From owner-freebsd-questions  Tue Dec 12  4: 6: 0 2000
From owner-freebsd-questions@FreeBSD.ORG  Tue Dec 12 04:05:57 2000
Return-Path: <owner-freebsd-questions@FreeBSD.ORG>
Delivered-To: freebsd-questions@freebsd.org
Received: from echonyc.com (echonyc.com [198.67.15.2])
	by hub.freebsd.org (Postfix) with ESMTP id 7D70837B402
	for <freebsd-questions@FreeBSD.ORG>; Tue, 12 Dec 2000 04:05:57 -0800 (PST)
Received: from localhost (suleyman@localhost)
	by echonyc.com (8.11.0/8.11.0) with ESMTP id eBCC5u310950
	for <freebsd-questions@FreeBSD.ORG>; Tue, 12 Dec 2000 07:05:56 -0500 (EST)
Date: Tue, 12 Dec 2000 07:05:56 -0500 (EST)
From: Ken Seggerman <suleyman@echonyc.com>
To: freebsd-questions@FreeBSD.ORG
Subject: netatalk running but nothing in chooser
Message-ID: <Pine.GSO.4.21.0012120643070.8112-100000@echonyc.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-questions@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.ORG

Greetings:

I am running netatalk-1.4b2+asun2.1.3 on FreeBSD 4.1-RC.
atalkd and afpd seem to be running ok, but nothing shows up
in the chooser of the mac I have connected to my LAN.

Nothing shows up when I go to the AppleTalk control panel, and when I try
to open Network Browser, it hangs and I have to reboot the mac.

I have been to all of the netatalk sites, but still have no idea what to
do.

My atalkd.conf file reads as follows:

xl0 -phase 2 -net 0-65534 -addr 65280.13

adding a named zone ( -zone "myZone") doesn't help

my /usr/local/etc/AppleVolumes.system file looks ok.

my /etc/services file seems to have everything required by netatalk.

my xl0 interface seems ok:

xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 10.0.0.4 netmask 0xffffff00 broadcast 10.0.0.255
        inet6 fe80::250:daff:fe1a:e000%xl0 prefixlen 64 scopeid 0x1 
        atalk 65280.13 range 0-65534 phase 2 broadcast 0.255
        ether 00:50:da:1a:e0:00 
        media: autoselect (100baseTX <full-duplex>) status: active
        supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback>

Any help would be very welcome.

thanks,

ken_seggerman@suleyman.com




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message