Date: Tue, 2 May 2017 02:53:42 -0700 From: Mark Millard <markmi@dsl-only.net> To: Andrew Turner <andrew@fubar.geek.nz> Cc: freebsd-arm <freebsd-arm@freebsd.org>, FreeBSD Current <freebsd-current@freebsd.org>, Tom Vijlbrief <tvijlbrief@gmail.com>, "O. Hartmann" <o.hartmann@walstatt.org> Subject: Re: FYI: [My FreeBSD-12.0-CURRENT-arm64-aarch64.raw ] under qemu-system-aarch64 on odroid-c2 under UbuntuMate : [A combination that boots] Message-ID: <85D4E274-07FC-4E92-8A23-99712FB50707@dsl-only.net> In-Reply-To: <9D0414D3-7A48-4C37-8710-1AFAA5E2874E@dsl-only.net> References: <FF5D8468-CE04-411A-9F3C-10EF5F21D9E5@dsl-only.net> <D2E876BD-A23F-4C33-A0B6-8F1A862C11D6@fubar.geek.nz> <47F6A67D-2D97-4992-96CE-45751190CA86@dsl-only.net> <61C08AFE-0BE8-4BDE-B50C-09268850AE21@fubar.geek.nz> <9D0414D3-7A48-4C37-8710-1AFAA5E2874E@dsl-only.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2017-Apr-30, at 10:15 AM, Mark Millard <markmi@dsl-only.net> wrote: > On 2017-Apr-30, at 9:40 AM, Andrew Turner <andrew at fubar.geek.nz> = wrote: >=20 >>> On 30 Apr 2017, at 12:02, Mark Millard <markmi at dsl-only.net> = wrote: >>> . . . >>=20 >> No, the device tree blob comes from UEFI. It seems the current UEFI = only provides the ACPI tables, and not a DTB. >=20 > So you are expecting that the older QEMU_EFI.fd I had > used before provided some sort of fairly generic dtb > (relative to qemu, fairly independent of the host > that was running qemu). Interesting. Thanks again. > . . . > qemu-system-aarch64 -m 1024M -enable-kvm -cpu host -M virt \ > -bios QEMU_EFI.fd -nographic \ > -drive = format=3Draw,if=3Dnone,file=3DFreeBSD-12.0-CURRENT-arm64-aarch64-20170420-= r317181.raw,id=3Dhd0 \ > -device virtio-blk-device,drive=3Dhd0 \ > -device virtio-net-device,netdev=3Dnet0 \ > -netdev user,id=3Dnet0 \ > -smp cpus=3D4 >=20 > based on: >=20 > = http://snapshots.linaro.org/components/kernel/leg-virt-tianocore-edk2-upst= ream/1917/QEMU-AARCH64/RELEASE_CLANG35/QEMU_EFI.fd Using the following instead lead to booting all the way and being able to login: = https://releases.linaro.org/components/kernel/uefi-linaro/16.02/release/qe= mu64/QEMU_EFI.fd So you were definitely correct. > but this time based on my build of head -r317015 . This combination seemed more stable than the one from back in 2016-Sept. I strongly expect that the official snapshot would boot based on this alternate QEMU_EFI.fd as well, but I've not tried that combination. The boot still gets: usb_needs_explore_all: no devclass during the boot but it does not hang after that message. I have not gotten networking going in FreeBSD in the quick try that I made. So I still do not have a /usr/src in place to try with a buildworld buildkernel . Here is a boot log: >> FreeBSD EFI boot block Loader path: /boot/loader.efi Initializing modules: ZFS UFS Probing 6 block devices.......*. done ZFS found no pools UFS found 1 partition Consoles: EFI console =20 Command line arguments: loader.efi Image base: 0x79c13000 EFI version: 2.60 EFI Firmware: EDK II (rev 1.00) FreeBSD/arm64 EFI loader, Revision 1.1 EFI boot environment Loading /boot/defaults/loader.conf /boot/kernel/kernel text=3D0x7ba068 data=3D0x9e6f8+0x39c3fe = syms=3D[0x8+0x103b60+0x8+0xf8a79] /boot/entropy size=3D0x1000 Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... =20 Using DTB provided by EFI at 0x7ffdd000. KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-CURRENT r317015M arm64 FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on = LLVM 4.0.0) VT: init without driver. Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: unblocking device. random: entropy device external interface kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 clk_fixed0: <Fixed clock> on ofwbus0 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 gic0: <ARM Generic Interrupt Controller> mem = 0x8000000-0x800ffff,0x8010000-0x801ffff on ofwbus0 gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 288 gicv2m0: <ARM Generic Interrupt Controller MSI/MSIX> mem = 0x8020000-0x8020fff on gic0 generic_timer0: <ARMv7 Generic Timer> irq 34,35,36,37 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 virtio_mmio0: <VirtIO MMIO adapter> mem 0xa000000-0xa0001ff irq 0 on = ofwbus0 virtio_mmio1: <VirtIO MMIO adapter> mem 0xa000200-0xa0003ff irq 1 on = ofwbus0 virtio_mmio2: <VirtIO MMIO adapter> mem 0xa000400-0xa0005ff irq 2 on = ofwbus0 virtio_mmio3: <VirtIO MMIO adapter> mem 0xa000600-0xa0007ff irq 3 on = ofwbus0 virtio_mmio4: <VirtIO MMIO adapter> mem 0xa000800-0xa0009ff irq 4 on = ofwbus0 virtio_mmio5: <VirtIO MMIO adapter> mem 0xa000a00-0xa000bff irq 5 on = ofwbus0 virtio_mmio6: <VirtIO MMIO adapter> mem 0xa000c00-0xa000dff irq 6 on = ofwbus0 virtio_mmio7: <VirtIO MMIO adapter> mem 0xa000e00-0xa000fff irq 7 on = ofwbus0 virtio_mmio8: <VirtIO MMIO adapter> mem 0xa001000-0xa0011ff irq 8 on = ofwbus0 virtio_mmio9: <VirtIO MMIO adapter> mem 0xa001200-0xa0013ff irq 9 on = ofwbus0 virtio_mmio10: <VirtIO MMIO adapter> mem 0xa001400-0xa0015ff irq 10 on = ofwbus0 virtio_mmio11: <VirtIO MMIO adapter> mem 0xa001600-0xa0017ff irq 11 on = ofwbus0 virtio_mmio12: <VirtIO MMIO adapter> mem 0xa001800-0xa0019ff irq 12 on = ofwbus0 virtio_mmio13: <VirtIO MMIO adapter> mem 0xa001a00-0xa001bff irq 13 on = ofwbus0 virtio_mmio14: <VirtIO MMIO adapter> mem 0xa001c00-0xa001dff irq 14 on = ofwbus0 virtio_mmio15: <VirtIO MMIO adapter> mem 0xa001e00-0xa001fff irq 15 on = ofwbus0 virtio_mmio16: <VirtIO MMIO adapter> mem 0xa002000-0xa0021ff irq 16 on = ofwbus0 virtio_mmio17: <VirtIO MMIO adapter> mem 0xa002200-0xa0023ff irq 17 on = ofwbus0 virtio_mmio18: <VirtIO MMIO adapter> mem 0xa002400-0xa0025ff irq 18 on = ofwbus0 virtio_mmio19: <VirtIO MMIO adapter> mem 0xa002600-0xa0027ff irq 19 on = ofwbus0 virtio_mmio20: <VirtIO MMIO adapter> mem 0xa002800-0xa0029ff irq 20 on = ofwbus0 virtio_mmio21: <VirtIO MMIO adapter> mem 0xa002a00-0xa002bff irq 21 on = ofwbus0 virtio_mmio22: <VirtIO MMIO adapter> mem 0xa002c00-0xa002dff irq 22 on = ofwbus0 virtio_mmio23: <VirtIO MMIO adapter> mem 0xa002e00-0xa002fff irq 23 on = ofwbus0 virtio_mmio24: <VirtIO MMIO adapter> mem 0xa003000-0xa0031ff irq 24 on = ofwbus0 virtio_mmio25: <VirtIO MMIO adapter> mem 0xa003200-0xa0033ff irq 25 on = ofwbus0 virtio_mmio26: <VirtIO MMIO adapter> mem 0xa003400-0xa0035ff irq 26 on = ofwbus0 virtio_mmio27: <VirtIO MMIO adapter> mem 0xa003600-0xa0037ff irq 27 on = ofwbus0 virtio_mmio28: <VirtIO MMIO adapter> mem 0xa003800-0xa0039ff irq 28 on = ofwbus0 virtio_mmio29: <VirtIO MMIO adapter> mem 0xa003a00-0xa003bff irq 29 on = ofwbus0 virtio_mmio30: <VirtIO MMIO adapter> mem 0xa003c00-0xa003dff irq 30 on = ofwbus0 vtnet0: <VirtIO Networking Adapter> on virtio_mmio30 vtnet0: Ethernet address: 52:54:00:12:34:56 virtio_mmio31: <VirtIO MMIO adapter> mem 0xa003e00-0xa003fff irq 31 on = ofwbus0 vtblk0: <VirtIO Block Adapter> on virtio_mmio31 vtblk0: 32768MB (67110465 512 byte sectors) pcib0: <Generic PCI host controller> mem 0x3f000000-0x3fffffff on = ofwbus0 pci0: <PCI bus> on pcib0 uart0: <PrimeCell UART (PL011)> mem 0x9000000-0x9000fff irq 33 on = ofwbus0 uart0: console (9600,n,8,1) cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 cpu1: <Open Firmware CPU> on cpulist0 cpu2: <Open Firmware CPU> on cpulist0 cpu3: <Open Firmware CPU> on cpulist0 cryptosoft0: <software crypto> Timecounters tick every 10.000 msec usb_needs_explore_all: no devclass Release APs CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Instruction Set Attributes 0 =3D <CRC32> Instruction Set Attributes 1 =3D <0> Processor Features 0 =3D <AdvSIMD,Float,EL3 32,EL2 32,EL1 = 32,EL0 32> Processor Features 1 =3D <0> Memory Model Features 0 =3D <4k Granule,64k = Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA> Memory Model Features 1 =3D <> Debug Features 0 =3D <2 CTX Breakpoints,4 Watchpoints,6 = Breakpoints,PMUv3,Debug v8> Debug Features 1 =3D <0> Auxiliary Features 0 =3D <0> Auxiliary Features 1 =3D <0> CPU 1: ARM Cortex-A53 r0p4 affinity: 1 CPU 2: ARM Cortex-A53 r0p4 affinity: 2 CPU 3: ARM Cortex-A53 r0p4 affinity: 3 Trying to mount root from ufs:/dev/ufs/rootfs [rw]... warning: no time-of-day clock registered, system time will not be set = accurately Setting hostuuid: 5f6ed2d1-2dcc-11e7-b81e-f171534e5634. Setting hostid: 0x9f2fff5d. Starting file system checks: /dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/rootfs: clean, 6154717 free (4485 frags, 768779 blocks, 0.1% = fragmentation) Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat Setting hostname: ODC2FBSD. Setting up harvesting: = [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATT= ACH,CACHED Feeding entropy: . Starting Network: lo0 vtnet0. lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3D600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128=20 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2=20 inet 127.0.0.1 netmask 0xff000000=20 groups: lo=20 nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> vtnet0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3D80028<VLAN_MTU,JUMBO_MTU,LINKSTATE> ether 52:54:00:12:34:56 media: Ethernet 10Gbase-T <full-duplex> status: active nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> Starting devd. Starting Network: vtnet0. vtnet0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3D80028<VLAN_MTU,JUMBO_MTU,LINKSTATE> ether 52:54:00:12:34:56 media: Ethernet 10Gbase-T <full-duplex> status: active nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> add host 127.0.0.1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Creating and/or trimming log files. Starting syslogd. No core dumps found. Clearing /tmp (X related). Updating motd:. Mounting late filesystems:. Starting sendmail_submit. Starting sendmail_msp_queue. Starting cron. Starting background file system checks in 60 seconds. Sun Apr 30 18:41:18 UTC 2017 FreeBSD/arm64 (ODC2FBSD) (ttyu0) login:=20 =3D=3D=3D Mark Millard markmi at dsl-only.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?85D4E274-07FC-4E92-8A23-99712FB50707>