMAP type=02 base=00000000 fff80000 len=00000000 00080000
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-DP2 #1: Sat Nov 16 13:38:33 GMT 2002
root@tomcat.bmah.org:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a68000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0a680b4.
Calibrating clock(s) ... TSC clock: 845603651 Hz, i8254 clock: 1193135 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 845639606 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (845.64-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00a8f000 - 0x1ffe7fff, 525701120 bytes (128345 pages)
avail memory = 510541824 (486 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6c20
bios32: Entry = 0xfd7e3 (c00fd7e3) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd680+0x430
pnpbios: Found PnP BIOS data at 0xc00f6c50
pnpbios: Entry = f0000:ad32 Rev = 1.0
Other BIOS signatures found:
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc062e588
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086)
Using $PIR table, 12 entries at 0xc00fdf00
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 16 A 0x60 3 4 5 7 10 11 12 14 15
slot 1 0 16 B 0x65 3 4 5 7 10 11 12 14 15
slot 1 0 16 C 0x66 3 4 5 7 10 11 12 14 15
slot 1 0 16 D 0x67 3 4 5 7 10 11 12 14 15
slot 2 0 13 A 0x61 3 4 5 7 10 11 12 14 15
slot 2 0 13 B 0x66 3 4 5 7 10 11 12 14 15
slot 2 0 13 C 0x67 3 4 5 7 10 11 12 14 15
slot 2 0 13 D 0x65 3 4 5 7 10 11 12 14 15
embedded 0 12 A 0x63 3 4 5 7 10 11 12 14 15
embedded 0 12 B 0x63 3 4 5 7 10 11 12 14 15
slot 3 0 11 A 0x62 3 4 5 7 10 11 12 14 15
slot 3 0 11 B 0x67 3 4 5 7 10 11 12 14 15
slot 3 0 11 C 0x65 3 4 5 7 10 11 12 14 15
slot 3 0 11 D 0x66 3 4 5 7 10 11 12 14 15
embedded 0 14 A 0x65 3 4 5 7 10 11 12 14 15
slot 4 0 9 A 0x63 3 4 5 7 10 11 12 14 15
slot 4 0 9 B 0x65 3 4 5 7 10 11 12 14 15
slot 4 0 9 C 0x66 3 4 5 7 10 11 12 14 15
slot 4 0 9 D 0x67 3 4 5 7 10 11 12 14 15
embedded 0 18 D 0x65 3 4 5 7 10 11 12 14 15
embedded 0 1 A 0x65 3 4 5 7 10 11 12 14 15
embedded 0 1 B 0x66 3 4 5 7 10 11 12 14 15
embedded 0 1 C 0x67 3 4 5 7 10 11 12 14 15
embedded 0 1 D 0x64 3 4 5 7 10 11 12 14 15
embedded 0 15 A 0x65 3 4 5 7 10 11 12 14 15
embedded 0 15 B 0x66 3 4 5 7 10 11 12 14 15
embedded 0 15 C 0x67 3 4 5 7 10 11 12 14 15
embedded 0 15 D 0x64 3 4 5 7 10 11 12 14 15
slot 5 255 4 A 0x64 3 4 5 7 10 11 12 14 15
slot 5 255 4 B 0x65 3 4 5 7 10 11 12 14 15
slot 5 255 4 C 0x66 3 4 5 7 10 11 12 14 15
slot 5 255 4 D 0x67 3 4 5 7 10 11 12 14 15
slot 6 255 7 A 0x67 3 4 5 7 10 11 12 14 15
slot 6 255 7 B 0x64 3 4 5 7 10 11 12 14 15
slot 6 255 7 C 0x65 3 4 5 7 10 11 12 14 15
slot 6 255 7 D 0x66 3 4 5 7 10 11 12 14 15
pcib0: <Intel 82443GX host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x71a0, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x71a1, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x84 (33000 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base f5000000, size 24, enabled
map[14]: type 4, range 32, base 00002000, size 8, enabled
map[18]: type 1, range 32, base f4100000, size 12, enabled
found-> vendor=0x1002, dev=0x4750, revid=0x5c
bus=0, slot=11, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 00002400, size 8, enabled
map[14]: type 1, range 64, base f4101000, size 12, enabled
found-> vendor=0x9005, dev=0x005f, revid=0x00
bus=0, slot=12, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0113, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 00002800, size 8, enabled
map[14]: type 1, range 64, base f4102000, size 12, enabled
found-> vendor=0x9005, dev=0x005f, revid=0x00
bus=0, slot=12, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0113, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x27 (9750 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base f4103000, size 12, enabled
map[14]: type 4, range 32, base 00002c00, size 6, enabled
map[18]: type 1, range 32, base f4000000, size 20, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=14, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=18, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002c60, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=18, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002c40, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=18, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[90]: type 4, range 32, base 00001040, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=18, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base f6000000, size 25, memory disabled
map[14]: type 1, range 32, base f4104000, size 12, enabled
found-> vendor=0x1013, dev=0x00bc, revid=0x23
bus=0, slot=20, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0004, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x0a (2500 ns)
agp0: <Intel 82443GX host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0
on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 2
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1011, dev=0x0023, revid=0x06
bus=1, slot=15, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0307, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0xf0 (7200 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
pcib2: <PCI-PCI bridge> at device 15.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
pci0: <display, VGA> at device 11.0 (no driver attached)
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000
-0xf4101fff irq 10 at device 12.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 416 instructions downloaded
aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2800-0x28ff mem 0xf4102000
-0xf4102fff irq 10 at device 12.1 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 416 instructions downloaded
aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2c00-0x2c3f mem 0xf4000000-0xf40f
ffff,0xf4103000-0xf4103fff irq 5 at device 14.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:d0:b7:89:90:60
fxp0: PCI IDs: 8086 1229 8086 3000 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
isab0: <PCI-ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x2c60-0x2c6f at device 18.1 on pci
0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x2c60
ata0: mask=03 ostat0=50 ostat2=50
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=50
ata0-master: ATA 01 a5
ata0-slave: ATA 01 a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x2c68
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 7f 7f
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2c40-0x2c5f irq 5 at dev
ice 18.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 18.3 (no driver attached)
pci0: <display, VGA> at device 20.0 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 19 devices, largest 178 bytes
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0xc00-0xc3f, size=0x40, align=0x1
PNP0c02: adding io range 0xca0-0xca3, size=0x4, align=0x1
PNP0c02: adding io range 0xcb8-0xcbf, size=0x8, align=0x1
PNP0c02: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1
PNP0c02: adding io range 0x2c-0x2f, size=0x4, align=0x1
PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1
PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1
PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1
PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1
PNP0c02: adding io range 0x50-0x53, size=0x4, align=0x1
PNP0c02: adding io range 0x63-0x63, size=0x1, align=0x1
PNP0c02: adding io range 0x65-0x65, size=0x1, align=0x1
PNP0c02: adding io range 0x67-0x67, size=0x1, align=0x1
PNP0c02: adding io range 0x72-0x7f, size=0xe, align=0x1
PNP0c02: adding io range 0x90-0x9f, size=0x10, align=0x1
PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1
PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1
PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1
PNP0c02: adding io range 0xb0-0xb5, size=0x6, align=0x1
PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1
PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe8000-0xfffff, size=0x18000
PNP0c01: adding fixed memory32 range 0x100000-0x1fffffff, size=0x1ff00000
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 4 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x1000-0x103f, size=0x40, align=0x1
PNP0c02: adding io range 0x1040-0x104f, size=0x10, align=0x1
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c02: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xc9800-0xcbfff, size=0x2800
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 18 device ID PNP0501 (0105d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 19 device ID PNP0f13 (130fd041)
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x8
pnpbios: handle 20 device ID PNP0501 (0105d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 21 device ID PNP0700 (0007d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0 failed to probe on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f
0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x403 0x413 0x403 0x403
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x403 0x40b 0x403 0x403
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x80 specified. Nearest valid baseport is 0x100. Fail
ing probe.
adv1: Invalid baseport of 0x10 specified. Nearest valid baseport is 0x100. Fail
ing probe.
unknown: <PNP0200> can't assign resources (port)
unknown: <PNP0200> at port 0x81-0x8f,0-0xf on isa0
adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Fail
ing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Fail
ing probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Fail
ing probe.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Fail
ing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Fail
ing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Fai
ling probe.
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1 on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
ahc0: Someone reset channel A
GEOM: new disk md0
Ignoring known bogus MBR #1
GEOM: Configure md0a, start 0 length 4423680 end 4423679
GEOM: Configure md0c, start 0 length 4423680 end 4423679
ad0: success setting UDMA2 on Intel chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <WDC WD205BA/16.13M16> ATA-4 disk at ata0-master
ad0: 19574MB (40088160 sectors), 39770 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad1: success setting UDMA2 on Intel chip
MBR Slice 1 on ad0:
0000 80 01 01 00 83 fe 3f 05 3f 00 00 00 47 78 01 00 |......?.?...Gx..|
[0] f:80 typ:131 s(CHS):0/1/1 e(CHS):5/254/63 s:63 l:96327
GEOM: Add ad0s1, start 32256 length 49319424 end 49351679
MBR Slice 2 on ad0:
0000 00 00 01 06 83 fe ff ff 86 78 01 00 2c 4f 83 01 |.........x..,O..|
[1] f:0
--YZ5djTAD1cGYuMQK--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021121013553.GA29312>