Date: Sat, 21 Mar 2015 14:31:38 -0700 From: Russell Haley <russ.haley@gmail.com> To: Rui Paulo <rpaulo@me.com> Cc: Tim Kientzle <tim@kientzle.com>, freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: Digi-CCWMX53 - u-boot Message-ID: <CABx9NuRhwfW=AZ%2BLUnQ4f2yzO-cf%2BbNX28BZqP6KCs5xKf-G-g@mail.gmail.com> In-Reply-To: <622469F8-C245-4E84-B5E1-FE360D3C9B4C@me.com> References: <CABx9NuQZe3k%2BAtRxtUg5k3=5jM20RQdgnwpuKr9uc07VY1C1EQ@mail.gmail.com> <622469F8-C245-4E84-B5E1-FE360D3C9B4C@me.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for getting back to me Rui, I have done the following bit of flailing around: - updated my userland to 1100065 - Installed arm-none-eabi from pkgng as Mr. Lepore has indicated - installed the latest gcc (gcc48?) - I have since built the xdev target as well. - Installed mpc - setenv LD_LIBRARY_PATH "/usr/local/lib" - ldconfig So after much faffing about I've tried a whole bunch of combinations: gmake HOSTCC=gcc48 CROSS_COMPILE=arm-none-eabi- gmake HOSTCC=gcc48 CROSS_COMPILE=armv6-freebsd- gmake SED=gsed HOSTCC=cc CROSS_COMPILE=armv6-freebsd- gmake SED=gsed HOSTCC=gcc48 CROSS_COMPILE=arm-none-eabi- All with the same result: for dir in tools examples/standalone examples/api ; do gmake -C $dir _depend ; done gmake[1]: Entering directory '/usr/uboot/tools' gmake[1]: Nothing to be done for '_depend'. gmake[1]: Leaving directory '/usr/uboot/tools' gmake[1]: Entering directory '/usr/uboot/examples/standalone' gmake[1]: Nothing to be done for '_depend'. gmake[1]: Leaving directory '/usr/uboot/examples/standalone' gmake[1]: Entering directory '/usr/uboot/examples/api' gmake[1]: Nothing to be done for '_depend'. gmake[1]: Leaving directory '/usr/uboot/examples/api' gmake -C tools all gmake[1]: Entering directory '/usr/uboot/tools' gcc48 -g -Wall -idirafter /usr/uboot/include -idirafter /usr/uboot/include2 -idirafter /usr/uboot/include -I /usr/uboot/libfdt -I /usr/uboot/tools -DTEXT_BASE=0x77800000 -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -O -c -o fdt.o gcc48: fatal error: no input files compilation terminated. Makefile:231: recipe for target 'fdt.o' failed gmake[1]: *** [fdt.o] Error 1 gmake[1]: Leaving directory '/usr/uboot/tools' Makefile:402: recipe for target 'tools' failed gmake: *** [tools] Error 2 I'm trying to interpret what I'm seeing but I'm still a long way off of solving this stuff myself. interestingly I've managed to tweak something. If I re-open a shell to my jail, vim now fails with the error "Shared object "libpng16.so.16" not found, required by "libgdk_pixbuf-2.0.so.0"" unless I execute # setenv LD_LIBRARY_PATH "/usr/local/lib" Go figure. Thanks, Russ Russ On Fri, Mar 20, 2015 at 6:54 PM, Rui Paulo <rpaulo@me.com> wrote: > On 19 Mar 2015, at 16:11, Russell Haley <russ.haley@gmail.com> wrote: >> >> Rui, >> >> I am finally at a point where I can compile your u-boot fork for the >> Digi-CCWMX53 dev kit but I am getting the following error: >> >> # gmake SED=gsed HOSTCC=cc CROSS_COMPILE=arm-none-eabi- >> for dir in tools examples/standalone examples/api ; do gmake -C $dir >> _depend ; done >> gmake[1]: Entering directory '/usr/uboot/tools' >> gmake[1]: Nothing to be done for '_depend'. >> gmake[1]: Leaving directory '/usr/uboot/tools' >> gmake[1]: Entering directory '/usr/uboot/examples/standalone' >> gmake[1]: Nothing to be done for '_depend'. >> gmake[1]: Leaving directory '/usr/uboot/examples/standalone' >> gmake[1]: Entering directory '/usr/uboot/examples/api' >> gmake[1]: Nothing to be done for '_depend'. >> gmake[1]: Leaving directory '/usr/uboot/examples/api' >> gmake -C tools all >> gmake[1]: Entering directory '/usr/uboot/tools' >> cc -g -Wall -idirafter /usr/uboot/include -idirafter >> /usr/uboot/include2 -idirafter /usr/uboot/include -I /usr/uboot/libfdt >> -I /usr/uboot/tools -DTEXT_BASE=0x77800000 -DUSE_HOSTCC >> -D__KERNEL_STRICT_NAMES -O -c -o fdt.o >> cc: error: no input files >> Makefile:231: recipe for target 'fdt.o' failed >> gmake[1]: *** [fdt.o] Error 1 >> gmake[1]: Leaving directory '/usr/uboot/tools' >> Makefile:402: recipe for target 'tools' failed >> gmake: *** [tools] Error 2 > > Hmm. Have you tried building with gcc? > > -- > Rui Paulo > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CABx9NuRhwfW=AZ%2BLUnQ4f2yzO-cf%2BbNX28BZqP6KCs5xKf-G-g>