Date: Wed, 20 Nov 2002 19:56:22 +0100 From: Michel Gravey <admin@the-e-management.com> To: freebsd-stable@freebsd.org Cc: mux@freebsd.org Subject: pcn problem Message-ID: <1037818582.3ddbdad6e06c5@imp.e-management-consulting.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hi, Got strange problem with a pcn card on a freebsd stable box. Cvsup from 17 november. Can ping 192.168.0.3 (local card) but no external computer (sent to: host is down). It actually never works ( on 4.7-RELEASE ). The card was perfectly working before (under linux 2.4). Attached dmesg and ifconfig. Thanks for your help, Michel Gravey -- Sysadmin and Webmaster phone: +33(0)682837863 fax: +33(0)296489681 ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ [-- Attachment #2 --] Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.7-STABLE #2: Sun Nov 17 22:28:27 GMT 2002 root@kayak.wfbreizh.dyns.cx:/usr/src/sys/compile/KAYAK Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (300.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x633 Stepping = 3 Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX> real memory = 335544320 (327680K bytes) avail memory = 322093056 (314544K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc03f0000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 10 entries at 0xc00fdf20 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard IOAPIC #0 intpin 19 -> irq 2 IOAPIC #0 intpin 16 -> irq 10 IOAPIC #0 intpin 18 -> irq 11 pci0: <PCI bus> on pcib0 pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xbcb0-0xbcbf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xbce0-0xbcff irq 2 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Genesys Logic USB Mouse, rev 1.00/1.01, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "PIIX" frequency 3579545 Hz chip1: <Intel 82371AB Power management controller> port 0x8800-0x880f at device 7.3 on pci0 ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xb800-0xb8ff mem 0xfedff000-0xfedfffff irq 10 at device 8.0 on pci0 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs ahc1: <Adaptec aic7860 Ultra SCSI adapter> port 0xb400-0xb4ff mem 0xfedfe000-0xfedfefff irq 2 at device 9.0 on pci0 aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0xbcc0-0xbcdf mem 0xfedfdc00-0xfedfdc1f irq 11 at device 17.0 on pci0 pcn0: Ethernet address: 00:60:b0:cc:bc:09 miibus0: <MII bus> on pcn0 lxtphy0: <LXT970 10/100 media interface> on miibus0 lxtphy0: 100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROMs> at iomem 0xc0000-0xcb7ff,0xcb800-0xcffff,0xd0000-0xd47ff on isa0 ep0: <3Com 3C509-TPO EtherLink III> at port 0x300-0x30f irq 10 on isa0 ep0: No irq?! ep0: ep_alloc() failed! (6) device_probe_and_attach: ep0 attach returned 6 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ep1: <3Com 3C509B-TPO EtherLink III (PnP)> at port 0x210-0x21f irq 5 on isa0 ep1: Ethernet address 00:60:08:09:56:28 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/da0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST34501W 8301> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4339MB (8887200 512 byte sectors: 255H 63S/T 553C) da1 at ahc1 bus 0 target 0 lun 0 da1: <SEAGATE ST32550N SUN2.1G 0412> Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da1: 2048MB (4194995 512 byte sectors: 255H 63S/T 261C) pid 121 (ldconfig), uid 0 on /usr: file system full pid 142 (tcsh), uid 1000 on /usr: file system full pcn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.0.3 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:60:b0:cc:bc:09 media: Ethernet autoselect (100baseTX) status: active ep1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.0.4 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:60:08:09:56:28 media: Ethernet 10baseT/UTP sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1037818582.3ddbdad6e06c5>