Date: Tue, 1 Jun 1999 20:10:29 -0400 From: "Christopher J. Michaels" <cjm2@earthling.net> To: "FreeBSD Mailing List" <questions@FreeBSD.org> Subject: trafshow: SIOCGIFFLAGS: ¼Ø¿¿: Device not configured Message-ID: <001e01beac8c$5264f6e0$0200000a@shithead.weeble.dyndns.org>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_001F_01BEAC6A.CB5356E0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
I am now getting the following error when running trafshow. I honestly
don't know when it began, because I didn't re-install trafshow until after
I did a 'make world'.
The error is:
trafshow: SIOCGIFFLAGS: ¼Ø¿¿: Device not configured
I am running:
FreeBSD cartman.weeble.dyndns.org 3.2-STABLE FreeBSD 3.2-STABLE #0: Sun
May 30 10:47:47 GMT 1999
cjm2@cartman.weeble.dyndns.org:/usr/src/sys/compile/CARTMAN i386
typing 'trafshow -i fxp0' works just fine.
-Chris
"f u cn rd ths, u cn gt a gd jb n cmptr prgrmmng."
------=_NextPart_000_001F_01BEAC6A.CB5356E0
Content-Type: text/plain;
name="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.txt"
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-STABLE #0: Sun May 30 10:47:47 GMT 1999
cjm2@cartman.weeble.dyndns.org:/usr/src/sys/compile/CARTMAN
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x580 Stepping=3D0
Features=3D0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory =3D 67108864 (65536K bytes)
config> pnp 1 0 os irq0 3 irq1 4 drq0 4 drq1 4 port0 0x2F8 port1 0x3F8
config> pnp 1 enable
config> q
avail memory =3D 62906368 (61432K bytes)
Preloaded elf kernel "kernel" at 0xc0242000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc024209c.
Probing for devices on PCI bus 0:
chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x04 on pci0.0.0
chip1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI bridge> rev 0x00 on pci0.1.0
chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0
ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on =
pci0.7.1
chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 9 on =
pci0.8.0
fxp0: Ethernet address 00:90:27:37:22:7f
vga0: <Trident model 9660 VGA-compatible display device> rev 0xd3 int a =
irq 10 on pci0.10.0
Probing for devices on PCI bus 1:
Probing for PnP devices:
CSN 1 Vendor ID: USR3031 [0x31307256] Serial 0xb0d0c3a5 Comp ID: @@@0000 =
[0x00000000]
sio4: type 16550A
sio4 (siopnp <USR3031> sn 0xb0d0c3a5) at 0x2f8-0x2ff irq 3 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=3D0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 8250
sio1 not probed due to I/O address conflict with sio4 at 0x2f8
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <ST36451A>, DMA, 32-bit, multi-block-16
wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa
wdc1: unit 0 (wd2): <FUJITSU MPA3052ATU>, DMA, 32-bit, multi-block-32
wd2: 5006MB (10253250 sectors), 10850 cyls, 15 heads, 63 S/T, 512 B/S
wdc1: unit 1 (wd3): <WDC AC310200R>, DMA, 32-bit, multi-block-16
wd3: 9787MB (20044080 sectors), 19885 cyls, 16 heads, 63 S/T, 512 B/S
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppb0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 720C> SCP,VLINK
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd0s1a
vinum: loaded
wd3: reverting to PIO mode reading fsbn 0 (status 51<rdy,seekdone,err> =
error 84<badblk,abort>)
vinum: reading configuration from /dev/wd3a
vinum: updating configuration from /dev/wd2a
vinum: updating configuration from /dev/wd0h
fxp0: promiscuous mode enabled
fxp0: promiscuous mode enabled
fxp0: promiscuous mode enabled
fxp0: promiscuous mode enabled
------=_NextPart_000_001F_01BEAC6A.CB5356E0--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001e01beac8c$5264f6e0$0200000a>