Date: Sat, 31 Aug 2002 17:03:24 -0700 From: Lars Eggert <larse@ISI.EDU> To: mjacob@feral.com Cc: hackers@FreeBSD.ORG Subject: Re: Ultra320 drivers? Message-ID: <3D71594C.7000400@isi.edu> References: <Pine.BSF.4.21.0208311500580.62623-100000@beppo>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Matthew Jacob wrote:
> I was thinking that the CHS mapping had changed from your original
> settings when you loaded new f/w.
Good and bad news:
Good: Found the boot problem. Turns out that I moved BIOS boot devices
before the SCSI drives in the BIOS, to boot of the LSI firmware floppy.
That made an ATA drive the first drive to be probed. Even though I
cycled through the boot loader chain to the right (SCSI) disk, it then
wouldn't boot. I moved the SCSI drives before the BIOS devices again,
and now it boots fine. (Still strange, since all drives have the 4.6
boot loader installed, but anyway, it boots again.)
Bad: I still get timeouts with the 1.00.12 firmware. And, unlike before,
my drives only attach at 80MB/s - and this is with the patch to
scsi_all.c that I initially forgot yesterday.
At boot time, the 1.00.12 firmware detects my drives as 80MB/s but posts
a note along the lines of "these drives will support 320MB/s once the OS
is loaded". The older version detected them as 320MB/s at boot, and so
did FreeBSD. Windows XP with the 1.00.12 firmware, on the other hand,
runs the drives at 320MB/s (according to the LSI utility).
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xdc00-0xdcff mem
0xff6a0000-0xff6bffff,0xff6c0000-0xff6dffff irq 18 at device 12.0 on pci3
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xd800-0xd8ff mem
0xff660000-0xff67ffff,0xff680000-0xff69ffff irq 19 at device 12.1 on pci3
...
da0 at mpt1 bus 0 target 0 lun 0
da0: <SEAGATE ST336732LW 2223> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da1 at mpt1 bus 0 target 1 lun 0
da1: <SEAGATE ST336732LW 2223> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
Lars
--
Lars Eggert <larse@isi.edu> USC Information Sciences Institute
[-- Attachment #2 --]
0 *H
010 + 0 *H
080fErtcvE.0
*H
010 UZA10UWestern Cape10U Cape Town10U
Thawte Consulting1(0&UCertification Services Division1$0"UThawte Personal Freemail CA1+0) *H
personal-freemail@thawte.com0
000830000000Z
040827235959Z010 UZA10UWestern Cape10U Cape Town10
U
Thawte10UCertificate Services1(0&UPersonal Freemail RSA 2000.8.3000
*H
0 32c %E>nx'gڈD)c5*mp<ܮto034qmOe
KaU5u'rװ|CBPQ<9TIf - ki N0L0)U"0 010UPrivateLabel1-2970U0 0U0
*H
1KG]qSl]y=&b""I'{9$
*8PUl
LGlX1B li+@]jy.%݊
Z<D&iHΥbb090%A0
*H
010 UZA10UWestern Cape10U Cape Town10
U
Thawte10UCertificate Services1(0&UPersonal Freemail RSA 2000.8.300
020824185339Z
030824185339Z0T10
UEggert1
0U*Lars10ULars Eggert10 *H
larse@isi.edu0"0
*H
0
6Fxΰ7aED&0+Dj)ֽXCUcnleijmz~S0J jWV~ 1^({IݛLjӖ
ao:bP}WLVܱ욗cDɖ_Kv.A(W49;Z8-uXE
6b
@_0%#d`Rto5 L0R`w@7
r Hcc U3%7N_o V0T0*+e!0 00L2uMyffBNUbNJJcdZ2s0U0
larse@isi.edu0U0 0
*H
]Ȕ,fK<cjRZeLan@Z6,=
fK?yO#8+ Ni*LSfpQg<(aӒ$kTx_AL1>ގ|S090%A0
*H
010 UZA10UWestern Cape10U Cape Town10
U
Thawte10UCertificate Services1(0&UPersonal Freemail RSA 2000.8.300
020824185339Z
030824185339Z0T10
UEggert1
0U*Lars10ULars Eggert10 *H
larse@isi.edu0"0
*H
0
6Fxΰ7aED&0+Dj)ֽXCUcnleijmz~S0J jWV~ 1^({IݛLjӖ
ao:bP}WLVܱ욗cDɖ_Kv.A(W49;Z8-uXE
6b
@_0%#d`Rto5 L0R`w@7
r Hcc U3%7N_o V0T0*+e!0 00L2uMyffBNUbNJJcdZ2s0U0
larse@isi.edu0U0 0
*H
]Ȕ,fK<cjRZeLan@Z6,=
fK?yO#8+ Ni*LSfpQg<(aӒ$kTx_AL1>ގ|S1'0#0010 UZA10UWestern Cape10U Cape Town10
U
Thawte10UCertificate Services1(0&UPersonal Freemail RSA 2000.8.30%A0 + a0 *H
1 *H
0 *H
1
020901000324Z0# *H
1FZf roa&/0R *H
1E0C0
*H
0*H
0
*H
@0+0
*H
(0*H
1010 UZA10UWestern Cape10U Cape Town10
U
Thawte10UCertificate Services1(0&UPersonal Freemail RSA 2000.8.30%A0
*H
~l3FE=AJPJ{T<+B\5< >(E[yL}tFK̋nn
U³a|*)W"]"uQd_hƃwPg7\N>;%(إ4 <hU`y
!,+YA#;Tߣ!AڋdpuV7,=Y^w{f\A03ԾT[=-P/KabެDE1iaV
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D71594C.7000400>
