Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 16 Nov 2006 14:51:13 -0000
From:      "Lawrence Farr" <freebsd-smp@epcdirect.co.uk>
To:        <freebsd-stable@freebsd.org>
Subject:   RE: Areca Weirdness 
Message-ID:  <003d01c7098e$a96716a0$c806a8c0@lfarr>
In-Reply-To: <070f01c704bc$d66933d0$0200a8c0@lfarr>

next in thread | previous in thread | raw e-mail | index | archive | help
Re-posting to -STABLE as it also does it on i386.

I reinstalled i386 stable as of yesterday, and newfs'd all the partitions
"just in case". I got it to crash while doing a mkdir on the areca
partition, so set up crash dumps on the boot drive (it boots off a single
ATA disk, the Areca is additional storage) and it died again running
the periodic scripts last night. The info file from the dump shows:

Dump header from device /dev/ad0s1b
  Architecture: i386
  Architecture Version: 2
  Dump Length: 2145452032B (2046 MB)
  Blocksize: 512
  Dumptime: Thu Nov 16 03:01:09 2006
  Hostname: nas-2.shorewood-epc.co.uk
  Magic: FreeBSD Kernel Dump
  Version String: FreeBSD 6.1-20061115 #0: Wed Nov 15 04:18:11 UTC 2006
    root@monitor.shorewood-epc.co.uk:/usr/obj/usr/src/sys/SMP
  Panic String: ufs_dirbad: bad dir
  Dump Parity: 632980830
  Bounds: 0
  Dump Status: good

Am I expecting too much with partitions over 2Tb? I've never gone over
2Tb before, so havent come across any issues like this.

> -----Original Message-----
> From: owner-freebsd-amd64@freebsd.org 
> [mailto:owner-freebsd-amd64@freebsd.org] On Behalf Of Lawrence Farr
> Sent: 10 November 2006 11:39
> To: freebsd-amd64@freebsd.org
> Subject: Areca Weirdness 
> 
> I've got an Areca 12 port card running a 6Tb array which is divided
> into 2.1Tb chunks at the moment, as it was doing the same with a
> single 6Tb partition.
> 
> ad0: 58644MB <IC35L060AVER07 0 ER6OA44A> at ata0-master UDMA100
> da0 at arcmsr0 bus 0 target 0 lun 0
> da0: <Areca Arc1 R001> Fixed Direct Access SCSI-3 device
> da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), 
> Tagged Queueing
> Enabled
> da0: 2224922MB (4556640256 512 byte sectors: 255H 63S/T 283637C)
> 
> If I newfs it, and copy data to it, I have no problem initially.
> If I then try and copy the data on the disk already to a new
> folder, the machine reboots (it's a remote host with no serial
> attached currently). When it comes back to life, it mounts, and
> shows as:
> 
> /dev/da0       2.1T    343G    1.6T    18%    /usr/home/areca1
> 
> But is completely empty. Unmounting it and trying to fsck it
> errors, as does mounting it by hand.
> 
> [root@nas-2 /home]# fsck -y /dev/da0
> ** /dev/da0
> Cannot find file system superblock
> ioctl (GCINFO): Inappropriate ioctl for device
> fsck_ufs: /dev/da0: can't read disk label
> [root@nas-2 /home]# mount /dev/da0
> mount: /dev/da0 on /usr/home/areca1: incorrect super block
> 
> Are there any known issues with the driver on AMD64? I had
> major issues with it on Linux/386 with large memory support
> (it would behave equally strangely) that went away when I
> took large memory support out, maybe there are some non 64
> bit safe parts common to both?
> 
> _______________________________________________
> freebsd-amd64@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
> To unsubscribe, send any mail to 
> "freebsd-amd64-unsubscribe@freebsd.org"
> 




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003d01c7098e$a96716a0$c806a8c0>