Date: Sat, 17 Dec 2011 14:02:35 -0600 From: Nathan Whitehorn <nwhitehorn@freebsd.org> To: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> Cc: freebsd-ppc@freebsd.org Subject: Re: iBook G4: moused doesn't work? Message-ID: <4EECF55B.4050100@freebsd.org> In-Reply-To: <20111217202524.9d63255e.torfinn.ingolfsen@broadpark.no> References: <20111211195352.3cf2f767.torfinn.ingolfsen@broadpark.no> <4EE50C4B.5040901@freebsd.org> <20111217202524.9d63255e.torfinn.ingolfsen@broadpark.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/17/11 13:25, Torfinn Ingolfsen wrote: > On Sun, 11 Dec 2011 14:02:19 -0600 > Nathan Whitehorn<nwhitehorn@freebsd.org> wrote: > >> You need to set up moused to point to the touchpad device, atp0. There's >> an example in the atp(4) manpage, but all you need to do is to put the >> following in rc.conf: >> moused_enable="YES" >> moused_port="/dev/atp0" > Ah! (smacks forehead) I must have been low on ebergy that day. > After adding that, the touchpad works. Thanks! > > One question remains: why does FreeBSD fire up a moused for usb (therer are no usb devices attatched that I know of)? > root@kg-ibook# ps ax | grep moused > 1380 ?? Is 0:00.00 /usr/sbin/moused -p /dev/ums0 -t auto -I /var/run/moused.ums0.pid > 2109 ?? Is 0:00.01 /usr/sbin/moused -p /dev/atp0 -t auto > 2150 0 R+ 0:00.00 grep moused (sh) > root@kg-ibook# dmesg | grep ums > ums0:<vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0 > ums0: 5 buttons and [XY] coordinates ID=0 > > root@kg-ibook# usbconfig > ugen0.1:<OHCI root HUB Apple> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE > ugen1.1:<OHCI root HUB NEC> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE > ugen2.1:<OHCI root HUB NEC> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE > ugen3.1:<EHCI root HUB NEC> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE > ugen0.2:<product 0x1000 vendor 0x05ac> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON > ugen0.3:<Apple Internal Trackpad Apple Computer> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON > > > The ums etc. are the bluetooth controller's HID emulation. -Nathan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4EECF55B.4050100>