Date: Tue, 24 Jun 2003 10:43:34 -0400 From: "Chad Stalvey" <cstalvey@hcsmail.com> To: <freebsd-questions@freebsd.org> Subject: Qlogic Fibre Channel Host Adapter Message-ID: <GJEBKKBLALGJOMECFPJPCEMFIFAA.cstalvey@hcsmail.com>
next in thread | raw e-mail | index | archive | help
Hello, I'm needing some help with a QLA2200 Fibre Channel Card on FreeBSD 4.2. I've installed the card and the bios sees the raid 5 partition on our san. When booting I see a warning message of: isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0x3000-0x30ff mem 0xf4200000-0xf4200fff irq 5 at device 4.0 on pci2 isp0: WARNING- cannot determine Expanded LUN capability- limiting to one LUN I'm trying to add the disk through /stand/sysinstall, but fdisk only sees the one local attached drive. I also added the line: ispfs_load="YES" to /boot/loader.conf as I saw that fixed someone else's similar "Lun" problem on another list. I'm thinking I need some drivers for this card? Or am I way off? The only drivers I see on Qlogic's site are that of Redhat, Solaris, and SCO. Are there FreeBSD drivers available? Has anyone else run into this problem? Thanks in advance. Chad Stalvey Systems Engineer Hayes E-Government Resources www.hcs.net 850.297.0551 ext.136 Mobile 508.0485
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?GJEBKKBLALGJOMECFPJPCEMFIFAA.cstalvey>